C8800 Series Electromechanical Time Switches C8800 Series Short Range Cycle Timers The C8800 Series Short Range Cycle Timers repeat cycling for applications that require ON times as short as 5 seconds, such as ventilating fans, fogging equipment, process equipment, poultry and livestock feeders, and spraying equipment. Features • 10 combination ON/OFF trippers supplied with each switch • Complete dial cycle every 10 minutes, 30 minutes, 1 hour, or 4 hours • Tripper actuating times of 5, 15, 30, or 120 second duration • Dials have 120 slots Ratings Enclosure: Type 1 indoor 7 ¾" (19.7 cm) H x 5" (12.7 cm) W x 3" (7.62 cm) D in gray finish 1 3 Knockouts: Combination ⁄2"- ⁄4" nominal knockouts, one on back and on each side, and two on bottom Switch Type: Single Pole Double Throw Switch Rating: 20 Amp Resistive, 125, 208-277 VAC ½ HP, 125 VAC C8845 1 HP, 250 VAC Power Input: 3 Watts Maximum Operating Temperature: -40°F to 130°F (-40°C to 54°C) Shipping Weight: 3 lbs. (1.4 kg) Warranty: 1 year C8865 Model in Type 1 Enclosure Clock Motor VAC 60 Hz Dial Cycle Tripper Actuating Time C8815 125 10 Minutes 5 Seconds C8835 125 30 Minutes 15 Seconds C8865 125 1 Hour 30 Seconds C8845 125 4 Hours 120 Seconds C8866 208-277 1 Hour 30 Seconds Energy Controls C8800 Series Specification The time switch shall be of the repeat cycle type, capable of permitting short duration cycling. The cycle timer dial shall complete one revolution every ________________ (10 Minutes)(30 Minutes)(1 Hour)(4 Hours) and shall provide tripper actuating time of ____________ (5 Seconds)(15 Seconds)(30 Seconds)(120 Seconds). The time switch to be powered by ____________ (125)(250) VAC, 60 Hz power supply. The time switch motor shall be a synchronous motor, which shall be designed to withstand a minimum of 6000 Volt transients. The time switch motor shall be connected to the supply terminals with ring-type connectors and shall not require more than 3 Watts to operate the time switch. The time switch mechanism shall be a snap-in design to aid mechanism removal from the enclosure. The time switch enclosure shall be a Type 1 lockable steel enclosure, which shall be painted with an electrostatic painting process to eliminate the potential for corrosion. The time switch enclosure shall provide a minimum of 31 cubic inches of wiring space and shall provide a non-removable cover, which shall open a full 180 degrees. The time switch shall provide a non-curling terminal insulator. Switch configuration shall be SPDT with a listed switch rating of: • 20 Amp Resistive, 125 and 208-277 VAC • ½ HP, 125 VAC • 1 HP, 250 VAC The time switch shall be agency listed under Clock Operated Switches and shall be Intermatic model _____________ (See Models Numbers Listed). Diagrams C8800 Series SPDT Clock Motor NO NC COM CLOCK 7 ¾" [19.69 cm] Line 1 125 VAC Input Neutral NC Load NO Load 3" Clock [7.62 cm] Motor 5" [12.70 cm] NO NC COM CLOCK Line 1 250 VAC Input Line 2 NC Load NO Load Energy Controls www.intermatic.com