SERIES ABC Model ABC 10-10DM Kepco’s ABC bench power supply embodies ABC MODEL TABLE the latest features: keyboard data entry, interactive digital display, integral GPIB d-c OUTPUT RIPPLE AND NOISE (mV) p-p EFFICIENCY support, software calibration, high 2x SOURCE SWITCHING SPIKE 100% LOAD frequency switch-mode conversion, wide MODEL RANGE POWER FREQUENCY FREQUENCY (50 MHz) 85-264V a-c range input (85-264V a-c) and power factor MAX VOLTS AMPS WATTS TYP MAX TYP MAX TYP % MIN correction. It meets the EN61000-3-2 ABC 10-10DM 0-10 0-10 100 2 4 2 4 3 20 65% harmonic limits. A built-in EN55022 Class B input EMI filter is provided. ABC 15-7DM 0-15 0-7 105 3 7 3 8 4 20 66% ABC 25-4DM 0-25 0-4 100 5 10 5 10 5 20 66% Six different models are available from 0-10V ABC 36-3DM 0-36 0-3 108 7 15 7 15 7 20 67% at 10A to 0-125V at 1A. The built-in GPIB ABC 60-2DM 0-60 0-2 120 12 24 12 24 12 24 68% interface allows ABC to integrate easily into a ABC 125-1DM 0-125 0-1 125 25 50 25 50 25 50 70% test system. The ABC is shipped with an instrumentation software driver using VISA* I/O to facilitate integration. *Virtual Instrumentation Software Architecture Trace showing typical programming speed Trace showing typical recovery of output Trace showing typical for 0-100% voltage,full load voltage when load is step-changed 50-100% output ripple at full load Vertical 2.00V/division Vertical 100 mV/division Vertical 5 mV/division Horizontal 1 ms/division Horizontal 200 µs/division Horizontal 5 ms/division KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 Email: hq@kepcopower.com • www.kepcopower.com/abc.htm 19 FEATURES ABC INPUT CHARACTERISTICS • Direct entry of voltage and current from the keypad with up-down slew buttons. SPECIFICATIONS RATING/DESCRIPTION CONDITION a-c Voltage nominal 100-240V a-c Single phase • A two-line, sixteen character back-lit display prompts you for settings and range 85-264V a-c Wide range reports back what the ABC is delivering to Frequency nominal 50-60Hz >63Hz Input leakage the load. current exceeds spec range 47-63Hz (400Hz) • All full scale and zero adjustments are (1) Current 85V a-c 1.8A made with the keypad and are stored in (1) 120V a-c 1.3A Maximum at non-volatile memory. Calibration is 100W output (1) 240V a-c 0.65A password protected. (1) 264V a-c 0.60A • Kepco’s ABC is controlled over the GPIB Initial Turn-on 5A peak for 85-264V a-c Surge less than 150 µsec 0-100% load and supports SCPI and IEEE 488.2. VISA Power min 120V 0.97 100% load driver provided. Factor 240V 0.93 EMC Immunity To: • ABC are automatic crossover voltage/ Level 3 Radiated RF EN61000-4-3 current stabilizers with full control in both Magnetic Field EN61000-4-8 Level 4 modes. Electrostatic discharge Level 2 4KV contact EN61000-4-2 • Overvoltage and overcurrent protection are Level 3 8KV air discharge standard and fully programmable. Level 3 Conducted RF EN61000-4-6 Level 3 Electrical Fast Transient EN61000-4-4 • The high efficiency switching topology Level 4 Surges EN61000-4-5 used in ABC requires no forced air mech- EMC Emissions: anical cooling. Harmonics (0-2 KHz) EN61000-3-2 Conducted EN61000-3-3 Fluctuation & Flicker • A highly effective multi-stage output filter EN55022 Class B 0.15~30 MHz keeps the output ripple and noise down to EN55022 Class B linear levels...without the heavy metal. Radiated 30~1000 MHz Leakage 120V a-c <0.25mA Source frequency in • A non-volatile memory stores 40 different Current 47-63Hz range <0.5mA 240V a-c combinations of voltage, current, overvoltage, overcurrent and time interval. They may (1) Input current for 100W output. For the 120W ABC 60-2M and 125W ABC 125-1M the output current is proportionally higher. be recalled individually or in a step sequence. ABC OUTPUT CHARACTERISTICS SPECIFICATIONS RATING/DESCRIPTION CONDITION Type of Stabilizer Automatic crossover Voltage/Current Adjustment Range 0 to 100%of rating Voltage/Current Voltage <0.01% E max Source Effect o Nominal ± 15% of input voltage Current <0.01% I max o Voltage <0.01% E max Load Effect o 0 to 100% ABC are CE marked per the Low load change Current <0.02% I max o Voltage Directive (LVD), EN61010-1 Voltage <0.01% E max Temperature o Per degree C and the EMC Directives. (0 to 50°C) Effect Current <0.01% I max o Voltage <0.01% E max Time Effect o 0.5-8.5 hours Current <0.01% I max o Error Sense 0.5V per wire Voltage allowance Isolation Voltage 500V d-c or peak Output to ground Programming Time 2ms max 10%-90% Voltage 0.025% E max Programming o Accuracy (1) Current 0.1% I max o Voltage 0.05% E max Readback/Display o Accuracy Current 0.1% I max o Excursion <5% E max Transient Recovery o 50%-100% load change to Load Change return to 1% E max Recovery <200 µsec o Overshoot None Turn ON/OFF AN ISO 9001 COMPANY Local 24 key keypad Data entry Front panel Remote GPIB (IEEE 488.2) SCPI commands (1) ABC 25-4DM: 0.05%; ABC 36-3DM, ABC 60-2DM and ABC 125-1DM: 0.025%. KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 20 Email: hq@kepcopower.com • www.kepcopower.com/abc.htm ABC GENERAL (ENVIRONMENTAL) SPECIFICATIONS SPECIFICATIONS RATING/DESCRIPTION CONDITION Temperature Operating 0° to +50°C No derating 100% P max o +50°C to +70°C Linear derating to 40% P max o Storage -40° to +85°C Humidity 0 to 95% RH Non condensing operating & storage Shock 20g, 11msec ±50% 3-axes half sine 3 shocks each axis Vibration 5-10Hz 10mm double Non operating 1 hour amplitude each axis 10-55Hz 2g Altitude Sea level to 10,000 ft Cooling Natural convection Inside View of Model ABC 10-10DM ABC PHYSICAL CHARACTERISTICS SPECIFICATIONS RATING/DESCRIPTION CONDITION OUTLINE DIMENSIONAL DRAWINGS Dimensions English 7.9˝ x 4.9˝ x 14˝ ±1/32˝ Fractional dimensions in light face type are in inches, dimensions in bold face type are in millimeters. Metric 200.8 x 124.6 x 355.6 mm ±0.8 mm Tolerance: ± 1/64" (0.4) between mounting holes Weight English 15 lbs. Packed ± 1/32" (0.8) other dimensions for shipping Metric 6.8 Kg a-c Input Front Panel ON/OFF switch Connections Rear Detachable IEC 320 3 wire fused 4.280 108.7 type connector Output Local Front 5 binding posts ±Output; ±Sense; 0.625 Connections Ground 16 Rear 5 terminal barrier strips FRONT VIEW Remote Control One standard GPIB Rear Programming connector SCPI & IEEE 488-2 0.700 2.296 1.892 1.891 0.913 17.8 58.3 48.1 commands 48 23.2 Digital Display Voltage, current, mode, 2 x 16 character Front Panel status, menu, program alphanumeric LCD with LED backlight Rack Adapters 5 1/4˝ x 19˝ RA 71: 1 ABC unit 14.000 RA 72: 2 ABC units 355.6 10.125 13.000 257.2 320.2 RA 71 19” rack adapter for single ABC 1.750 power supply 44.5 7.906 200.8 TOP VIEW RA 72 19” rack adapter for two ABC power supplies REAR VIEW KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102 21 Email: hq@kepcopower.com • www.kepcopower.com/abc.htm