Manufacturers
ITT INDUSTRIES PL-55B
Description
ITT Industries PL-55B Bell and Gossett Booster Pump. Thermally Protected | Max. Liquid Temp. 225° F/107° C | Max. Pressure 150 PSI | Class F | Lead Free | Max. Pressure 150 PSI (10.3 bar) | Max. Liquid Temp. 225°F (107°C) | 2/5 HP | 6 3/8" (162mm) | 13.1 lbs (6.0 kg)
Part Number
PL-55B
Price
Request Quote
Manufacturer
ITT INDUSTRIES
Lead Time
Request Quote
Category
PRODUCTS - P
Features
- 25% more efficient than competition
- Advanced close-coupled design increases pump life and efficiency, assures dependable seasonal start-ups and can easily handle difficult water conditions
- B&G’s powerful, dry-motor design delivers exceptional performance
- Completely maintenance free
- Double sided stainless steel neck ring for optimum efficiency
- Permanently oil lubricated
- Precision-machined and balanced alloy steel rotor for superior performance.
- Solid “Stiff-Shaft” design is constructed of high-strength alloy steel impervious to cracking caused by thermal stresses.
- Tough, durable seal system features a carbon/silicon carbide seal on a stainless steel shaft sleeve for long life and rugged operation
- XL-11 Precision-Crafted Bearing System
Datasheet
Extracted Text
SUBMITTAL A-135E JOB: REPRESENTATIVE: UNIT TAG: ORDER NO. DATE: ENGINEER: SUBMITTED BY: DATE: CONTRACTOR: DATE: APPROVED BY: Permanently Lubricated * Iron & Lead-Free Bronze Booster Pumps DESCRIPTION CONSTRUCTION MATERIALS The Series PL™ close coupled booster pumps are Booster Body: Cast Iron or Bronze specifically designed for quiet operation in hydronic, Face Plate: Stainless Steel radiant and geothermal heating and cooling systems. Impeller: 30% Glass Filled Noryl® These inline permanently lubricated pumps are (PL-55 & PL-130): Glass Filled PPS * Shaft: Carbon Steel available in cast iron or lead-free bronze body (PL-55 & PL-130): Stainless Steel construction. Shaft Sleeve: Stainless Steel OPERATING DATA (PL-55 & PL-130): None Maximum working Pressure: 150 psi (10 Bar) Seal: Mechanical, Carbon on Silicon Carbide Maximum Operating Temperature: 225°F (107°C) Motor Bearings: Sealed Precision Steel Ball Bearing Permanently Lubricated Motor Type: ODP Elastomers: EPDM SCHEDULE CAST IRON BRONZE STANDARD 60 CYCLE SINGLE PHASE MODEL PART MODEL PART MOTOR CHARACTERISTICS NUMBER NUMBER QTY. NUMBER NUMBER QTY. HP VOLTAGE F.L. AMPS RPM TAGGING INFORMATION PL-30 1BL012 PL-30B 1BL013LF 1/12 115 1.4 2650 PL-30 1BL014 PL-30B 1BL015LF 1/12 230 0.8 2650 PL-36 1BL001 PL-36B 1BL003LF 1/6 115 2.1 3300 PL-36 1BL006 PL-36B 1BL008LF 1/6 230 1.1 3300 PL-45 1BL002 PL-45B 1BL004LF 1/6 115 2.1 3300 PL-45 1BL007 PL-45B 1BL009LF 1/6 230 1.1 3300 PL-50 1BL016 PL-50B 1BL017LF 1/6 115 1.8 3300 PL-50 1BL018 PL-50B 1BL019LF 1/6 230 1.0 3300 PL-55 1BL032 PL-55B 1BL068LF 2/5 115 4.7 3250 PL-55 1BL033 PL-55B 1BL069LF 2/5 230 2.4 3250 PL-75 1BL034 PL-75B 1BL035LF 1/6 115 2.1 3400 PL-75 1BL036 PL-75B 1BL037LF 1/6 230 1.1 3400 PL-130/2" 1BL063 PL-130B/2" 1BL065LF 2/5 115 4.8 3200 PL-130/2" 1BL064 PL-130B/2" 1BL066LF 2/5 230 2.4 3200 PL-130/3" 1BL070 PL-130B/3" 1BL072LF 2/5 115 4.8 3200 PL-130/3" 1BL071 PL-130B/3" 1BL073LF 2/5 230 2.4 3200 Note: Where potable water is pumped, use a bronze booster. PL boosters equipped with a drip-proof motor are recommended for indoor use only. * Contains less than 0.25% lead content on wetted surfaces. Bell & Gossett © COPYRIGHT 2009 ITT Corporation SERIES PL - Permanently Lubricated Booster Pumps A-135E DIMENSIONS AND WEIGHTS APPROXIMATE DIMENSIONS - INCHES (mm) FLANGE SIZE SHIPPING WT. MODEL NO. INCHES - NPT MOTOR HP A B C D E LBS. (KG) 3/4, 1, PL-30 1/12 8 5/8 (219) 6 3/8 (162) 7 1/8 (181) 4 3/16 (106) 4 3/8 (111) 11.6 (5.3) 1-1/4 & 1-1/2 3/4, 1, PL-36 1/6 8 5/8 (219) 6 3/8 (162) 7 1/8 (181) 4 3/16 (106) 4 3/8 (111) 13.1 (6.0) 1-1/4 & 1-1/2 1, 1-1/4 PL-45 1/6 9 1/8 (232) 8 1/2 (216) 7 1/4 (184) 4 5/8 (117) 4 1/2 (114) 14.5 (6.6) & 1-1/2 1, 1-1/4 PL-50 1/6 9 1/8 (232) 8 1/2 (216) 7 1/4 (184) 4 5/8 (117) 4 1/2 (114) 14.5 (6.6) & 1-1/2 3/4, 1, PL-55 2/5 9 9/16 (243) 6 3/8 (162) 7 15/16 (202) 4 3/16 (106) 4 3/4 (121) 13.1 (6.0) 1-1/4 & 1-1/2 PL-75 2 1/6 9 15/16 (252) 8 1/2 (216) 7 3/8 (187) 5 3/16 (132) 4 5/8 (117) 18.5 (8.4) PL-130/2" 2 2/5 10 3/4 (273) 8 1/2 (216) 8 1/4 (210) 5 3/16 (132) 5 1/8 (130) 22 (10) PL-130/3" 3 2/5 10 3/4 (273) 8 1/2 (216) 8 1/4 (210) 6 (152) 5 1/8 (130) 27 (12.2) Dimensions are approximate and subject to change. Contact factory for certified dimensions. PERFORMANCE CHARACTERISTICS CURVES TYPICAL SPECIFICATIONS The contractor shall furnish and install inline pumps as illustrated on the plans and in accordance with the following specifications: 1. The pumps shall be of the horizontal, permanently lubricated type, specifically designed and guaranteed for quiet operation. 2. The pumps shall have a steel shaft supported by permanently lubricated, sealed precision ball bearings. The pumps are to be equipped with a water-tight seal to prevent leakage. Mechanical seal faces to be carbon on silicon carbide. The motor shall be non-overloading at any point on the pump performance curve. 3. The motor shall be of the drip-proof, sealed precision ball-bearing, quiet-operating construction. The permanent split-capacitor motor shall be equipped with thermal overload protection. 4. Pumps to be suitable for 225°F (107°C) operating temperature at 150 psig (10 bar) working pressure. The pumps shall be ITT Bell & Gossett Model No. PL-__________ with a capacity of __________ GPM at __________ feet of head. ITT 8200 N. Austin Avenue Morton Grove, IL 60053 Phone (847)966-3700 Facsimile (847)966-9052 www.bellgossett.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PL-55B have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods