Manufacturers
ITOX G5C900-B
Description
Itox G5C900-B CPU Board with Intel 945GME chipset, ICH7M 2GB SODIMM Memory
Part Number
G5C900-B
Price
Request Quote
Manufacturer
ITOX
Lead Time
Request Quote
Category
COM EXPRESS MOTHERBOARDS
Specifications
AUDIO
Supports AC97 digital interface.
BIOS
SPI interface BIOS (8Mbit).
CHIPSET
Intel chipset - Intel 945GME Graphics Memory Controller Hub (GMCH), - Intel 82801GB I/O Controller Hub (ICH7M).
CONNECTORS
COM Express connectors - Two 220-pin COM Express standard connectors. 1 CPU fan connector.
DAMAGE FREE INTELLIGENCE
Monitors CPU temperature and overheat alarm. Monitors CPU Smart fan speed and failure alarm. Monitors Vcore/1.8V/1.5V voltages and failure alarm.
DIMENSIONS
Basic COM Express form factor. 95mm x 125mm (3.74" x 4.9"). Compliance - PICMG COM Express R1.0 basic form factor, Type 2.
EXPANSION INTERFACES
1 PCIe x16. 3 PCIe x1. 4 PCI (Master). Supports 1 Gigabit LAN interface. Supports LPC (Low Pin Count) interface. Supports SMBus interface. Supports 2 SATA 2.0 interfaces. Supports AC’97 audio interface. Supports 8 USB 2.0 interfaces. Supports LVDS 18/24-bit Dual channel interface. Supports RGB, H-sync/V-sync VGA signals. Supports 8-bit Digital I/O interface. Supports 1 IDE interface. Supports PCI 2.3 interface.
GRAPHICS
Internal graphics features - DVMT 3.0 support, - Intel Dual-Frequency Graphics Technology, - Intel Smart 2D Display Technology, - Dual Independent display pipes, - Intel GMA 950 Integrated Graphics Engine. Integrated graphics interface - Analog CRT, - Integrated 400MHz RAMDAC, - Analog monitor supports up to UXGA, - LVDS interface, - Panel support up to UXGA (1600x1200), - 25MHz-112MHz single/dual channel @ 18bpp, TFT panel type support.
HUMIDITY
Operating: 10% to 90%.
IDE
Supports up to 2 IDE devices. Supports up to Ultra ATA 100.
LAN
One Realtek RTL8111C PCI Express Gigabit controller. Supports 10Mbps, 100Mbps and 1Gbps data transmission. IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant.
PACKING LIST
1 system board. 1 user’s manual. 1 "Main Board Utility" CD. 1 QR (Quick Reference).
POWER
Input: 12V, 5VSB. Max load power: 130W.
PROCESSOR
Intel Core Duo/Solo processor. Intel Core2 Duo processor - 667MHz/533MHz system data bus. Intel Celeron M processor - 533MHz system data bus (on Ultra Low Voltage). Processor socket: mPGA478M. Cooling options - Heatspreader, - Heat sink with cooling fan.
Intel Core Solo
REGULATORY
EMC: CE, FCC Part 15 Class B.
SATA
Supports two Serial ATA interfaces compliant with SATA 1.0 specification. Supports SATA devices with speed up to 1.5Gb/s.
SYSTEM MEMORY
One 200-pin SODIMM socket (1.8V). Supports up to 2GB DDR2 SDRAM. Supports 533MHz and 667MHz DDR2 SDRAM.
TEMPERATURE
Operating: 0oC to 60oC. Non-operating: -40oC to 85oC.
Features
- CHIPSET - Intel 945GME/ICH7M
- CPU - Intel Core Duo/Solo. Intel Core2 Duo. Intel Celeron M.
- DIMENSIONS - COM Express Basic 95mm x 125mm (3.74" x 4.9")
- DISPLAY OUTPUTS - VGA/LVDS/SDVO
- EXPANSION - 8 USB, 1 PCIe x16, 3 PCIe x1, 4 PCI, 2 SATA, 8-bit DIO
- LAN - 1 Gigabit LAN
- MEMORY - 1 DDR2 SDRAM up to 2GB
Datasheet
Extracted Text
G5C900-B G5C900-B G5C900-B G5C900-B G5C900-B Basic COM Express Board Basic COM Express Board Basic COM Express Board Basic COM Express Board Basic COM Express Board PROCESSOR EXPANSION INTERFACES (TYPE II) ® TM • Intel Core Duo/Solo processor • Supports 1 Gigabit LAN interface ® TM Intel Core 2 Duo processor • Supports LPC (Low Pin Count) interface - 667MHz/533MHz system data bus • Supports SMBus interface ® ® • Intel Celeron M processor • Supports 2 SATA 2.0 interfaces - 533MHz system data bus (on Ultra Low Voltage) • Supports AC’97 audio interface • Processor socket: mPGA478M • Supports 8 USB 2.0 interfaces • Cooling options • Supports 5 PCIe x1 interfaces - Heatspreader • Supports LVDS 18/24-bit Dual channel interface - Heat sink with cooling fan • Supports RGB, H-sync/V-sync VGA signals • Supports 8-bit Digital I/O interface CHIPSET • Supports 1 IDE interface ® • Intel chipset • Supports PCI 2.3 interface ® - Intel 945GME Graphics Memory Controller Hub (GMCH) SERIAL ATA INTERFACE ® - Intel 82801GB I/O Controller Hub (ICH7M) • Supports two Serial ATA interfaces compliant with SATA 1.0 specification SYSTEM MEMORY • Supports SATA devices with speed up to 1.5Gb/s • One 200-pin SODIMM socket (1.8V) • Supports up to 2GB DDR2 SDRAM IDE INTERFACE • Supports 533MHz and 667MHz DDR2 SDRAM • Supports up to 2 IDE devices • Supports up to Ultra ATA 100 BIOS • SPI interface BIOS (8Mbit) DAMAGE FREE INTELLIGENCE GRAPHICS FEATURES • Monitors CPU temperature and overheat alarm • Monitors CPU Smart fan speed and failure alarm • Internal graphics features - DVMT 3.0 support • Monitors Vcore/1.8V/1.5V voltages and failure alarm ® - Intel Dual-Frequency Graphics Technology ® CONNECTORS - Intel Smart 2D Display Technology - Dual Independent display pipes • COM Express connectors - Intel GMA 950 Integrated Graphics Engine - Two 220-pin COM Express standard connectors • Integrated graphics interface • 1 CPU fan connector - Analog CRT TEMPERATURE - Integrated 400MHz RAMDAC o o • Operating: 0 C to 60 C - Analog monitor supports up to UXGA o o • Non-operating: -40 C to 85 C - LVDS interface - Panel support up to UXGA (1600x1200) HUMIDITY - 25MHz-112MHz single/dual channel @ 18bpp, TFT • Operating: 10% to 90% panel type support POWER LAN FEATURES • Input: 12V, 5VSB • One Realtek RTL8111C PCI Express Gigabit controller • Max load power: 130W • Supports 10Mbps, 100Mbps and 1Gbps data transmission • IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) REGULATORY compliant • EMC: CE, FCC Part 15 Class B AUDIO FEATURES PCB • Supports AC97 digital interface • Dimensions - Basic COM Express form factor EXPANSION INTERFACES - 95mm (3.74") x 125mm (4.9") • 1 PCI Express x16 • Compliance • 3 PCI Express x1 - PICMG COM Express R1.0 basic form factor, Type 2 • 4 PCI (Master) Page 1/3 Heatspreader 1 2 4 3 5 Heatspreader on G5C900-B Bottom View of the Heatspreader (top view) •"1" to "5" denote the locations of the thermal pads designed to contact the corresponding components that are on G5C900-B. •Remove the plastic covering from the thermal pads prior to mounting the heatspreader onto G5C900-B. Dimensions Top View B B "A" and "A1" mounting holes •These mounting holes are used to secure the heatspreader onto G5C900-B. • "A" - Use M2.5 screws with minimum length of 3.7 mm. "A1" - Use M2.5 screws with minimum length of 13 mm. A A "B" mounting posts •These mounting posts are used to mount the heatspreader and G5C900-B assembly onto the carrier A1 A1 board. • Use M2.5 screws with minimum length of 15 mm. B BB Side View Bottom View Page 2/3 Heat Sink with Cooling Fan 1 3 2 Heat Sink with Cooling Fan on G5C900-B Bottom View of the Heat Sink (top view) • "1" to "3" denote the locations of the thermal pads designed to contact the corresponding components that are on G5C900-B. • Remove the plastic covering from the thermal pads prior to mounting the heat sink onto G5C900-B. Dimensions Top View A A "A" mounting posts • These mounting posts are used to mount the heat sink and G5C900-B assembly onto the carrier board. • Use M2.5 screws with minimum length of 15 mm. A A A Side View Bottom View Page 3/3 All product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are subject to change without prior notice. © March 25, 2011 DFI-ITOX, LLC.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the G5C900-B have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods