INTEL D848PMB

Product Brief ® Intel Desktop Board D848PMB The solid choice for your 800-MHz FSB, Single-channel DDR400 desktop board needs. www.intel.com ® Intel Desktop Board D848PMB for the ® ® Intel Pentium 4 Processor ® Intel Desktop Board D848PMB 8 FEATURES AND BENEFITS 6 8 5 ® ® 1 Support for the Intel Pentium 4 processor featuring Hyper-Threading Technology and 800-MHz system bus in the mPGA478-pin package. Also ® ® supports the Intel Pentium 4 processor (1.60a, 1.80a, 2a, 2.20 GHz or higher) with 800/533-MHz or 400-MHz system bus in the mPGA478 package. ® ® Intel Celeron processors (2 GHz or higher) in the mPGA478 package. 2 Single-Channel DDR400 SDRAM memory support: Two DIMM sockets designed to support up to 2 GB of DDR400 SDRAM memory (also supports 7 Enables Solid Desktop Performance. DDR333 and DDR266). 3 AGP 8X graphics interface: Support for high-end ® AGP graphics cards. 3 The Intel Desktop Board D848PMB 4 SATA 150 and Ultra ATA100 connectors: Flexible 1 features an 800-MHz FSB, single- support of new-generation SATA150 (2 ports) and current generation ATA (2 channels) storage devices. channel DDR400 memory support, ® 5 Integrated Intel PRO 10/100 LAN (optional): Onboard 10/100-Mbps LAN. AGP 8X graphics interface, and 6 AC’97 Audio: 2-channel digital audio. 9 SATA150 hard drive support. 7 Three PCI slots: Expansion slots for custom system configurations and future add-in card upgrades. 2 8 Eight Hi-Speed USB 2.0 ports: Four rear ports and headers for four front-panel USB ports. ® 9 Intel Precision Cooling Technology: Advanced management ASIC supports temperature-based fan control. Fan speeds adjust real time according to 4 10 4 system temperatures to help reduce unnecessary noise and energy consumption. ® 10 Intel Rapid BIOS Boot: Accelerates Power-On Self Test (POST) for faster system access. ® BOXED INTEL DESKTOP BOARDS D848PMB SOLUTION INCLUDES: 11 Instantly-Available PC (suspend-to-RAM): Enables advanced power savings (not pictured). ® ® PS/2 PARALLEL LAN■■Intel Desktop Board Intel Express Installer CD, including: D848PMB • Norton* Internet Security* 2003 ® ■• Intel Active Monitor ATX compliant I/O shield 5 • NTI CD-Maker* ■IDE cable 6 • RealOne* Player ■Board and back-panel • Diskeeper* Lite I/O layout stickers • InterVideo* WinDVD* Creator Silver 8 8 • InterVideo* WinDVD* Recorder Silver ■Quick Start Guide • RestoreIT!* Lite ■Desktop Board three- • Software Drivers USB SERIAL USB AUDIO year limited warranty • Product Matrix TECHNICAL SPECIFICATIONS ® Intel Desktop Board D848PMB Processor Wake-Up From Network ® ® Processors Supported • Intel Pentium 4 processors supporting Hyper-Threading •Wired for Management (WfM) 2.0-compatible 1 Technology with 800-MHz or 533-MHz system bus in •Support for system wake-up using an add-in network the mPGA478-pin package interface card with remote wake-up capability or •Intel Pentium 4 processors (1.60a, 1.80a, 2a, 2.20 GHz integrated LAN or higher) with 533-MHz or 400-MHz system bus in the mPGA478-pin package Expansion Capabilities ® ® •Intel Celeron processors (2 GHz or higher) with • Three PCI bus add-in card connectors 400-MHz system bus in the mPGA478-pin package • One 1.5/0.8V AGP 3.0 connector supporting ® ® Intel 848P Chipset •Intel 82801EB I/O Controller Hub (ICH5) with up to AGP 8X Accelerated Hub Architecture bus Jumpers and Front-Panel Connectors 3 Memory Controller Designed to support up to 2 GB of system memory 2 4/5 Hub (MCH) using DDR400 /333 /266 SDRAM memory Jumpers •Single configuration jumper design • Jumper access for BIOS configuration mode ® Intel ICH5 I/O •Ultra ATA 100/66 Controller Hub • PCI request-grant pairs for support of three PCI bus Front-Panel Connectors • Reset, HD LED, Power LEDs, power on/off, masters standby header •Two SATA 150 (1.5 Gbps) ports •Two front-panel USB headers ® •Intel PRO 10/100 network connection (optional) •Front-panel audio header I/O Features Integrated super I/O LPC bus controller Mechanical • Three PCI local bus slots •Designed for PC2001 Board Style MicroATX 1.0-compliant ® USB 2.0 Integrated Intel ICH5 controllers: Board Size 9.5" x 8.5" • Four back-panel ports (two dual stack) • Four front-panel ports (via 2-headers requiring cabling Baseboard Power to front panel) Requirements ATX12V or SFX12V Firmware Hub Environment System BIOS •4-Mb Flash EEPROM with Intel/AMI* BIOS featuring Operating Temperature 0° C to +55° C Plug and Play, IDE drive auto-configure • Advanced configuration and power interface V1.0b, Storage Temperature -40° C to +70° C DMI 2.0, multilingual support ® Regulations Intel Rapid BIOS Boot • Optimized POST for faster access to PC from power-on Safety Regulations System Memory U.S. and Canada UL 1950, Third edition—CAN/CSA C22.2 No. 950-95 with recognized U.S. and Canadian component marks Memory Capacity •Two 184-pin DIMM connectors supporting up to two Europe Nemko certified to EN 60950 double-sided DIMMs International Nemko certified to IEC 60950 ® Memory Types • DDR400 SDRAM Memory (when used with Intel (CB report with CB certificate) processor with 800-MHz system bus) 4 EMC regulations (tested in representative chassis) • DDR333 SDRAM Memory (when used with Intel U.S. FCC Part 15, Class B processor with 800-MHz or 533-MHz system bus) U.S. FCC Part 15, Class B open-chassis (cover off) testing • DDR266 SDRAM Memory Canada ICES-003, Class B • Non-ECC RAM (ECC memory will run in non-ECC mode) Europe EMC directive 89/336/EEC; EN 55022:1998 Class B; Memory Modes •Single-channel operation support EN 55024:1998 Australia/New Zealand AS/NZS 3548, Class B Memory Voltage • 2.5V Taiwan CNS 13438, Class B International CISPR 22:1997, Class B Hardware Management Features Power requirements vary. Complies with US CRF via EN55022 +6 db in system •System chassis fan speed control configurations with an open chassis and EU Directive 89/336/EEC and use via EN55022 •Voltage and temperature sensing and EN50082-1 in a representative chassis. • Fan sensor inputs used to monitor fan activity • Power management support for ACPI 1.0b ORDERING INFORMATION See Intel’s Web site at www.intel.com For the most current product information available, visit Intel’s Web site at: developer.intel.com/design/motherbd/ ® INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. All products, dates and figures specified are preliminary based on current expectations, provided for planning purposes only, and are subject to change without notice. Availability in different channels may vary. ® The Intel Desktop Board D848PMB may contain design defects or errors known as errata, which may cause the product to deviate from published specifications. Current characterized errata are available on request. Intel, Pentium, Celeron, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. 1 ® ® Hyper-Threading requires a computer system with an Intel Pentium 4 processor supporting this technology, a chipset and BIOS that utilize this technology, and an operating system that includes optimizations for this technology. Performance will vary depending on the specific hardware and software you use. See www.intel.com/info/hyperthreading for information. 2 ® ® DDR400 memory only supported in combination with Intel Pentium 4 processor with 800-MHz system bus. 3 Desktop Board D848PMB was designed to support up to 2 GB total system memory using DIMMs based on 512-Mbit technology. For more information about the latest list of tested memory, refer to the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop/ 4 When using an 800-MHz FSB CPU, DDR333 memory is clocked at 320 MHz. This minimizes system latencies to optimize system performance. 5 ® ® DDR333 memory not supported in combination with Intel Pentium 4 processor with 400-MHz system bus. Copyright © 2003 Intel Corporation. All rights reserved. 253912-001