131-6433-001 - JOHNSON/EMERSON

Description

Johnson/Emerson 131-6433-001 SMC Straight Crimp-Type Plug, Captivated Contact

Part Number

131-6433-001

Price

Request Quote

Manufacturer

JOHNSON/EMERSON

Lead Time

Request Quote

Category

Connector RF

Contact Material

Brass

Contact Plating

Nickel

Family

131

Gender

Impedance

50 Ohm

Manufacturer

Emerson Network Pow er Connectivity Solutions

Mounting

Cable Mount

Operating Frequency

0 to 10 GHz

Terminate To

RG179/U Cable|RG187 A/U Cable

Termination Method

Crimp

Type

SMC

Datasheet

Emerson-131-6433-001-datasheet1-1576552028.pdf

769 KiB

Download

Extracted Text

50 Ohm SMC Straight Crimp Type Plug - Captivated Contact INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST CABLE TYPE GOLD PLATED NICKEL PLATED RG-179/U, 187 131-6433-001 131-6433-006 CABLE PART CRIMP GROUP NUMBER HEX RG-179/u, 187 131-6433-001/006 .128 (3.25) 1. Identify connector parts. (2 piece parts - ex- cept bulkhead) 2. Strip cable to dimensions shown. Do not nick braid or center conductor. A wire stripper of correct size is recommended for this step. Twist stranded center conductor into tight bundle and tin. Slide crimp sleeve onto cable as shown. 3. Flare braid and slide cable into body making certain that the cable insulation bottoms in cen- ter contact. Solder Attachment: Solder center conduc- tor to contact through the side access ports and hole in center contact. Use a minimum amount of solder for a full fillet joint. .020 (0.51) diameter solder is recommended. Crimp 50 Ohm connector contacts with 141- 0000-911 dieset in 144-900 tool frame. Crimp 75 Ohm connector contacts with 141-0000- 924 dieset in 144-0000-900 tool frame. Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com SMC - 50 Ohm Connectors INCHES (MILLIMETERS) Specifications CUSTOMER DRAWINGS AVAILABLE UPON REQUEST ELECTRICAL RATINGS RF High Potential Withstanding Voltage: (Vrms minimum, tested at Impedence: 50 ohms 4 and 7 MHz)† Frequency Range: 0-10 GHz Connectors for RG-178 ........................................................................... 500 VSWR: (f = GHz) Straight Cabled Right Angle Cabled Connectors for RG-316 ........................................................................... 700 RG-178 cable ................................... 1.25 + .04f 1.40 + .06f Uncabled receptacles and adapters ........................................................ 600 RG-316 and .086 semi-rigid MECHANICAL RATINGS cable ............................................. 1.20 + .04f 1.30 + .04f Engagement Design: MIL-C-39012, Series SMC Uncabled receptacles ............................ N/A Engagement/Disengagment Force: 16 inch-ounce maximum torque Adapters ........................................... 1.20 + .04f Mating Torque: 35 to 50 inch-ounce Coupling Proof Torque: 100 inch-ounce minimum Working Voltage: (Vrms maximum)† Coupling Nut Retention: 35 pounds minimum Connectors for Cable Type Sea Level 70K Feet Contact Retention: 4 lbs. minimum axial force (captivated contacts) RG-178 ............................................... 250 60 1 inch-ounce minimum torque (uncabled receptacles) RG-316, .086 semi-rigid Cable Retention: Axial Force* Torque uncabled receptacles, adapters ........ 335 85 (pounds) (in-oz) Dielectric Withstanding Voltage: (VRMS minimum at sea level)† Connectors for RG-178 ...................................... 10 N/A Connectors for RG-178 ........................................................................... 750 Connectors for RG-316 ...................................... 20 N/A Connectors for RG-316, .086 semi-rigid Connectors for .086 semi-rigid ........................... 30 16 uncabled receptacles, adapters ........................................................... 1000 * or cable breaking strength whichever is less Corona Level: (Volts minimum at 70,000 feet)† Durability: 500 cycles minimum Connectors for RG-178 ........................................................................... 185 ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of Connectors for RG-316, .086 semi-rigid .................................................. 250 MIL-C-39012 Uncabled receptacles and adapters ........................................................ N/A Temperature Range: - 65°C to + 165°C Insertion Loss: (dB maximum, tested at 4 GHz) Thermal Shock: MIL-STD-202, Method 107, Condition B Straight cable connectors .................................................................. 0.25 dB Corrosion: MIL-STD-202, Method 101, Condition B Right angle cable connectors ............................................................ 0.50 dB Shock: MIL-STD-210, Method 213, Condition C Uncabled receptacles and adapters ........................................................ N/A Vibration: MIL-STD-202, Method 204, Condition D Insulation Resistance: 1000 megohms minimum MATERIAL SPECIFICATIONS Contact Resistance: (milliohms maximum) After Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min or Initial Environmental nickel plated per QQ-N-290 Center contact (straight cabled Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 connectors and uncabled receptacles) .............. 6.0 8.0 .00003" min. Center contact (right angle cabled Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 connectors and adapters) ................................ 12.0 16.0 .00003" min. Outer contact (gold plated connectors) ................. 1.0 N/A Nut Retention Spring: Beryllium copper per QQ-C-533, unplated Outer contact (nickel plated connectors) .............. 2.5 N/A Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 Braid to body (gold plated connectors) ................. 1.0 N/A Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" Braid to body (nickel plated connectors) ............... 2.5 N/A min. or nickel plated per QQ-N-290 RF Leakage: (dB minimum tested at 2.5 GHz) Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001" Cable connectors ............................................................................... -55 dB min. or nickel plated per QQ-N-290 Uncabled receptacles and adapters ........................................................ N/A Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze (lockwashers) per QQ-B-750, gold plated per MIL-G-45204 .00001" min. or ** All gold plated parts inlcude a .00005" min. nickel underplate barrier layer. nickel plated per QQ-N-290 Avoid user injury due to misapplication. See safety advisory definitions inside front cover. MATING ENGAGEMENT FOR SMC SERIES PER MIL-C-39012 PLUG JACK NOTES 1. Inside of contact to meet VSWR, mating charac- PLUG JACK teristics and connector durability when mated with a dia .019/.021 (0.48/0.53) male contact. Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products