9825FN03.qxd 5/3/06 4:47 PM Page 1 Product Brief Intel NetStructure® MPCBL0040 Telecom and Compute Boards Single Board Computer The Intel NetStructure® MPCBL0040 single board computer is the latest in a series of high compute boards introducing powerful multi-core architecture compliant with the Advanced Telecom Computing Architecture (AdvancedTCA*) specification. The MCPBL0040 features two Dual-Core Intel® Xeon® LV 2.0 GHz processors, providing a total of four processor cores per board. This design achieves significant performance improvements in multithreaded applications such as IP Multimedia Subsystem (IMS), IPTV, and • FSB address, data parity, ECC memory, and an Wireless Control Plane applications. enhanced error reporting mechanism through The MPCBL0040 is also designed to interoperate Machine Check Architecture (MCA) that ensures with AdvancedTCA products from Intel and with reliability and data integrity third-party building blocks meeting the PICMG* 3.0 specification. AdvancedMC The MPCBL0040 has one AdvancedMC* site, Dual-Core Intel® Xeon® LV 2.0 GHz which supports the next-generation mezzanine Processor card standard optimized for AdvancedTCA. The processor subsystem on the MPCBL0040 AdvancedMC uses PCI Express* and Gigabit offers: Ethernet for maximum throughput. In addition, • Dual processor support, which includes an the increased board area and power envelope enhanced bus arbitration protocol, power- enables the MPCBL0040 to support high-density optimized 667 MHz front-side bus (FSB), and a I/O and processor mezzanines. 2 MB shared L2 cache per physical processor AdvancedMC provides full hot swap support and enabling four high-performance cores allows management via an onboard IPMB bus. per platform AdvancedMC cards can also reduce time-to- • 36-bit memory addressing using Physical market because AdvancedMC provides baseboard Address Extension (PAE) that provides support modularity via an easy-to-use expansion slot that for up to 8 GB of memory on the MPCBL0040 requires no infrastructure changes. Backplane Fabric Interface Magnetics Base Interface Serial USB PCI Ex (x4) PCI Ex (x4) PCI Ex (x4) Mux 2x LPC PATA 2xGbE 9825FN03.qxd 5/3/06 4:47 PM Page 2 Product Brief Intel NetStructure® MPCBL0040 Single Board Computer Features Benefits Processor: Two Dual-Core Intel® Xeon® LV 2.0 GHz Performance boost from processor technology enables superior processors featuring multi-core technology subsystem scalability and greater density (more subscribers/transactions per board) to allow more network elements in an AdvancedTCA chassis, which improves system scalability Chipset: Intel® E7520 provides direct connection Supports outstanding I/O throughput by delivering higher bandwidth between the MCH and PCI Express components and with PCI Express for improved platform performance AdvancedMC modules Interface: Dual Star Gigabit Ethernet base and fabric Backplane supports high I/O requirements and access to high-speed interfaces (compliant with PICMG 3.0 and 3.1, option 2) storage systems Mezzanine Site: One AdvancedMC Allows module hot add and hot swap, higher throughput bandwidth than PMCs, and easy expandability Management: Intelligent Platform Management Enables carrier-grade system reliability and manageability such as Controller (IPMC) controlling board power and monitoring onboard sensors using dual Intelligent Platform Management Bus (IPMB) connections High Availability Features: Redundant BIOS images, Redundancy on key items enables high reliability for field deployments IPMC firmware images, and dual 128 MB flash drives Option for enterprise-class hard drive, which allows Serial Provides high reliability, low latency data access for boot up and other Attached SCSI (SAS) drives with MTBF over 1 million hours local storage Multiple storage options (local hard drive, front Supporting multiple onboard and external storage options allows SAS ports, redundant 128 MB flash drives, and configuration flexibility Rear Transition Module hard drive) Block Diagram Figure 1. MPCBL0040 Block Diagram 9 Lanes to RTM J30 2x 2x J31 SAS 4xSAS SFF Hard Disk SAS J32 Connector SAS 2xGbE 2xGbE ® ® Controller Intel Intel 2x 2xSAS GbE Port 82571EB 82571EB FI-CH1 FI-CH2 PCI-X GbE Port Redundant Redundant 2xGbE Firmware Hubs 128 MB Flash 2x ® Intel 82571EB BI ® Intel 6300ESB SAS I/O Controller HUB AdvancedMC 266 MB/s (ICH) (B2) Onboard HI 1.5 Power ® Intel E7520 PCI Ex (x4) Supplies and Memory Controller Hub Hot Swap (MCH) 3.2 GB/s Circuitry DDR2-400 J23 3.2 GB/s DDR2-400 Two 667 MHz RJ-45 Serial 240-pin 5.3 GB/s DIMM Port Sockets Redundant — Reset 48V Power Switch DDR2-400 Dual-Core Intel® Dual-Core Intel® Feeds and ECC Xeon® Processor Xeon® Processor Returns SDRAM LV 2.0 GHz LV 2.0 GHz P10 IPMC (667 MHz PSB) (667 MHz PSB) • • • • � • • • � • • • • � • • • � • • • • � • • • � • • • • � USB Port • • • � Redundant IPMB Links • • • • � IPMB Isolators • • • � • • • • � 2 Front Panel 9825FN03.qxd 5/3/06 4:47 PM Page 3 Intel NetStructure® MPCBL0040 Single Board Computer Product Brief Technical Specifications Processor Type Dual-Core Intel® Xeon® LV 2.0 GHz processor Core Dual core using Chip Multi-Processing (CMP) architecture Processor Side Bus 667 MHz Memory Cache Memory 2 MB L2 cache per processor Maximum Memory Capacity 8 GB SDRAM using two 4 GB DDR2-400 Registered ECC SDRAM DIMMs Number of DIMM Slots 2 Chipset Memory Controller Hub Intel® E7520 I/O Controller Hub Intel 6300ESB Operating System Linux Validated with MontaVista Linux Carrier Grade Edition (CGE)* 4.0 Validated with Wind River Platform for Network Equipment, Linux Edition* 1.2 Power Supported Voltage (Normal) -38VDC to -72VDC Maximum Power Draw 190W (with maximum memory installed and 25W for AdvancedMC* slot) Environmental Ambient Temperature Operating (normal): 5°C to 40°C (board intake temperature) Operating (short term): -5°C to 55°C Storage: -40°C to 70°C Airflow Operating: 30 CFM per minute minimum Humidity Operating: 15% to 90% non-condensing at 55°C Storage: 5% to 95% non-condensing at 40°C Vibration Operating: 5 to 100Hz: 1G @ 0.25 octave/minute; 100 to 500Hz: 1G @ 1 octave/minute Shock (unpackaged) Operating: 30 G/11 ms half sine Non-operating: 50 G, 170 inches/second trapezoidal Connections Front Panel I/O One USB 2.0 port One serial port (RJ-45) One x4 SAS connector with support for 2 SAS ports One AdvancedMC single-width, full-height slot (x4 PCI Express, Dual Gb Ethernet) Two 10/100/1000 Ethernet ports LEDs for hot swap, out of service, health, hard drive activity, and Ethernet ports Backplane Dual Gigabit Ethernet (AdvancedTCA Base Interface)) Quad Gigabit Ethernet (AdvancedTCA Fabric Interface; PICMG 3.1, option 2) Dual IPMB connections (Zone 1) Support for Rear Transition Module (Zone 3) Rear Transition Module Ports 4x SAS ports Serial port USB port 3 9825FN03.qxd 5/3/06 4:47 PM Page 4 Product Brief Intel NetStructure® MPCBL0040 Single Board Computer Technical Specifications (cont.) Storage Type Onboard storage controller with RAID 0/1support Support for onboard 2.5-inch Small Form Factor (SFF) Serial Attached SCSI (SAS) hard drive Redundant 128 MB flash drives Front panel SAS connector Support for SFF SAS hard drive on Rear Transition Module Physical Height 8U, 14 in. (35.56 cm) Width 1.2 in. (3.048 cm) Depth 11.02 in. (28 cm) Weight 7 pounds (3.18 kg)— without packaging 8.82 lbs. (4.01 kg) — with packaging Specification Compliance AdvancedTCA AdvancedTCA 3.0 R1.0 and ECN001 AdvancedMC AMC.0, AMC.1, AMC.2 NEBS Demonstrated NEBS Level-3 compliance IPMI IPMI v2.0 Regulatory Compliance Safety UL/cUL 60950-1 Safety for Information Technology Equipment E96804 EN/IEC 60950-1 Safety for Information Technology Equipment (CB Report and Certificate) Emissions CISPR22:1997 & 2003/EN55022:1998 & EN55022 A1:2000 & A2:2003 Class A EN 300 386 V1.3.2:2003 FCC Rules CFR 47:2003 Part 15B Class A ICES-003, Issue 4 (CISPR 22:1997 & A2:2002) Class A Hazardous Substances Content meets requirements of EU RoHS Directive relying on exemptions for lead in solders for network infrastructure equipment for switching, signaling, transmission as well as network management for telecommunications (“Telecom”) and for lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip Chip packages (“Flip Chip”). Products using Telecom exemption ONLY comply with the RoHS Directive if used in exempted applications. Products using Flip Chip exemption may be labeled as Pb-free-Second Level Interconnect. Warranty Intel® Telecom Products Warranty Information at http://www.intel.com/network/csp/products/3144web.htm Single Board Computer Product Line Overview Table Product Processor Core Chipset Mezzanine Slots MPCBL0001 Dual Low Voltage Intel Xeon processors (2.0 GHz) Single Intel E7501 1 PMC MPCBL0010 Low Voltage Intel Xeon processor (2.8 GHz) Single Intel E7520 2 AdvancedMC MPCBL0020 Intel® Pentium® M processor 760 (2.0 GHz) Single Intel E7520 3 PMC MPCBL0030 Dual Low Voltage Intel Xeon processors (2.8 GHz) Single Intel E7520 1 PMC MPCBL0040 Dual Dual-Core Intel Xeon LV 2.0 GHz processors Dual Intel E7520 1 AdvancedMC 4 9825FN03.qxd 5/3/06 4:47 PM Page 5 www.intel.com/go/atcaprod 1515 Route Ten Parsippany, NJ 07054 Phone: 1-973-993-3000 ® INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications, product descriptions, and plans at any time, without notice. Intel NetStructure, Intel Xeon, Intel Pentium, Intel, the Intel logo, Intel. Leap ahead., and Intel. Leap ahead logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Printed in the USA Copyright 2006 Intel Corporation All rights reserved. Printed on recycled paper. 05/06 00-9825-003 e ©