G4S300-B-G Intel® 865G chipset Socket 478-based Intel® microATX board PROCESSOR (Socket 478-based Intel®) ONBOARD AUDIO FEATURES ® ® • Intel Pentium 4 Processor with Hyper-Threading Technology • 18-bit stereo full-duplex codec with independent variable sampling rate – 800MHz/533MHz system data bus • High quality differential CD input ® ® • Intel Pentium 4 Processor • True stereo line level outputs – 533MHz/400MHz system data bus • S/PDIF-out interface ® ® ® ® • Intel Celeron D and Intel Celeron Processors • 2-channel audio output – 533MHz/400MHz system data bus ONBOARD LAN FEATURES CHIPSET • Uses Realtek RTL8101L fast ethernet controller • Intel® 865G chipset • Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY – Intel® 865G Chipset Graphics Memory Controller Hub (GMCH) 32-bit PCI master interface – Intel® 82801EB I/O Controller Hub (ICH5) • Integrated power management functions • Full duplex support at both 10 and 100 Mbps SYSTEM Memory • Supports IEEE 802.3u auto-negotiation • Two 184-pin DDR DIMM sockets • Supports wire for management • Supports dual channel (128-bit wide) memory interface PCI IDE INTERFACE • Supports up to 2GB system memory • Synchronous operation with processor system bus • Supports ATA/33, ATA/66 and ATA/100 hard drives – PC2700/PC3200 (DDR333/DDR400) with 800MHz FSB CPU • PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) DDR333 will run at 320MHz memory frequency when used with • Bus mastering reduces CPU utilization during disk transfer 800MHz FSB CPU • Supports ATAPI CD-ROM, LS-120 and ZIP – PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU SATA IDE INTERFACE – PC2100 (DDR266) with 400MHz FSB CPU • Supports two SATA (Serial ATA) interfaces which are compliant with • Supports non-ECC (x64) DIMM using 128Mb, 256Mb, or 512Mb SATA 1.0 specification (1.5Gbps interface) • Supports unbuffered DIMMs ACCELERATED GRAPHICS PORT (A.G.P) BIOS • Supports 1.5V AGP 8X (2.13GB/sec) and AGP 4X (1066MB/sec) for 3D ® • Award BIOS, Windows 98SE/2000/ME/XP Plug and Play compatible graphics applications (AGP 2X and 3.3V AGP card are NOT supported) • Supports SCSI sequential boot-up • Supports AGP 3.0 and AGP 2.0 spec. • Flash EPROM for easy BIOS upgrades • AGP 8x data rate provides a theoretical maximum bandwidth of 2.13GB/sec • Supports DMI 2.0 function REAR PANEL I/O PORTS • 4Mbit flash memory • 4 USB 2.0/1.1 ports ENERGY EFFICIENT DESIGN • 1 RJ45 LAN port • Supports ACPI specification and OS Directed Power Management • 1 DB-9 serial port • Supports ACPI STR (Suspend to RAM) function • 1 DB-15 VGA port • Wake-On-Events include: • 1 DB-25 parallel port – Wake-On-Keyboard/Mouse • 1 mini-DIN-6 PS/2 mouse port – Wake-On-USB Keyboard • 1 mini-DIN-6 PS/2 keyboard port – Wake-On-Ring (external modem) • 3 audio jacks: line-out, line-in and mic-in – Wake-On-LAN I/O CONNECTORS – RTC timer to power-on the system • 2 connectors for 4 additional external USB 2.0/1.1 ports • System power management supported • 1 connector for 1 external serial port • CPU stopped clock control • 1 connector for 1 external game/MIDI port • Microsoft®/Intel® APM 1.2 compliant • 1 connector for external line-out and mic-in jacks • Soft Power supported - ACPI v1.0a specification • 1 CD-in internal audio connector • AC power failure recovery • 1 S/PDIF-out connector (audio digital interface) ONBOARD GRAPHICS FEATURES • 1 connector for IrDA interface • Graphics Memory • 2 Serial ATA connectors – Shares 1MB/4MB/8MB/16MB/32MB of the system memory in DOS mode • 2 IDE connectors – Uses Dynamic Video Memory Technology (DVMT) in Windows mode • 1 floppy connector • Graphics controller • 2 ATX power supply connectors – Core frequency of 266MHz • 1 Wake-On-LAN connector – 350MHz integrated 24-bit RAMDAC • 3 fan connectors for CPU fan, chassis fan and 2nd fan – Analog display up to 2048x1536 @ 60Hz refresh CABLES – 3D setup and render engine - Discrete, Triangles, Strips and fans • 2 IDE cables – Per pixel perspective corrected texture mapping • 1 FDD cable – Software DVD at 30fps, full screen • 1 SATA cable • 2D graphics features • 1 SATA power cable – Optimized 256-bit BLT engine EXPANSION SLOTS – 32-bit alpha blended cursor • 1 AGP slot; 1.5V AGP 4x/8x card (supports AGP and ADD cards) – Programmable 3-color transparent cursor • 3 PCI slots • 3D graphics features – 200 megapixels/sec fill rate COMPATIBILITY – Maximum 3D resolution: 1600x1200x32 @ 85Hz • PCI 2.2 and AC ’97 compliant – Flat and Gouraud shading ® • Intel AGP version 3.0 – 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering PCB – Vertex and programmable pixel fogging and atmospheric effects • 4 layers, microATX form factor – Double and triple render buffer • 24.5cm (9.64") x 20cm (7.87") • Software drivers SAFETY ® – Windows 98SE/2000/ME/XP ® • UL, cUL, FCC Class B, CE – Windows NT 4.0 ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are subject to change without prior notice. © 2006 ITOX, LLC MA-SD-141-1006