SB686BX Single Board Computer Features Your choice of Intel Pentium or Celeron processor (See www.icsadvent.com for available processor speeds) industry applications: telecom infrastructures industrial automation enhanced services machine control broadcasting convergence IP telephony call centers medical CPE IVR formerly Industrial Computer Source Document 1735 04/06/00 benefits features ® ® Next-generation processors provide superior PC Intel Pentium or Celeron™ processors performance for advanced media and (See www.icsadvent.com for available communications applications processor speeds.) Proven compatibility and performance Intel 440 BX AGP chipset Industry-leading expandability and reliability 82443BX PCI/AGP controller (PAC) 82371EB PCI/ISA/IDE accelerator chip Industry-leading 2D and 3D graphics performance (PIIX4E) ® Supports prevalent operating system Windows 95, 98, NT, Solaris, SCO, Linux, and QNX Support for emerging technologies Enhanced EPP and ECP modes No expansion slot required All ICS Advent products are covered by a Comprehensive service and support for top 2-year warranty quality products specifications Processor Support Dual Floppy Drive Controller Intel Pentium or Celeron (See www.icsadvent.com for available Supports 1.44MB, 1.2MB, 720K, and 360K floppy drives processor speeds.) Can be disabled by BIOS CPU Socket: Intel Pentium II Slot 1 right-angle connector Universal Serial Bus Chipset: Intel 440BX AGP chipset Universal Host Controller Interface (UHCI) configuration Cache: L2 cache onboard (dependent on Pentium processor) Dual USB connectors at the chassis rear panel via separate optional cable and bracket assembly Memory Watchdog Timer Capacity: 16MB minimum to 256MB (non-ECC) or 512MB (ECC) Forces reset if decoded I/O space is not written to within Form factor: 168-pin DIMM specified timeout period DIMM socket: gold contacts +5VDC monitor: If VCC falls below 4.5VDC, a reset occurs DRAM types: 64/72-bit EDO Programmable via software to 100ms, 250ms, or 500ms DRAM, 64/72-bit SDRAM (PC100, 100MHz) Enable and disable by jumper or software DRAM data integrity types: BIOS configurable EC, ECC, and Note: Prefail detect IRQ signal output can be routed to IRQ10 non-ECC or IRQ11 via jumper. This option triggers ISA bus IRQ if DRAM type detection: Autodetection algorithm, serial presence decoded I/O space is not written to within half of specified detect mechanism timeout period. Bus Support Real-Time Clock ISA-AT Bus: 64 mA IOL with 32mA IOH Motorola MC146818A compatible PCI: 33MHz PCI 2.1 compliant 256 bytes of battery-backed RAM GTL+: 100 MHz or 66MHz switch selectable to match the Up to seven years of battery-backup protection Pentium used (see Processor Support for additional details) Clock source at 14.318MHz accurate to ±1720Hz AGP: Accelerated Graphics Port with 100MHz local CMOS Battery memory interface Onboard lithium 3.0V battery with diode protection circuitry Graphics Controller Intel740 AGP SVGA 3D Accelerated Graphics controller AMI Hi Flex BIOS Plug-n-Play compatible 8MB high-speed, 64bit SGRAM with 100MHz interface DB15 connector at rear panel 2MB flash upgradeable with support for BIOS upgrade Peak data transfers up to 533MB/s via software Integrated 24-bit 220MHz RAMDAC Operating Systems, 32 Bit Display resolutions up to 1600x1200 Windows 95, Windows 98 Second Edition – full support Graphic functionality disabled and all resources Windows NT V4.0 and later, server or workstation – full free if option not installed support Can be disabled by BIOS Solaris 2.5.1 and later QNX V4.24-video support limited to a maximum of 800 x 600 Dual Serial Ports 16C550 compatible dual serial port controller by operating system 16 byte receive and transmit FIFO buffers Red Hat Linux V5.2 – video support limited to 80 x 25 text Serial 1 RS-232 Port to DB9 at rear panel mode by operating system Serial 2 RS-232 Port 10-pin shrouded Operating Environment ESD protected to ±15kV Temperature: 0 to 60° C Can be disabled by BIOS Humidity: 5 to 95% RHNC Parallel Port Shock: 2G, any axis Single parallel port controller with bidirectional capability Vibration: 0.5G, 10 to 2000Hz, any axis Enhanced EPP and ECP modes Altitude: to 10,000 ft (3,048m) pressure altitude Connected to 26-pin shrouded header MTBF Can be disabled by BIOS 110,000POH@25 C Keyboard Connector Controller connected to header connector Power supplied through +5VDC self-healing fuse Note: You may configure the keyboard as absent or present by system BIOS. If absent, you can boot the system without a keyboard attached. EIDE Controller Integrated enhanced IDE fixed disk controller on PCI local bus Supports up to four drives: primary master and slave, secondary master and slave Supports PIO Mode 4 and Ultra DMA/33 Can be disabled by BIOS