100-130 WATT MEDICAL SWITCHING POWER SUPPLIES PROTEK PMP130 SERIES DESCRIPTION (LVD) RoHS The PMP130 series of AC/DC switching power supplies are for 100 to 130 watts of continuous output power, specially designed for medical applications, not for life support equipment. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. An on/off switch can be added at request. All models meet CISPR 11 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements. FEATURES ‧ In compliance with EN61000-3-2, EN61000-3-3 and EN61000-1-1-2 ‧ Optional output connectors ‧ Optional on/off switch ‧ Optional Power Fail Detect (PFD) signal Safety Standard Approvals： ‧ 100% burn-in at full load ‧ Auto-ranging input ‧ Overvoltage protection UL 2601-1,CSA C22.2 NO. 601.1 ‧ Overcurrent protection File NO. E178020 ‧ Thermal protection ‧ Compliant with RoHS requirements TÜV EN60601-1 Certificate No. T9955423 INPUT SPECIFICATIONS Input voltage： 90 to 132VAC or 180 to 264VAC (auto-ranging) Input frequency： 47 to 63Hz Input current： 3.0A (rms) for 115 VAC 1.7A (rms) for 230VAC GENERAL SPECIFICATIONS Earth leakage current： 90uA max. @ 115VAC, 60Hz 150uA max. @ 230VAC, 50Hz Switching frequency： 68 KHz ±8KHz Efficiency： 70% minimum on Vo ≧ 12V 65% minimum on the others Hold-up time： 10 msec minimum at 115VAC OUTPUT SPECIFICATIONS ±0.5% maximum at full load Line regulation： Inrush current： 15amps @115VAC, or 30amps Output voltage/current： See rating chart @230VAC at 25℃ and cold start Total output power： 130 watts maximum 4000VAC from input to output Withstand voltage： Ripple and noise： 1﹪peak to peak maximum 1500VAC from input to ground Provided on output: set at Overvoltage protection： 500VAC from output to ground 112 -132﹪of its nominal MTBF： 400,000 hours minimum at full load output voltage at 25℃ ambient, calculated per All outputs protected to short Overcurrent protection： MIL-HDBK-217F, excluding DC fan. circuit conditions EMC Performance (EN60601-1-2: 2001) All outputs ±0.04﹪/ ℃ Temperature coefficient： EN55011: Class B conducted, Class B radiated maximum FCC: Class B conducted, Class B radiated Transient response： Maximum excursion of 4﹪or VCCI: Class B conducted, Class B radiated better on all models, EN61000-3-2: Harmonic distortion, Class A recovering to 1﹪of final value within 500us after a EN61000-3-3: Line flicker 25﹪ step load change EN61000-4-2: ESD, ± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity, 3V/m for 80~2500MHz EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. ENVIRONMENTAL SPECIFICATIONS EN61000-4-6: Conducted immunity, 3Vrms Operatingtemperature: 0t℃℃ o +70 Storage temperature： EN61000-4-8: -40℃℃ to +85 Magnetic field immunity, 3A/m Relative humidity： 5﹪ to 95﹪ non-condensing EN61000-4-11: Voltage dips, 30% reduction for Derating： Derate from 100﹪ at +50℃ 500ms, 60% reduction for 100ms linearly to 50﹪ at +70℃ and >95% reduction for 10ms 4-1 1 AUTORANGING INPUT PMP130 MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART (1) (2) Output Maximum MODEL Vnom. Imin. Imax. Tol. Output Power PMP130-10 5V 0A 20A 5% 100W PMP130-10-1 7V 0A 14.3A 5% 100W PMP130-11 10V 0A 10A 5% 100W PMP130-12 12V 0A 11A 5% 130W PMP130-13 15V 0A 8.7A 4% 130W PMP130-13-1 18V 0A 7.25A 4% 130W PMP130-14 24V 0A 5.5A 3% 130W PMP130-16 30V 0A 4.4A 3% 130W PMP130-17 36V 0A 3.52A 2% 130W PMP130-18 48V 0A 2.75A 2% 130W NOTES: 1. All models are with built-in fan. 2. Models except PMP130-10, PMP130-10-1 and PMP130-11 are without remote sense. Consult factory for applications requiring remote sense. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 0.80 kgs. (1.76 lbs.) approx. 4. See pages 6-19 to 6-26 for optional output connectors. Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP130-14-HA, for ordering. 5. To order a model with on/off switch, add suffix “S” to the model number, e.g. PMP130-14-HA-S. PIN CHART PIN 1 2 3 4 5 6 7 8 MODEL PMP130-10 PMP130-10-1 OUTPUT OUTPUT OUTPUT RETURN -SENSE RETURN RETURN +SENSE PMP130-11 +V +V +V PMP130-12 PMP130-13 PMP130-13-1 PMP130-14 OUTPUT OUTPUT OUTPUT OUTPUT RETURN RETURN RETURN RETURN PMP130-16 PMP130-17 +V +V +V +V PMP130-18 4-14