Model SB486PV Series Single Board Computer FEATURES � 80486SX Through P24T Processors � 33Mhz to 100Mhz CPU Clocks � On-board PCI Bus IDE and SVGA Video � 128K or 512K External Cache RAM � Up to 64MB On-board DRAM � Made in the USA! DESCRIPTION The SB486PV Series employ state of the art of hard disks in the fastest modes available. Newer electronics into a passive backplane architecture for drivers, capable of Multiple Read and Multiple Write industrial applications. The SB486PV provides all the commands, will enjoy their best throughput in this system. features of a basic system on one plug-in card. On-board To further maximize the disk throughput speeds, 128K of controllers included are, dual serial port, single parallel Cache memory is standard with 512K optional. For port, and floppy controller. While each controller is itself application requirements, the SB486PV includes two 72- an enhancement over the norm, there are additional pin SIMM sockets; supporting 1x36, 2x36, 4x36, and features on the card well beyond those of typical cards. 8x36 SIMMs, for up to 64MB of system DRAM. The enhancements of the standard controllers include The SVGA video controller, located on the PCI Local 16550 compatible serial ports with FIFO buffers and a bus, utilizes a Cirrus Logic Device Controller, and 1MB floppy controller capable of handling two disk drives of of VRAM. Resolutions of up to 1024 x 768 (Non- 360K, 1.2M, 720K, 1.44M or 2.88M in any combination. Interlaced) in 256 colors can be achieved as well as standard 640 x 480, to True Color 16M colors, and 800 The EIDE fixed disk controller, located on the PCI x 600, to 64K colors, VESA standard resolutions. local bus, is capable of supporting two hard disks. The Winmark ratings of up to 24M are achieved at 640 x 480 Intel Saturn-2 chip-set, PCI local bus implementation, x 256 Colors - comparable with many expensive ISA and AMI Windows oriented BIOS, permit easy installation graphics accelerators! 1 Document 1079, 1/6/98 Model SB486PV Series DESCRIPTION Standard models are available with 80486SX, Additionally for industrial applications, the SB486PV 33MHz, 80486DX, 33MHz, 80486DX2, 33/66MHz, offers a built-in Watch Dog Timer which monitors the 80486DX4, 33/100MHz , or (when available from Intel) address lines of the processor. If these lines stop toggling, the P24T, 66MHz processors. The processor installs in i.e. the processor stops running, the Watch Dog Timer a ZIF (Zero Insertion Force) socket. Jumper selections will automatically reset the computer. Application permit easy field upgrade of any processor, except the software, and associated costs, is not required for Watch P24T, to any higher performance processor in this series. Dog Timer operation. For example, if you purchase a unit with a 80486SX, The SB486PV is a standard AT Form Factor designed 33MHz, in the future, you can easily upgrade to a to plug into an ISA passive backplane, permitting older 80486DX4, 33/100MHz by switching processors. The passive backplane systems; 80286 through 80486DX, to SB486PV has on-board power regulators necessary to be easily upgraded to 100MHz processing power, with operate a 80486DX4 at 3.3VDC. For applications PCI Local Bus video, and IDE controller performance! operating in higher temperatures, the SB486PV provides a connector for a DC powered Fan Chip Cooler, such as the Industrial Computer Source SPN1-486Z, to keep the processor operating smoothly at elevated temperatures. SPECIFICATIONS Processors Supported Cache Memory 80486SX, 80486SX2, 80486DX, 80486DX2, 128K or 512K 80486DX4 and P24T in a ZIF Socket Write-Back or Write-Through Dependent on Processor Clock Rate Processor 25Mhz, 33Mhz, 25/50Mhz, 33/66Mhz, 25/ (PCI Bus) 75Mhz, 33/100Mhz and P24T Video Chip Set SVGA to 1024x768 x 256 Colors, NI Intel Saturn-2 Chip Set Cirrus Logic GD543X Chip BIOS 1MB VRAM AMI WinBIOS Full Feature, FLASH, Field Upgradable (software) 1MB Resolution Colors Memory Capacity 4MB to 64MB Maximum On-board 640 x 480 16M SIMM Support 800 x 600 64K 1 Bank, 2 Sockets, 72-Pin, Interleaved 1024 x 768 256 Supports 512Kx36(2MB), 1Mx36(4MB), 4Mx36(16MB), Horizontal Sync Siganls 8Mx36(32MB) SIMMs 31.5 - 60KHz Memory Speed Required Vertical Refresh 70 or faster 43 - 75Hz 24.9M WinMarks 2 Document 1079, 1/6/98 Model SB486PV Series SPECIFICATIONS EIDE Disk Controller Dimensions (L x H) (PCI Bus) 13.345" x 4.75" (339mm x 66mm) Exclusive of mounting bracket 2 drive capacity, Utilizes Multiple Read/Write Drives, PCTech RZ1000 Chip. 8 Layer Construction Support for a secondary IDE controller, installed When fittted with a CPU Chip Cooling Fan, the in an open ISA Expansion Slot Permitting up to CPU will require two expansion slots although a Four IDE Drives to be Installed in the system. half-length to 2/3 length feature board can be installed next to it. Floppy Controller Power Requirement 2 Floppy drives to 2.88M Supported +5V @ 1.4A without CPU or DRAM, Add Serial Ports Approx 1.0A for Processor 2 16550 Compatible, 16 byte FIFO buffer, +12V @ <100mA, Transmit and Receive, Internal Cables Included -12V @ <100mA, Parallel Port The +5V is Regulated Down to 3.3V at the ZIF Centronics compatible, compatible with software Socket for Processor Chips Requiring it. �dongle� keys, Rear Panel DB25S Operating Environment Keyboard Port Temperature: 0 to +70�C 5-Pin Header Humidity: 5 to 95% RHNC Speaker Port Storage Environment 4-Pin Header Temperature: -40 to +70�C Reset Port Humidity: 5 to 95% RHNC 2-Pin Header Operating Altitude 10,000 ft MTBF >77,500 P.O.H. @ 25�C ORDERING GUIDE Model SB4864PV/100 NON-VIDEO MODELS 80486DX4, 100MHz CPU, 128K Cache RAM, Model SB4864PVN/100 Serial Port Connectors 80486DX4, 100MHz CPU, 128K Cache RAM, Model SB4862PV/66 Serial Port Connectors, No SVGA 80486DX2, 66MHz CPU, 128K Cache RAM, Model SB4862PVN/66 Serial Port Connectors 80486DX2, 66MHz CPU, 128K Cache RAM, Serial Port Connectors, No SVGA ACCESSORY Model SPN1-486Z VIDEO MODELS CPU Cooling Fan & Heatsink Model SB4864PV5/100 80486DX4, 100MHz CPU, 512K Cache RAM, Serial Port Connectors Model SB4862PV5/66 80486DX2, 66MHz CPU, 512K Cache RAM, Serial Port Connectors 1-800-523-2320 3 6260 Sequence Drive, San Diego, CA 92121-4371 http://www.indcompsrc.com Document 1079, 1/6/98