FEATURED PRODUCT - SERIES JBW 10 Watt 15 Watt 30 Watt The Family of JBW Models JBW MODEL TABLE (3) OUTPUT SETTING OVP OUTPUT CURRENT SW RIPPLE NOISE EFFICIENCY (%) LOAD (4) TOLERANCE SETTING CURRENT LIMIT CAPACITANCE (5) (1) (2) MODEL Volts (Volts) (Amps) (Amps) (mV p-p) (mV p-p) 100V a-c 240V a-c 10 WATT MODELS JBW 03-2R0 3.3 ±0.25V 3.75 2 2.5 80 120 69 69 10000µF JBW 05-2R0 5 ±0.25V 5.75 2 2.5 80 120 71 71 10000µF JBW 12-0R9 12 ±0.6V 13.8 0.9 1.12 120 150 78 79 5000µF JBW 15-0R7 15 ±0.75V 17.25 0.7 0.87 120 150 79 80 4000µF JBW 24-0R5 24 ±1.2V 27.6 0.5 0.62 120 150 82 83 2000µF 15 WATT MODELS JBW 05-3R0 5 ±0.25V 5.75 3 3.15 80 120 72 72 10000µF JBW 12-1R3 12 ±0.6V 13.8 1.3 1.37 120 150 74 74 5000µF JBW 15-1R0 15 ±0.75V 17.25 1 1.05 120 150 74 74 4000µF JBW 24-0R7 24 ±1.2V 27.6 0.7 0.74 120 150 76 76 2000µF 30 WATT MODELS JBW 05-6R0 5 ±0.25V 5.6 6 6.3 80 120 75 77 10000µF JBW 12-2R5 12 ±0.6V 13.3 2.5 2.7 120 150 78 79 5200µF JBW 15-2R0 15 ±0.75V 16.6 2 2.1 120 150 79 80 4000µF JBW 24-1R3 24 ±1.2V 26.5 1.3 1.4 120 150 80 81 1000µF (1) Still air rating -10 to +50°C. Derate 30% at 60°C. Consult factory for increased ratings with moving air. (2) Minimum, consult factory. (3) Typical. (4) Acceptable added output capacitance, max. (5) Overvoltage protection for the 10 and 15W models comprises a zener diode across the output to limit voltage. Overvoltage in the 30W models is provided by a shut-down circuit. AN ISO 9001 COMPANY KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 96 Email: hq@kepcopower.com • www.kepcopower.com/jbw.htm The Kepco/TDK JBW series are comprised JBW INPUT CHARACTERISTICS of three groups of affordable power supplies: 10W, 15W and 30W in a PC- SPECIFICATION 10 WATT MODELS 15 WATT MODELS 30 WATT MODELS CONDITION card style. They offer fixed output voltages from 3.3V d-c to 24V d-c for space and a-c nom 100-240V a-c Voltage cost sensitive OEMs. They operate from range 85-265V a-c 0-100% load, any a-c mains in the range 85-265V a-c or d-c range 110-370V d-c -10 to +60°C a d-c input in the range 110-370V d-c. Voltage Note: safety recognition for a-c only range 47-440Hz JBW are fitted with input filters that Frequency suppress conducted emissions below the Current 100V a-c 0.25A typ 0.36A typ 0.65A typ requirements of FCC Class B, VCCI B, 240V a-c 0.15A typ 0.20A typ 0.35A typ EN55011-B and EN55022-B. A flyback EMI conducted FCC Class B converter is used for high efficiency VCCI-B approaching 80 percent. The low profile and EN55011-B EN55022-B small footprint of the JBW power supplies will allow them to fit into tight quarters. Leakage 100V a-c 0.75mA max 0.75mA max 0.75mA max 0.1mA typ 0.2mA typ 0.35mA typ Current at 60Hz JBW are recognized to UL 1950-3, CSA22.2 240V a-c 0.75mA max 0.75mA max 0.75mA max No. 950-95 and EN60950. They bear 0.15mA typ 0.3mA typ 0.35mA typ the CE mark for use in the European Holdup 100V a-c 15msec typ 13msec typ 20msec typ Community. JBW are ideal for cost sensitive Time 240V a-c 140msec typ 150msec typ 160msec typ OEM applications that require a quality Surge 100V a-c 20A max 19.5A max 30A max small power supply with all international and Current 15A typ 15A typ 15A typ safety certifications. 240V a-c 40A max 41A max 60A max 30A typ 30A typ 30A typ Power 100V a-c 0.6 typ Factor 240V a-c 0.45 typ Switching 100KHz Variable 66KHz JBW are CE marked per the Low Voltage Frequency typ typ with load Directive (LVD), EN60950. Input Fuse 2A/250V a-c JBW can be combined into a custom power JBW OUTPUT CHARACTERISTICS assembly for multi-output requirements. Please see pages 131-135 for SPECIFICATION 10 WATT MODELS 15 WATT MODELS 30 WATT MODELS CONDITION details on Kepco’s Power Assembly Program. Source max 0.40% 85-265V a-c Effect Load max 0.80% 0-100% load Effect Temperature max 1% 2% -10 to +50°C Effect JBW INPUT / OUTPUT CABLE KITS Time Effect max 0.40% 0.5-8 hours For 10W and 15W Models – Kit 219-0406 Transient excursion ±4% 50-100% load, For 30W Models – Kit 219-0408 Recovery >50µsec rise -10 to 50°C JBW INPUT / OUTPUT CONNECTORS Start Up 100V a-c 700msec max, 200msec max, 650msec max, See note (1) SOCKET MFRS. POWER TERMINAL 200msec typ 25msec typ 350msec typ Time HOUSING SUPPLY END PIN 240V a-c 700msec max, 100msec max, 320msec max, See note (2) For 10W and 15W Models 200msec typ 25msec typ 130msec typ JST SVH-21T-P1.1 B3P5-VH-B VHR-5N Input LCE T101 (1) The 15W size, 15V and 24V models: 200msec max, 40msec typ for 100V a-c input. P101-05-2/4 H101-05 (2) The 15W size, 15V and 24V models: 100msec max, 40msec typ for 240V a-c input. JST B4B-XH-2 XHP-4 SXH-001T-P0.6 Output LCE P221-04 H221-04 T221-01 100% FIGURE 1 For 30W Models Output Power 70% JST B3P5-VH-B VHR-5N SVH-21T-P1.1 vs. Input LCE P101-05-2/4 H101-05 T101 Ambient Temperature JST B4B-VH-B VHR-4N SVH-21T-P1.1 Output START-UP LCE P101-04 H101-04 T101 JST: Japan Solderless Terminal Mfg. Co., Ltd. LCE: Long Chu Electronics Co., Ltd. -20°C -10°C 0 50°C 60°C KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 Email: hq@kepcopower.com • www.kepcopower.com/jbw.htm 97 OUTLINE DIMENSIONAL DRAWINGS Fractional dimensions in light face type are in inches, JBW GENERAL/ENVIRONMENTAL SPECIFICATIONS dimensions in bold face type are in millimeters. SPECIFICATION RATING/DESCRIPTION CONDITION (1) Mount on 8mm (minimum) standoffs and, Temperature Operating -10 to +60°C for safety reasons, provide a minimum of Start up -20 to +60°C 4mm clearance above the components on Storage -30 to +75°C the top of the PC card. Humidity 20 to 90% RH Wet bulb temperature <35°C 3.74 (95) 2-0 /.13 (3.4) Vibration 5-10Hz 10mm amplitude Sweep time 10 min. .28 (7) .83 HOLES (21) (2) .12 1 hr ea axis .14 (3.5) .20 (5.2) 2 10-200Hz 19.6 m/s (3) Max ..28 (7) (2g) acceleration 1.14 ±0.02 2 (2) Shock Acceleration 588 m/s (60g) 3 shocks ea axis (29 ±0.5) 1.42 (36) 1/2 sine pulse .54 (13.8) .15 (3.8) Duration 11 ±5 msec .06 (1.6) .65 Incoming input-input 2kV pulse, 1µs Normal operation .14 (3.5) 3.46 ±0.02 (16.4) (88 ±0.5) .28 (7) Noise (50Ω termination) TB1 TB2 (3) input-ground 2kV pulse, 1µs 50-60Hz Output Connector Surge input-input 3kV pulse, 100Ω internal Input (3) Withstand 1.2 x 50µsec series resistor Connector input-ground 10W JBW Immunity from 10kV from charged Ground potential Electrostatic Discharge area-ground capacitor C=500 pF, 100Ω series res Safety Standards UL1950-3; Ambient .89 4-0 /.13 (3.4) 3.74 (95) (22.6) CSA22.2 No. 950-95; temperature HOLES .12 3.46 ±0.02 (88 ±0.5) (3) EN60950 50°C max. Max .93 a-c input only .15 (3.8) 1.1 .2 (5.2) (23.7) (28) Conducted EMI FCC Class B, VCCI-B; 1.97 (50) 3.46 ±0.02 (88 ±0.5) EN55011-B; EN55022-B .28 (7) .06 .28 (7) Withstand input-output a-c 3000V, (1.6) ..28 (7) .73 (18.5) Voltage 1min (cutout 10mA) TB1 input-ground a-c 2000V, TB2 5-35°C, 45-85% RH 1min (cutout 10mA) Output Connector Input output-ground a-c 500V, Connector 1min (cutout 10mA) 15W JBW Insulation input-output Resistance input-ground >100 MΩ (d-c 500V) 5-35°C, 45-85% RH output-ground Dimensions 10W English 0.83" x 1.42" x 3.74" 4.80 (122) .20 (5.2) 1.02 4.41 ±0.02 (112 ±0.5) (26) .12 2-0 /..24 (6) ..20 (5) 10W Metric 21mm x 36mm x 95mm (3) MAX HOLES Max 15W English 0.89" x 1.97" x 3.74" .63(16) See outline 1.18 drawings (30) 15W Metric 22.6mm x 50mm x 95mm 2.17 (55) 30W English 1.02" x 2.17" x 4.80" 1.77±0.02 (45 ±0.5) 30W Metric 26mm x 50mm x 122mm .31 (8) .31 (8) .06 Cooling Natural convection .84 (1.6) (21.4) .31 (8) .31 (8) 1) Full output power in still air to +50°C. Derate 30% for still air operation to +60°C. TB1 TB2 Consult factory for power ratings with moving air. Output (2) Non-operating. Connector (3) Operating. Input Connector 30W JBW AN ISO 9001 COMPANY KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 98 Email: hq@kepcopower.com • www.kepcopower.com/jbw.htm