INTERNATIONAL RECTIFIER IRF6215L-103
Description
HEXFET D2PAK
Part Number
IRF6215L-103
Price
Request Quote
Manufacturer
INTERNATIONAL RECTIFIER
Lead Time
Request Quote
Category
PRODUCTS - I
Datasheet
Extracted Text
PD - 91643 IRF6215S/L ® HEXFET Power MOSFET l Advanced Process Technology D l Surface Mount (IRF6215S) V = -150V DSS l Low-profile through-hole (IRF6215L) l 175°C Operating Temperature R = 0.29Ω DS(on) l Fast Switching G l P-Channel I = -13A D l Fully Avalanche Rated S Description Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. 2 The D Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the 2 D Pak TO-262 highest power capability and the lowest possible on- resistance in any existing surface mount package. The 2 D Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRF6215L) is available for low- profile applications. Absolute Maximum Ratings Parameter Max. Units I @ T = 25°C Continuous Drain Current, V @ -10V� -13 D C GS I @ T = 100°C Continuous Drain Current, V @ -10V� -9.0 A D C GS I Pulsed Drain Current �� -44 DM P @T = 25°C Power Dissipation 3.8 W D A P @T = 25°C Power Dissipation 110 W D C Linear Derating Factor 0.71 W/°C V Gate-to-Source Voltage ± 20 V GS E Single Pulse Avalanche Energy�� 310 mJ AS I Avalanche Current� -6.6 A AR E Repetitive Avalanche Energy� 11 mJ AR dv/dt Peak Diode Recovery dv/dt �� -5.0 V/ns T Operating Junction and -55 to + 175 J T Storage Temperature Range STG °C Soldering Temperature, for 10 seconds 300 (1.6mm from case ) Thermal Resistance Parameter Typ. Max. Units R Junction-to-Case ––– 1.4 θJC °C/W R Junction-to-Ambient ( PCB Mounted,steady-state)** ––– 40 θJA 5/13/98 IRF6215S/L Electrical Characteristics @ T = 25°C (unless otherwise specified) J Parameter Min. Typ. Max. Units Conditions V Drain-to-Source Breakdown Voltage -150 ––– ––– V V = 0V, I = -250μA (BR)DSS GS D ΔV /ΔT Breakdown Voltage Temp. Coefficient ––– -0.20 ––– V/°C Reference to 25°C, I = -1mA� (BR)DSS J D ––– ––– 0.29 V = -10V, I = -6.6A � GS D R Static Drain-to-Source On-Resistance Ω DS(on) ––– ––– 0.58 V = -10V, I = -6.6A � T = 150°C GS D J V Gate Threshold Voltage -2.0 ––– -4.0 V V = V , I = -250μA GS(th) DS GS D g Forward Transconductance 3.6 ––– ––– S V = -25V, I = -6.6A� fs DS D ––– ––– -25 V = 150V, V = 0V DS GS μA I Drain-to-Source Leakage Current DSS ––– ––– -250 V = 120V, V = 0V, T = 150°C DS GS J Gate-to-Source Forward Leakage ––– ––– 100 V = -20V GS nA I GSS Gate-to-Source Reverse Leakage ––– ––– -100 V = 20V GS Q Total Gate Charge ––– ––– 66 I = -6.6A g D Q Gate-to-Source Charge ––– ––– 8.1 nC V = -120V gs DS Q Gate-to-Drain ("Miller") Charge ––– ––– 35 V = -10V, See Fig. 6 and 13 �� gd GS t Turn-On Delay Time ––– 14 ––– V = -75V d(on) DD t Rise Time ––– 36 ––– I = -6.6A r D t Turn-Off Delay Time ––– 53 ––– R = 6.8Ω d(off) G t Fall Time ––– 37 ––– R = 12Ω, See Fig. 10 �� f D Between lead, L Internal Source Inductance 7.5 S ––– ––– nH and center of die contact C Input Capacitance ––– 860 ––– V = 0V iss GS C Output Capacitance ––– 220 ––– pF V = -25V oss DS C Reverse Transfer Capacitance ––– 130 ––– ƒ = 1.0MHz, See Fig. 5� rss Source-Drain Ratings and Characteristics Parameter Min. Typ. Max. Units Conditions D I Continuous Source Current MOSFET symbol S ––– ––– -11 (Body Diode) showing the A G I Pulsed Source Current integral reverse SM ––– ––– -44 (Body Diode) � p-n junction diode. S V Diode Forward Voltage ––– ––– -1.6 V T = 25°C, I = -6.6A, V = 0V � SD J S GS t Reverse Recovery Time ––– 160 240 ns T = 25°C, I = -6.6A rr J F Q Reverse Recovery Charge ––– 1.2 1.7 μC di/dt = -100A/μs�� rr t Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by L +L ) on S D Notes: � Repetitive rating; pulse width limited by � Pulse width ≤ 300μs; duty cycle ≤ 2%. max. junction temperature. ( See fig. 11 ) � Uses IRF6215 data and test conditions � Starting T = 25°C, L = 14mH J R = 25Ω, I = -6.6A. (See Figure 12) G AS � I ≤ -6.6A, di/dt ≤ -620A/μs, V ≤ V , SD DD (BR)DSS T ≤ 175°C J ** When mounted on 1" square PCB (FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. IRF6215S/L 100 100 VGS VGS TOP - 15V TOP - 15V - 10V - 10V - 8.0V - 8.0V - 7.0V - 7.0V - 6.0V - 6.0V - 5.5V - 5.5V - 5.0V - 5.0V BOT TOM - 4.5V BOTTOM - 4.5V 10 10 -4.5V 20μ s PU LSE W IDTH 20μ s PULSE W IDTH -4.5V T = 25°C T = 25°C TT = = 175°C 175°C c J J C A 1 1 A 1 10 100 1 10 100 -V , Drain-to-Source Voltage (V) -V , Drain-to-Source Voltage (V) DS DS Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 2.5 100 I D = -11A 2.0 T = 25°C J 1.5 T = 175°C J 10 1.0 0.5 V = -50V DS V = -10V 20μs PULSE W IDTH GS 0.0 1 A A -60 -40 -20 0 20 40 60 80 100 120 140 160 180 456 789 10 T , Junction Tem perature (°C) -V , Gate-to-Source Voltage (V) J GS Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature -I , Drain-to-Source C urrent (A) -I , D rain-to-S ource C urrent (A ) D D R , Drain-to-S ource O n Resistance DS(on) -I , Drain-to-Source Current (A) D (N orm alized) IRF6215S/L 2000 20 V = 0V , f = 1MHz I = -6.6A GS D V = -120V DS C = C + C , C SHORTED iss gs gd ds V = -75V C = C DS rss gd C = C + C V = -30V oss ds gd 1600 DS 16 C iss 1200 12 C oss 800 8 C rss 400 4 FO R TEST CIRCUIT SEE FIGURE 13 0 0 A A 1 10 100 0 20406080 -V , Drain-to-Source Voltage (V) Q , Total Gate Charge (nC) DS G Fig 6. Typical Gate Charge Vs. Fig 5. Typical Capacitance Vs. Gate-to-Source Voltage Drain-to-Source Voltage 100 100 OPE RATION IN THIS AREA LIMITE D BY R DS(on) 10μs T = 175°C J 10 T = 25°C J 100μs 10 1 1m s T = 25°C T = 25°C C C T = 175°C J Single Pulse 10ms VGS = 0V 0.1 A 1 A 0.2 0.6 1.0 1.4 1.8 1 10 100 1000 -V , Drain-to-Source Voltage (V) -V , Source-to-Drain Voltage (V) SD DS Fig 7. Typical Source-Drain Diode Fig 8. Maximum Safe Operating Area Forward Voltage -I , Reverse Drain Current (A) C, Capacitance (pF) SD -I , Drain Current (A) D -V , Gate-to-Source Voltage (V) GS IRF6215S/L R 15 D V DS V GS D.U.T. 12 R G - + V DD 9 -10V Pulse Width ≤ 1 μs Duty Factor ≤ 0.1 % 6 Fig 10a. Switching Time Test Circuit 3 t t t t d(on) r d(off) f V GS 10% 0 25 50 75 100 125 150 175 ° T , Case Temperature ( C) C 90% Fig 9. Maximum Drain Current Vs. V DS Case Temperature Fig 10b. Switching Time Waveforms 10 1 D = 0.50 0.20 0.10 P DM 0.05 0.1 t 1 0.02 SINGLE PULSE 0.01 t (THERMAL RESPONSE) 2 Notes: 1. Duty factor D = t / t 1 2 2. Peak T = P x Z + T J DM thJC C 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t , Rectangular Pulse Duration (sec) 1 Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case -I , Drain Current (A) D Thermal Response (Z ) thJC IRF6215S/L 800 L V I DS D TOP -2.7A -4.7A R D.U.T BO TTO M -6.6A G V DD 600 I A AS DRIVER -20V 0.01Ω t p 400 15V 200 Fig 12a. Unclamped Inductive Test Circuit 0 A 25 50 75 100 125 150 175 I AS Starting T , Junction Tem perature (°C) J Fig 12c. Maximum Avalanche Energy Vs. Drain Current t p V (BR)DSS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50KΩ Q .2μF G 12V .3μF -10V - V Q Q + DS GS GD D.U.T. V GS V G -3mA I I G D Charge Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit E , Single Pulse Avalanche Energy (m J) AS IRF6215S/L Peak Diode Recovery dv/dt Test Circuit + Circuit Layout Considerations D.U.T* • Low Stray Inductance • Ground Plane � • Low Leakage Inductance Current Transformer - + � � - + - � R • dv/dt controlled by R + G G • I controlled by Duty Factor "D" V SD DD - • D.U.T. - Device Under Test V GS * Reverse Polarity of D.U.T for P-Channel Driver Gate Drive P.W. Period D = Period P.W. V =10V [ ] *** GS D.U.T. I Waveform SD Reverse Recovery Body Diode Forward Current Current di/dt D.U.T. V Waveform DS Diode Recovery dv/dt V DD [ ] Re-Applied Voltage Body Diode Forward Drop Inductor Curent I [ ] SD Ripple ≤ 5% *** V = 5.0V for Logic Level and 3V Drive Devices GS Fig 14. For P-Channel HEXFETS IRF6215S/L 2 D Pak Package Outline 10.54 (.415) 10.16 (.400) - B - 4.69 (.185) 10.29 (.405) REF. 4.20 (.165) 1.40 (.055) - A - 1.32 (.052) M AX. 1.22 (.048) 2 6.47 (.255) 6.18 (.243) 1.78 (.070) 15.49 (.610) 2.79 (.110) 1.27 (.050) 14.73 (.580) 2.29 (.090) 1 3 2.61 (.103) 5.28 (.208) 2.32 (.091) 4.78 (.188) 8.89 (.350) 1.40 (.055) 1.39 (.055) REF. 3X 1.14 (.045) 0.55 (.022) 1.14 (.045) 0.93 (.037) 3X 0.46 (.018) 0.69 (.027) 5.08 (.200) 0.25 (.010) M B A M M INIMUM RECOM MENDED F OOTPRINT 11.43 (.450) 8.89 (.350) NOTES: LEAD ASSIGNMENTS 1 - GATE 1 DIM ENSIONS AFTER SOLDER DIP. 2 - DRAIN 17.78 (.700) 2 DIM ENSIONING & TOLERANCING PER ANSI Y14.5M , 1982. 3 - SOURCE 3 CONTROLLING DIM ENSION : INCH. 4 HEATSINK & LEAD DIM ENSIONS DO NOT INCLUDE BURRS. 3.81 (.150) 2.54 (.100) 2.08 (.082) 2X 2X Part Marking Information 2 D Pak A INTERNATIONAL PART NUM BER RECTIFIER F530S LOGO 9246 DATE CODE 9B 1M (Y YW W ) ASSEM BLY YY = YEAR LOT CODE WW = WEEK IRF6215S/L Package Outline TO-262 Outline Part Marking Information TO-262 IRF6215S/L Tape & Reel Information 2 D Pak TRR 1.60 (.063 ) 1.50 (.059 ) 1.60 (.06 3) 4.10 (.16 1) 1.50 (.05 9) 0.3 68 (.0145) 3.90 (.15 3) 0.3 42 (.0135) FEED DIRECTION 11.60 (.457) 1.85 (.07 3) 11.40 (.449) 1.65 (.06 5) 24.30 (.957) 15.42 (.609) 23.90 (.941) 15.22 (.601) TR L 1.75 (.069) 10.90 (.42 9) 1.25 (.049) 4.72 (.136) 10.70 (.42 1) 4.52 (.178) 16.10 (.634) 15.90 (.626) FEED DIRECTION 13.50 (.532) 27.40 (1.079) 12.80 (.504) 23.90 (.941) 4 330.00 60.00 (2.362) (14.173) MIN . MA X. 30.40 (1.197) NO TES : MAX. 1. COMFORMS TO EIA-418. 26.40 (1.039) 4 2. CO NTRO LLING DIM ENSIO N: M ILLIM ET ER . 24.40 (.961) 3. DIMENSION MEASUR ED @ HU B. 3 4. INC LUD ES FLAN GE D ISTOR TION @ OUTER EDGE. WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 2Z8, Tel: (905) 475 1897 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: 65 221 8371 http://www.irf.com/ Data and specifications subject to change without notice. 5/98
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the IRF6215L-103 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers




What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods