® Mas-Con Hand Assembly Tools Tooling • Hand Tool – ideal for maintenance, repair or prototyping. • Low Volume Hand Tool MRT Part No. Connector Spacing MRT-100F .100" (2.54mm) MRT-156F .156" (3.96 mm) • Terminates discrete wire into end and through connectors. • Operator friendly • Robust construction • Low Volume Manual Tool MMIT Part No. Connector Spacing Weight MMIT-100F .100" (2.54 mm) .3 lbs. (0.15 kg) MMIT-156F .156" (3.96 mm) .3 lbs. (0.15 kg) • Lightweight – easy to use. • Automatically indexes to next circuit position. • Medium Volume Manual Tool MCT Part No. Description Weight MCT* Manual Hand Tool .6 lbs. (0.28 kg) * For use with interchangeable nose sections – CTD. Order nose sections separately. (See page 18) 17 ® Mas-Con Hand Assembly Tools Tooling • Operates on 85 PSI air pressure. • Includes filter regulator and hose. Pneumatic Tool PCT Part No. Description Weight PCT* Pneumatic Hand Tool .7 lbs. (0.31 kg) PCT BM* Bench Mount with Foot Pedal 5.0 lbs. (2.25 kg) * For use with interchangeable nose sections – CTD. Order nose sections separately. • For End connectors – type CE, CEH, CEP • For single wire. • For use with discrete wire. • Use with MCT, PCT or PCTBM Tools. Interchangeable Nose Section CTD Part No. Spacing Tool CTD-100F .100" (2.54 mm) MCT, PCT CTD-156F .156" (3.96 mm) MCT, PCT 18 ® Mas-Con Termination Tools Tooling • for use with discrete wire • controlled cycle head automatically indexes to next circuit position • connectors can be loaded at any point in feed track • operated by foot pedal Manual Tool Part No. Description ECT Motor, track and foot pedal ECT-100F .100" (2.54 mm) termination nose and track insert ECT-156F .156" (3.96 mm) termination nose and track insert • automatic track fed machine • connectors are loaded onto the track and automatically fed into termination area • for MAS-CON end connectors with 2.54 mm spacing • quick termination of flat cable • operated by foot pedal • Operates on 85 PSI air Manual Tool Spacing .100" (2.54 mm) Part No. CTM28F-100FA • for use with MAS-CON End connectors on reels • connectors on reels are automatically fed into the termination apress • supplied with foot pedal and hose assembly • Operates on 85 PSI air Pneumatic Reel Fed Tool CTM Spacing .100" (2.54 mm) .156" (3.96 mm) Part No. CTM28F-100FR CTM24F-156FR 19 ® Mas-Con On-Board Harness System for High Volume Requirements Tooling Connectors in 2.54 mm and 3.96 mm spacing. Lightest tool in the industry. Connectors are snapped into the fixtures, the harness is constructed by inserting wires into retention fingers of each circuit, apply the PPHT tool to each fixture and mass terminate in one operation. For use with discrete wire and flat cable applications. Pneumatic harness board hand tool for MAS-CON End and Through – PPHT Part No. Spacing Description Color Weight .100" 2.9 lbs PPHT-100F Red (2.54 mm) (1.3 kg) Pneumatic Hand Tool .156" 2.9 lbs PPHT-156F White (3.96 mm) (1.3 kg) Harness board fixtures hold connectors in place and provide locking posts for the PPHT tool during termination. The two piece fixture/base concept provides maximum utilization of your harness system investment. FE – End Connector, cuts off wire flush FT – Through Connector, no cut off FC – Through Connector, selection cut off Harness Board Fixtures Description for End connectors cut off For Through connectors no cut off For Through connectors select cut off Spacing .100" (2.54 mm) .156" (3.96 mm) .100" (2.54 mm) .156" (3.96 mm) .100" (2.54 mm) .156" (3.96 mm) Fixture with base PPHT-100FE PPHT-156FE PPHT-100FT PPHT-156FT PPHT-100FC PPHT-156FC Extra bases (two provided with each fixture). Boards can be prepared with these low cost bases in place and stored. Each board is then ready for instant installation of fixtures to meet current production requirements. Bases for Mounting Fixtures Part Number Packaging Qty CP11029C01 1 each 20