Submittal Spec Sheet EMTJ Series Data Line Surge Protection The EMTJ Series devices guard sensitive data networks against lightning induced surges, AC power interference, electrostatic discharge, and ground loop energies. Typical applications include: NICs, switches, hubs, repeaters, bridges, routers, point-of-sale terminals, modems, fax machines, telephones and most other types of communications equipment utilizing RJ45 or RJ11 modular telephone jacks. High speed avalanche diode technology is used in conjunction with low capacitance circuitry, enabling the protectors to function at a much greater bandwidth without causing signal degradation. Standard units are available with up to 8 wires protected on the RJ45 devices, and up to 6 wires protected on the RJ11 device. Ideal for RJ11 and RJ 45 — Style Twisted Pair Interfaces All this, in combination with their small size, makes the EMTJ exceedingly versatile. Introduction The EMTJ Series of surge protectors for RJ45 and RJ11 Installation connectors will ensure the reliable operations of devices in a wide variety of environments. We offer protection for LAN To install, insert the protector in series between the incoming interface technologies such as Ethernet,10/100Base-T, CAT5, communication line and the I/O port of the equipment to be CAT5e, CAT6, and Power over Ethernet. For WAN and Telco protected. The protector ground wire must be connected to applications, we offer protection for ISDN, T-1, E-1, DDS, analog the metal chassis of the equipment being protected. Units should be installed at both ends of the data cable for the most dial-ups, and more. Additionally, our Custom Products Division effective protection. provides a solution for almost any application that sends data, voice or video over copper interconnects. Caution! EMTJs Offer Ground wire MUST be grounded directly to the metal chassis lState-of-the-art, avalanche diode and thyristor technology of the equipment being protected. The equipment chassis lMUST be connected to earth through a properly grounded AC Compact, in-line installation power receptacle.lHigh speed, high energy handling capability lLow shunt capacitance to reduce signal loss Warranty You Receive Eaton Corporation offers a standard 5-year warranty for data communications surge protection. For more information, visit lAffordable, superior, equipment protection www.EatonElectrical.com. lImproved reliability and maximized system up-time lProtection at the interface card lAdaptability to most industry applications ALL PRODUCTS (except CAT6 - PPC) 1' Cord Set RJ11 or RJ45 Male/Male Adapter 9' Cord Set RJ11 or RJ45 Male/Male Adapter CAT 6 - PPC ONLY Electrical SpeciŢcations Peak Pulse Current Maximum Shunt SpeciŢcation Standard Clamp Voltage (10/1000 us s.c. Waveform @Vcl) Response Time Capacitance 10Base-T RS/422/423 7.5 Volts 132 Amps < 5 Nanoseconds <40 pF 100Base-T Ethernet CAT5/5E 12 Volts 97 Amps < 5 Nanoseconds <25 pF 1000Base-T Ethernet CAT6 7.5 Volts 132 Amps < 5 Nanoseconds <5 pF (Device Only) Power over Ethernet Pins 1, 2, 3 & 6 — 7.5 Volts Pins 1, 2, 3 & 6 — 132 Amps < 5 Nanoseconds <25 pF (Ethernet Lines Only) Pins 4, 5, 7 & 8 — 60 Volts Pins 4, 5, 7 & 8 — 50 Amps RS-232 18 Volts 60 Amps < 5 Nanoseconds <40 pF Digital, ISDN, DDS, T-1/E-1, CSU/DSU 60 Volts 50 Amps < 5 Nanoseconds <75 pF Analog Dial-up/Modem Fax 240 Volts 75 Amps < 5 Nanoseconds <95 pF Note: Subject to change without notice. a System Application and Catalog Number 10Base-T 100Base-T Application Wires Protected Ethernet Ethernet RS-422/RS-423 RS-232 CSU/DSU ISDN RJ-11 2 Wire, 2 Center Pins — — — — — — RJ-11 4 Wire, 4 Center Pins — — EMTJ04E/RJ11 — — — RJ-11 6 Wire, All Pins — — EMTJ06E/RJ11 — — — RJ-45 1, 2, 3, 6 EMTJ04E/RJ45 — — — — — RJ-45 1, 2, 4, 5 — — — — — — RJ-45 1, 2, 7, 8 — — — — — — bc bc RJ-45 4 Wire, 4 Center Pins — — EMTJ04E/RJ45-C EMTJ04T/RJ45 EMTJ-ISDN EMTJ-ISDN RJ-45 8 Wire, All Pins EMTJ08E/RJ45 EMTJ-C5E EMTJ08E/RJ45 EMTJ08T/RJ45 EMTJ-DIGITAL — 1000Base-T Application Wires Protected DDS T1 Dial-up Modem/Fax Ethernet CAT 6 Power over Ethernet RJ-11 2 Wire, 2 Center Pins — — EMTJ02G/RJ11 — — RJ-11 4 Wire,4 Center Pins — — EMTJ04G/RJ11 — — RJ-11 6 Wire, All Pins — — EMTJ06G/RJ11 — — RJ-45 1, 2, 3, 6 — — — — — c RJ-45 1, 2, 4, 5 — EMTJ-T1 — — — c RJ-45 1, 2, 7, 8 EMTJ-DDS — — — — RJ-45 4 Wire, 4 Center Pins — — — — — RJ-45 8 Wire, All Pins EMTJ-DIGITAL EMTJ-DIGITAL EMTJ08G/RJ45 CAT6-PPC EMTJ-PoE 60V a See Ordering Guidelines below. b With pins 1 and 8 passed through. b Not UL listed. Note: All speciŢcations and dimensions are subject to change without notice. Ordering Guidelines Note: Do not include any dashes, brackets or hyphens in the catalog numbers when ordering. Example: EMTJ04E/RJ45-C = EMTJ04ERJ45C. MADE IN THE USA © 2005 Eaton Corporation All Rights Reserved Printed in USA PS01001001E / Z3297 June 2005