SRW-300-4001 - INTEGRATED POWER DESIGNS

Image of INTEGRATED POWER DESIGNS SRW-300-4001

Description

Integrated Power Designs SRW-300-4001 INTEGRATED POWER DESIGNS SRW-300-4001 Power Supply - 300W Power Supply, One to Five Tightly Regulated Outputs

Part Number

SRW-300-4001

Price

Request Quote

Manufacturer

INTEGRATED POWER DESIGNS

Lead Time

Request Quote

Category

PRODUCTS - S

Specifications

Ambient Operating

0° C to + 50° C

Ambient Storage Temp. Range

- 40° C to + 85° C

Basic Insulation

2121 VDC, Primary to Ground, 1 Sec.

Cross Regulation

Outputs 2 – 5: 0.5% (Output 1 load varied 50-100%)

Dielectric Strength

(9)

Efficiency

.68-.80(Varies by model)

Frequency Range

47 – 63 Hz

Harmonic Distortion

0.05

Hold Up Time

20 mS min., 300W Output, 120V Input

Load Change

50% to 100%

Load Regulation

Outputs 1 – 5: 1.0% (10-100% load change)

Operational Insulation

500 VDC, Secondary to Ground, 1 Sec.

Output Noise

Outputs 1 - 5: 1.0%

Output Overcurrent Protection

Outputs 2,3,4 & 5, 110% Min

Output Overpower Protection

340 W Min., Outputs cycle on/off, auto recovery

Output Overvoltage Protection (Optional)

Output 1: 120% to 150% Shuts down all outputs. Cycle input to restart.

Output Voltage Adjust Range

Outputs 1 – 3: 95 - 105%

Output Voltage Centering

Outputs 1 – 5: ± 0.5% (All outputs at 50% load)

Peak Inrush

20A

Peak Repetitve

8.2A at 85V Input

Power Factor

0.90 (300 W, 230V)

Power Fail Signal

Logic low with input power failure 2 mS minimum prior to Output 1 dropping 1%

Recovery Time

2mS

Reinforced Insulation

4242 VDC, Primary to Secondary, 1 Sec.

Remote On/Off (optional)

Contact closure shuts off all outputs

Remote Sense(outputs 1 & 2)

250mV compensation of output cable losses

Source Regulation

Outputs 1 – 5: 0.5%

Source Voltage

85 – 264 Volts AC

Start Up Time

3 Seconds

Temperature Coefficient

Outputs 1 – 5: 0.02%/°C

Temperature Range

Derating: See Power Rating Chart

Total Output Power

300W

Transient Response

Outputs 1 – 5

True RMS

5.8A at 85V Input

Turn on Overshoot

None

Voltage Deviation

5.0%

Weight

3.30 Lbs.

Features

2 Year Warranty
Class B Emissions per EN 55022
Compact 4.9" x 8.5" x 1.95 Size
EMC to EN 61000-6-2 and EN 60601-1-2
EN 60950-1 ITE Certification
Harmonic Current per EN 61000-3-2
One to Five Tightly Regulated Outputs
RoHS Compliant
Universal 85-264 VAC Input

Datasheet

Integrated Power Designs=SRW-300-4001=datasheet1-743071536.pdf

93 KiB

Download

Extracted Text

300 WATTS CE-300 SERIES AC-DC OUTPUT SPECIFICATIONS Total Output Power 300W FEATURES: Output Voltage Centering Outputs 1 – 5: (All outputs ± 0.5% • RoHS Compliant • EN 60950-1 ITE Certification at 50% load) • Universal 85-264 VAC Input • Class B Emissions per EN 55022 Output Voltage Adjust Range Outputs 1 – 3: 95 - 105% • Compact 4.9" x 8.5" x 1.95 Size • Harmonic Current per EN 61000-3-2 Load Regulation Outputs 1 – 5: 1.0% (10-100% load change) • 2 Year Warranty • EMC to EN 61000-6-2 and Source Regulation Outputs 1 – 5: 0.5% • One to Five Tightly Regulated EN 60601-1-2 Cross Regulation Outputs 2 – 5: 0.5% (Output 1 load Outputs varied 50-100%) Output Noise Outputs 1 - 5: 1.0% Turn on Overshoot None Transient Response Outputs 1 – 5 Voltage Deviation 5.0% Recovery Time 2mS Load Change 50% to 100% Output Overvoltage Protection Output 1: 120% to 150% Shuts down all (Optional) outputs. Cycle input to restart. FAN/COVER Output Overpower Protection 340 W Min., Outputs cycle on/off, auto recovery SAFETY SPECIFICATIONS Output Overcurrent Protection Outputs 2,3,4 & 5, 110% Min Protection Class: I Hold Up Time 20 mS min., 300W Output, 120V Input General Overvoltage Category: II Start Up Time 3 Seconds Pollution Degree: 2 INPUT SPECIFICATIONS nd Source Voltage 85 – 264 Volts AC Underwriters UL 60950-1 2 Edition Frequency Range 47 – 63 Hz Laboratories Source Current File E137708/E140259 True RMS 5.8A at 85V Input CB Certificate per IEC 60950-1:2005 nd Peak Inrush 20A 2 Edition +A1:2009 including all Peak Repetitve 8.2A at 85V Input National Deviations Harmonic Distortion 0.05 UL Recognition CAN/CSA-C22.2 No. 60950-1-07, Efficiency .68-.80(Varies by model) nd Mark for Canada 2 Edition Power Factor 0.90 (300 W, 230V) File E137708/E140259 ENVIRONMENTAL SPECIFICATIONS EN 60950-1/A1:2010 Ambient Operating 0° C to + 50° C TUV Temperature Range Derating: See Power Rating Chart Ambient Storage Temp. Range - 40° C to + 85° C Low Voltage Directive Temperature Coefficient Outputs 1 – 5: 0.02%/°C GENERAL SPECIFICATIONS Dielectric Strength(9) MODEL LISTING Reinforced Insulation 4242 VDC, Primary to Secondary, 1 Sec. MODEL NO. OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 Basic Insulation 2121 VDC, Primary to Ground, 1 Sec. CE-300-5001 +5V/40A +24V/4A +12V/6A -5V/1A -12V/2A Operational Insulation 500 VDC, Secondary to Ground, 1 Sec. CE-300-5002 +5V/40A +12V/8A -12V/6A -5V/1A +24V/2A Power Fail Signal Logic low with input power failure 2 mS CE-300-5003 +5V/40A +12V/8A +24V/3A -15V/1A +15V/2A minimum prior to Output 1 dropping 1% CE-300-5004 +5V/40A +24V/4A 24V/3A -12V/1A +12V/2A CE-300-5005 +24V/8A +12V/8A +5V/6A -15V/1A +15V/2A Remote On/Off (optional) Contact closure shuts off all outputs CE-300-5006 +24V/8A 24V/4A +5V/6A -15V/1A +15V/2A Remote Sense(outputs 1 & 2) 250mV compensation of output cable losses CE-300-5012 +5V/40A +28V/3A +12V/6A -5V/2A -12V/2A Weight 3.30 Lbs. CE-300-5013 +5V/40A +3.3V/6A +24V/4A -5V/1A 12V/2A ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS CE-300-4001 +5V/40A +12V/8A -5V/5A -12V/2A Electrostatic Discharge EN 61000-4-2 +/- 8kV Contact Discharge CE-300-4002 +5V/40A +24V/4A +12V/6A -12V/2A +/- 8kV Air Discharge CE-300-4003 +5V/40A +24V/4A +15V/4A -15V/2A Radiated Electromagnetic Field EN 61000-4-3 80MHz-2.5GHz, 10/m, 80% AM CE-300-4004 +24V/8A +12V/8A +5V/6A -12V/2A EFT/Bursts EN 61000-4-4 +/- 2 kV CE-300-4005 +5V/40A -5.2V/12A +12V/6A -12V/2A Surges EN 61000-4-5 +/- 1 kV Differential Mode CE-300-4006 +24V/8A +12V/8A -12V/1.5A 5V/2A CE-300-4007 +24V/8A +15V/6A +5V/6A -15V/2A +/- 2 kV Common Mode CE-300-4009 +24V/8A +12V/8A +5V/10A -12V/2A Conducted Immunity EN 61000-4-6 .15 to 80MHz, 3V, 80% AM CE-300-4011 +5V/40A +3.3/12A +12V/2A -12V/2A Voltage Dips and Interruptions EN 61000-4-11 30% Reduction, 500ms CE-300-3001 +5V/40A +12V/8A -12V/6A 95% Reduction, 10ms CE-300-3002 +5V/40A +12V/8A +24V/3A 60% Reduction, 1s (Criteria B) CE-300-3003 +5V/40A +15V/6A -15V/4A 95% Reductions, 5000ms CE-300-3004 +12V/16A +12V/8A +5V/6A Radiated Emissions EN 55022 Class B CE-300-3006 +5V/40A +3.3/12A +12V/2A Conducted Emissions EN 55022 Class B CE-300-2001 +5V/40A +24V/4A Harmonic Current Emissions EN 61000-3-2 CE-300-2002 +12V/16A -12V/8A NOTES CE-300-2003 +15V/13A -15V/6A Consult factory for alternate output configurations. CE-300-2004 +24V/8A -24V/4A Consult factory for positive, negative or floating outputs. CE-300-1001 5V/60A Refer to Applications Information for complete output power ratings. CE-300-1002 12V/25A All specifications are maximum at 25° C, 300W unless otherwise stated, may vary by CE-300-1003 15V/20A model and are subject to change without notice. CE-300-1004 24V/12A Specify optional power fail, overvoltage protection or remote on/off when ordering. INTEGRATED POWER DESIGNS 300 Stewart Road ■ Wilkes-Barre, PA 18706 ■ Phone: (570) 824-4666 ■ Fax: (570) 824-4843 ■ Email: sales@ipdpower.com ■ Web: www.ipdpower.com CE-300 SERIES MECHANICAL SPECIFICATIONS APPLICATIONS INFORMATION 1. Semiconductor case temperatures must not exceed 110°C. COVER WITH FAN 2. Each output can deliver its rated current but total output power must not exceed 8.50 (215.9) 300 watts. 6.00 (152.4) 1.25 (31.8) 3. Internal fan provides airflow to cool internal components. Area around fan and TB2 vent openings must be kept clear to allow unrestricted airflow in and out of these 8O (+)UTPUT 5 7 (−) OUTPUT 5 6 (+) OUTPUT 4 openings. 5 (−) OUTPUT 4 4 (+) OUTPUT 3 4. This product is intended for use as a professionally installed component within 3 (−) OUTPUT 3 TB2 2O (+)UTPUT 2 information technology. 1O (−) UTPUT 2 4.90 (124.5) 5. A minimum load of 10% is required on output one to ensure proper regulation of P1 12 (−) SENSE, OUTPUT 2 4.00 (101.6) remaining outputs. 1 11 (+) SESNE, OUTPUT 2 10 (−) OUTPUT 2 6. Remote sense terminals may be used to compensate for cable losses up to 9 (+) OUTPUT 2 TB1 8 (+) REMOTE SIG 7 (−) REMOTE RTN 250mV. The use of a twisted pair is recommended as well as a decoupling N AC P1 6 (−) P.F. RTN INPUT 5 (+) P.F. SIG L capacitor (0.1 - 10µF) and a capacitor of 100µF/amp connected across the load 1 4 (−) SENSE, OUTPUT 1 GND G 3 (+) SENSE, OUTPUT 1 side. 2 (−) OUTPUT 1 1 (+) OUTPUT 1 .45 (11.4) 7. Peak to peak output ripple and noise is measured directly at the output terminals 6−32 of the power supply, without the use of the probe ground lead or retractable tip, MTG HOLE (4 PLACES − BASE) 20 MHz bandwidth. 8. This product was type tested and safety certified using the dielectric strength test voltages listed in Table 5B of UL 60950-1. In consideration of Clause 5.2.2, care must be taken to insure that the voltage applied to a reinforced insulation does not overstress basic insulation. Secondary to ground capacitors may need 2.30 (58.4) 5.00 (127.0) 6−32 MTG HOLE to be removed prior to performing a dielectric strength type test on the end (4 PLACES) product. It is highly recommended that the DC equivalent test voltages be used 1.95 (49.5) when performing a production-line dielectric strength test of the assembled end 1.00 (25.4) product. Please consult factory before performing an AC dielectric strength test. .50 (12.7) 9. This power supply has been safety approved and final tested using a DC dielectric strength test. Please consult factory before performing an AC dielectric ALL DIMENSIONS: INCHES (MM) strength test. 10. Maximum screw penetration into chassis mounting holes is .188 inches. MAXIMUM OUTPUT POWER VS. AMBIENT TEMPERATURE V3 ADJUST V2 ADJUST 300 V1 ADJUST 280 OUTPUT 1 260 240 220 200 TB2 180 160 P1 140 120 100 80 60 40 20 0 0 102030 40506070 A m b ien t T e m p eratu re (C ) CONNECTOR SPECIFICATIONS TB1 AC Input Terminal block with 6-32 screws on 0.325 centers mates with #6, 0.26 inch wide spade terminals. (10 in-lb max) TB2 DC Output Terminal block with 6-32 screws on 0.325 centers mates with #6, 0.26 inch wide spade terminals. (10 in-lb max) + / - DC Output 10-32 threaded studs mate with #10 ring tongue terminals. P1 Option/Sense .100 breakaway header mates with Molex 22-01-2127 or equivalent crimp terminal housing with Molex 6459 or equivalent crimp terminal. INTEGRATED POWER DESIGNS 300 Stewart Road ■ Wilkes-Barre, PA 18706 ■ Phone: (570) 824-4666 ■ Fax: (570) 824-4843 ■ Email: sales@ipdpower.com ■ Web: www.ipdpower.com Output Power (Watts)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products