Elite.Parts Manufacturers I INTERNATIONAL RECTIFIER IRF1104L
About product Datasheet FAQ

INTERNATIONAL RECTIFIER IRF1104L

Description

MOSFET 40V 100A 0.009RDS TO-262

Part Number

IRF1104L

Price

Request Quote

Manufacturer

INTERNATIONAL RECTIFIER

Lead Time

Request Quote

Category

PRODUCTS - I

Datasheet

pdf file

4154348_1.pdf

208 KiB

Extracted Text

PD -91845 IRF1104S/L ® HEXFET Power MOSFET l Advanced Process Technology D l Ultra Low On-Resistance V = 40V DSS l Surface Mount (IRF1104S) l Low-profile through-hole (IRF1104L) R = 0.009Ω DS(on) l 175°C Operating Temperature G l Fast Switching I = 100A� D l Fully Avalanche Rated S Description Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. 2 The D Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible on-resistance 2 D Pak TO-262 2 in any existing surface mount package. The D Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRF1104L) is available for low- profile applications. Absolute Maximum Ratings Parameter Max. Units I @ T = 25°C Continuous Drain Current, V @ 10V� 100� D C GS I @ T = 100°C Continuous Drain Current, V @ 10V� 71� A D C GS I Pulsed Drain Current �� 400 DM P @T = 25°C Power Dissipation 2.4 W D A P @T = 25°C Power Dissipation 170 W D C Linear Derating Factor 1.1 W/°C V Gate-to-Source Voltage ±20 V GS E Single Pulse Avalanche Energy�� 350 mJ AS I Avalanche Current� 60 A AR E Repetitive Avalanche Energy� 17 mJ AR dv/dt Peak Diode Recovery dv/dt �� 5.0 V/ns T Operating Junction and -55 to + 175 J T Storage Temperature Range STG °C Soldering Temperature, for 10 seconds 300 (1.6mm from case ) Thermal Resistance Parameter Typ. Max. Units R Junction-to-Case ––– 0.9 θJC °C/W R Junction-to-Ambient(PCB Mounted,steady-state)** ––– 62 θJA www.irf.com 1 11/20/98 IRF1104S/L Electrical Characteristics @ T = 25°C (unless otherwise specified) J Parameter Min. Typ. Max. Units Conditions V Drain-to-Source Breakdown Voltage 40 ––– ––– V V = 0V, I = 250μA (BR)DSS GS D ΔV /ΔT Breakdown Voltage Temp. Coefficient ––– 0.038 ––– V/°C Reference to 25°C, I = 1mA� (BR)DSS J D R Static Drain-to-Source On-Resistance ––– ––– 0.009 Ω V = 10V, I = 60A � DS(on) GS D V Gate Threshold Voltage 2.0 ––– 4.0 V V = V , I = 250μA GS(th) DS GS D g Forward Transconductance 37 ––– ––– S V = 30V, I = 60A� fs DS D ––– ––– 25 V = 40V, V = 0V DS GS I Drain-to-Source Leakage Current μA DSS ––– ––– 250 V = 32V, V = 0V, T = 150°C DS GS J Gate-to-Source Forward Leakage ––– ––– 100 V = 20V GS I nA GSS Gate-to-Source Reverse Leakage ––– ––– -100 V = -20V GS Q Total Gate Charge ––– ––– 93 I = 60A g D Q Gate-to-Source Charge ––– ––– 29 nC V = 32V gs DS Q Gate-to-Drain ("Miller") Charge ––– ––– 30 V = 10V, See Fig. 6 and 13 �� gd GS t Turn-On Delay Time ––– 15 ––– V = 20V d(on) DD t Rise Time ––– 114 ––– I = 60A r D ns t Turn-Off Delay Time ––– 28 ––– R = 3.6Ω d(off) G t Fall Time ––– 19 ––– R = 0.33Ω, See Fig. 10 �� f D Between lead, L Internal Source Inductance ––– ––– nH S 7.5 and center of die contact C Input Capacitance ––– 2900 ––– V = 0V iss GS C Output Capacitance ––– 1100 ––– pF V = 25V oss DS C Reverse Transfer Capacitance ––– 250 ––– ƒ = 1.0MHz, See Fig. 5� rss Source-Drain Ratings and Characteristics Parameter Min. Typ. Max. Units Conditions D I Continuous Source Current MOSFET symbol S ––– ––– 100� (Body Diode) showing the A G I Pulsed Source Current integral reverse SM ––– ––– 400 (Body Diode) � p-n junction diode. S V Diode Forward Voltage ––– ––– 1.3 V T = 25°C, I =60A, V = 0V � SD J S GS t Reverse Recovery Time ––– 74 110 ns T = 25°C, I =60A rr J F Q Reverse Recovery Charge ––– 188 280 nC di/dt = 100A/μs�� rr t Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by L +L ) on S D Notes: � Repetitive rating; pulse width limited by � Pulse width ≤ 300μs; duty cycle ≤ 2%. max. junction temperature. ( See fig. 11 ) � Uses IRF1104 data and test conditions. � Starting T = 25°C, L = 194μH J R = 25Ω, I = 60A. (See Figure 12) G AS � Calculated continuous current based on maximum allowable junction temperature;for recommended current-handling of the � I ≤ 60A, di/dt ≤ 304A/μs, V ≤ V , SD DD (BR)DSS package refer to Design Tip # 93-4 T ≤ 175°C J ** When mounted on 1" square PCB ( FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. 2 www.irf.com IRF1104S/L 1000 1000 VGS VGS TOP 15V TOP 15V 10V 10V 8.0V 8.0V 7.0V 7.0V 6.0V 6.0V 5.5V 5.5V 5.0V 5.0V BOTTOM 4.5V BOTTOM 4.5V 100 100 4.5V 10 10 4.5V 20μs PULSE WIDTH 20μs PULSE WIDTH ° T = 25 C ° J T = 175 C J 1 1 0.1 1 10 100 0.1 1 10 100 V , Drain-to-Source Voltage (V) V , Drain-to-Source Voltage (V) DS DS Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1000 2.5 I = 100A D 2.0 ° T = 175 C J 100 1.5 10 ° T = 25 C 1.0 J 1 0.5 V = 50V DS V = 10V 20μs PULSE WIDTH GS 0.1 0.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 ° V , Gate-to-Source Voltage (V) T , Junction Temperature( C) GS J Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 I , Drain-to-Source Current (A) I , Drain-to-Source Current (A) D D R , Drain-to-Source On Resistance DS(on) I , Drain-to-Source Current (A) (Normalized) D IRF1104S/L 5000 20 V = 0V, f = 1MHz I = 60A GS D V = 32V C = C + C C SHORTED iss gs gd , ds DS V = 20V C = C rss gd DS C = C + C 4000 oss ds gd 15 C 3000 iss 10 2000 C oss 5 1000 FOR TEST CIRCUIT C rss SEE FIGURE 13 0 0 1 10 100 0 25 50 75 100 V , Drain-to-Source Voltage (V) Q , Total Gate Charge (nC) DS G Fig 6. Typical Gate Charge Vs. Fig 5. Typical Capacitance Vs. Gate-to-Source Voltage Drain-to-Source Voltage 1000 10000 OPERATION IN THIS AREA LIMITED BY R DS(on) 100 1000 T = 175 C ° J 10us 10 100 100us 1ms ° T = 25 C J 10 1 10ms ° T = 25 C C ° T = 175 C J V = 0 V Single Pulse GS 0.1 1 0.2 0.8 1.4 2.0 2.6 1 10 100 V ,Source-to-Drain Voltage (V) V , Drain-to-Source Voltage (V) SD DS Fig 7. Typical Source-Drain Diode Fig 8. Maximum Safe Operating Area Forward Voltage 4 www.irf.com I , Reverse Drain Current (A) SD C, Capacitance (pF) I , Drain Current (A) I , Drain Current (A) V , Gate-to-Source Voltage (V) D GS IRF1104S/L R 100 D V DS LIMITED BY PACKAGE V GS D.U.T. 80 R G + V - DD 60 10V Pulse Width ≤ 1 μs Duty Factor ≤ 0.1 % 40 Fig 10a. Switching Time Test Circuit 20 V DS 90% 0 25 50 75 100 125 150 175 ° T , Case Temperature ( C) C 10% V GS t t t t Fig 9. Maximum Drain Current Vs. d(on) r d(off) f Case Temperature Fig 10b. Switching Time Waveforms 1 D = 0.50 0.20 0.10 0.1 0.05 P DM t 0.02 SINGLE PULSE 1 (THERMAL RESPONSE) 0.01 t 2 Notes: 1. Duty factor D = t / t 1 2 2. Peak T = P x Z + T J DM thJC C 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t , Rectangular Pulse Duration (sec) 1 Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 I , Drain Current (A) D Thermal Response (Z ) thJC IRF1104S/L 800 I D TOP 24A 42A 15V BOTTOM 60A 600 DRIVER L V DS 400 D.U.T R + G V DD - I A AS 20V t 0.01Ω p 200 Fig 12a. Unclamped Inductive Test Circuit 0 25 50 75 100 125 150 175 ° V Starting T , Junction Temperature( C) (BR)DSS J t p Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Current Regulator Fig 12b. Unclamped Inductive Waveforms Same Type as D.U.T. 50KΩ .2μF 12V Q .3μF G + 10 V V DS D.U.T. - Q Q GS GD V GS V G 3mA I I G D Charge Current Sampling Resistors Fig 13b. Gate Charge Test Circuit Fig 13a. Basic Gate Charge Waveform 6 www.irf.com E , Single Pulse Avalanche Energy (mJ) AS IRF1104S/L Peak Diode Recovery dv/dt Test Circuit + Circuit Layout Considerations D.U.T • Low Stray Inductance • Ground Plane � • Low Leakage Inductance Current Transformer - + � � - + - � R G • dv/dt controlled by R + G • Driver same type as D.U.T. V DD - • I controlled by Duty Factor "D" SD • D.U.T. - Device Under Test Driver Gate Drive P.W. Period D = Period P.W. V =10V * GS D.U.T. I Waveform SD Reverse Recovery Body Diode Forward Current Current di/dt D.U.T. V Waveform DS Diode Recovery dv/dt V DD Re-Applied Voltage Body Diode Forward Drop Inductor Curent I Ripple ≤ 5% SD * V = 5V for Logic Level Devices GS Fig 14. For N-Channel HEXFETS www.irf.com 7 IRF1104S/L 2 D Pak Package Details 10.54 (.415) - B - 10.16 (.400) 10.29 (.405) 4.69 (.185) REF. 4.20 (.165) 1.40 (.055) - A - 1.32 (.052) M AX. 1.22 (.048) 2 6.47 (.255) 6.18 (.243) 1.78 (.070) 15.49 (.610) 2.79 (.110) 1.27 (.050) 14.73 (.580) 2.29 (.090) 1 3 2.61 (.103) 5.28 (.208) 2.32 (.091) 4.78 (.188) 8.89 (.350) 1.40 (.055) 1.39 (.055) REF. 3X 1.14 (.045) 0.55 (.022) 1.14 (.045) 0.93 (.037) 3X 0.46 (.018) 0.69 (.027) 5.08 (.200) 0.25 (.010) M B A M MINIMUM RECOMMEND ED FOOTPRINT 11.43 (.450) LE AD ASSIGNM ENTS 8.89 (.350) NOTES: 1 - GATE 1 DIM ENS IONS AFTER SOLDER DIP. 17.78 (.700) 2 - DRAIN 2 DIM ENS IONIN G & TOLERANCING PER ANSI Y14.5M , 1982. 3 - SOURCE 3 CONTROLLIN G DIMENSION : INCH. 4 HEATSINK & LEAD DIM ENSIONS DO NOT INCLUD E BURRS. 3.81 (.150) 2.54 (.100) 2.08 (.082) 2X 2X Part Marking A INTERNATIO NAL PART NUMBER RECTIFIER F530S LOGO 9246 DATE CODE 9B 1M (YYW W ) ASSEMBLY YY = YEAR LOT CODE WW = WEEK 8 www.irf.com IRF1104S/L TO-262 Package Details Part Marking www.irf.com 9 IRF1104S/L 2 D Pak Tape and Reel TRR 1.60 (.063) 1.50 (.059) 1.60 (.063) 4.10 (.16 1) 1.50 (.059) 0.368 (.0145) 3.90 (.15 3) 0.342 (.0135) FEED DIRECTION 11.60 (.457) 1.85 (.073) 11.40 (.449) 1.65 (.065) 24.30 (.957) 15.42 (.609) 23.90 (.941) 15.22 (.601) TR L 1.75 (.069 ) 10.90 (.429) 1.25 (.049 ) 4.72 (.136) 10.70 (.421) 4.52 (.178) 16.10 (.634) 15.90 (.626) FEED DIRECTION 13.50 (.532) 27.40 (1.079) 12.80 (.504) 23.90 (.941) 4 330.00 60.00 (2.362) (14.173) M IN . MAX. 30.40 (1.197) NO TES : M AX. 1. C O M FO RM S TO EIA-418. 26.40 (1.039) 4 2. CO NTRO LLIN G DIM ENSIO N: M ILLIM ETER . 24.40 (.961) 3. D IM ENSIO N M EASUR ED @ HU B. 3 4. IN CLU D ES FLAN GE D ISTOR TION @ OU TER ED GE. WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 IR GREAT BRITAIN: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 838 4630 IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan Tel: 886-2-2377-9936 http://www.irf.com/ Data and specifications subject to change without notice. 11/98 10 www.irf.com

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the IRF1104L have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

The IRAC1150-D2 Control Board is designed to demonstrate the performance of the RoHS Compliant: NA

product

60V SINGLE N-CHANNEL HEXFET POWER MOSFET IN A D2-PAK PACKAGE

product

55V SINGLE N-CHANNEL HEXFET POWER MOSFET IN A TO-220AB PACKAGE

product

55V SINGLE N-CHANNEL HEXFET POWER MOSFET IN A D2-PAK PACKAGE

product

55V SINGLE N-CHANNEL HEXFET POWER MOSFET IN A TO-220AB PACKAG

product

MOSFET, N TO-220 40V 100A RoHS Compliant: Yes