µFlashTCP-EP & µFlashPlus zzzzz Pre-installed DOS, TCP/IP and Web Server Software zz zzz Flash File System zzzzz 10BASE-T Ethernet (NE2000 Compatible) zzzzz 386 Ex, 25 MHz / 512K Flash, 512K SRAM zzz PC Compatible Serial Ports zz 89-0040 1 - RS232 µFlashTCP-EP 1 - RS232 / RS485, Software Selectable zzzzz Ready to use, industry standard connectors zzzzz 32 Pin Dip Socket to accept 512K SRAM, 512K Flash, or M-Systems DiskOnChip products zzzzz 7V to 34V DC, 2 Watts nominal 84-0040 zzzzz Rugged Enclosure with µFlashTCP-EP package µFlashPlus zzz 10 Digital I/O lines (optional interface for enclosure) zz Derived from the highly successful µFlashTCP, the µFlashTCP-EP and the µFlashPlus are ready-to-use platforms ideal for bridging existing equipment to Ethernet networks. Providing a practical solution for designs requiring TCP/IP connectivity, the µFlashTCP-EP and the µFlashPlus pack a DOS based computer with Ethernet and PC compatible serial ports into a compact form factor. The powerful Intel 386Ex processor and DOS operating system allow design and debugging in a familiar environment, while industry standard connectors simplify direct connection to 10BASE-T (NE2000 compatible) networks. Additional features include a watchdog timer, on board voltage regulator, 10 digital I/O lines, RS-485 serial port capability and status LEDS. Optional memory expansion of 512K SRAM, 512K Flash, M-Systems DiskOnChip or a battery backed clock calendar with 128K SRAM is available using the 32 Pin Dip socket. The µFlashPlus is the board level version of the µFlashTCP-EP controller, but does not include the rugged enclosure package. The µFlashTCP-EP Development Kit (99-0041) is available for development of either the µFlashTCP-EP or µFlashPlus and includes µFlashTCP-EP controller, Programming Cable, Ethernet Cable, 110 VAC Adapter, Setup Guide, Schematic, and CD with Borland C/C++ V4.52 Compiler, utilities, sample programs and documentation. (220Vin Development Kit 99-0042 available.) Also included within the development kits are sample programs and source code for the TCP/IP stack and web server that can be compiled with the Borland C/C++ package. For I/O accessibility on the µFlashTCP-EP package, the I/O BreakOut upgrade provides 10 I/O lines with ground via wire terminals through the front faceplate. The I/O BreakOut option can be purchased as a peripheral kit (99-0048) or as a complete 89-0047 µFlashTCP-EP I/O BreakOut assembly (89-0047). µFlashTCP-EP I/O BreakOut JK microsystems, Inc. 1403 5th St. Suite D, Davis, CA 95616 Phone (530)297-6073 http://www.jkmicro.com Fax (530)297-6074 µFlashTCP-EP & µFlashPLUS Specifications Processor 25Mhz Intel 386Ex Temperature -20 to 85°C Operating System XDOS Weight 12 oz (340 gm) (MS/PC DOS 3.3 compatible) Dimensions Memory 512K SRAM, 512K Flash without baseplate 3.6" x 4.3" x 1.8" Ethernet 10BASE-T, NE2000 compatible (91.4mm x 109.2mm x 44.5mm) Link status and Activity LEDs with baseplate 4.6" x 4.3" x 1.8" Serial Port 1 RS-232 with 5 handshake lines (116.8mm x 109.2mm x 44.5mm) COM1, address 0x3F8, IRQ 4 Digital I/O 10 Bits (P3.0- P3.5 & P1.4- P1.7) 115200 baud maximum Pin configurable as input or output Serial Port 2 RS-232 no handshaking or P3.3 and P3.4 configurable RS-485 half duplex, as interrupts COM2, address 0x2F8, IRQ 3 8mA source/sink 115200 baud maximum Watchdog Programmable timeout, Optional Features Generates processor NMI Sync. Serial Full duplex, • Additional M-Systems DiskOnChip, 512K SRAM, Independent Rx and Tx clocks, 512K Flash or Battery backed clock calendar with Master or Slave operating mode 128K SRAM (20-0074). Supply Voltage 7-34V DC ± 10% • Digital I/O interface option using I/O BreakOut Kit Power Consumption 2 Watts (nominal) (99-0048) or purchasing preinstalled I/O BreakOut Humidity 5 - 90%, non-condensing package (89-0047). JK microsystems, Inc. 1403 5th St. Suite D, Davis, CA 95616 Phone (530)297-6073 http://www.jkmicro.com Fax (530)297-6074