iMcV MediaLinX Series 10/100 and 10/100/1000 Mbps Ethernet SNMP-Manageable, Switching Media Converters The iMcV MediaLinX series offers the most flexible Ethernet switching media converters in the industry. Dissimilar media types, protocols and duplex settings can make LAN internetworking and Fiber-to-the-Subscriber projects challenging undertakings. For example, if the service provider network infrastructure is 100 Mbps or Gigabit fiber but the customer wants to receive a standard 10 Mbps Ethernet interface to their LAN, making the connection between the two network segments can be difficult. The complexity of today's mixed media networks and the increasing demand for bandwidth requires access equipment that is both flexible in connecting different media types and scalable between different speeds. Convert speed, media and duplex mode: The iMcV MediaLinX series of switching media converters offers service providers and Same unit converts speed, media enterprise networks unparalleled flexibility in connecting copper-based networks to Fast and duplex mode! Ethernet or Gigabit fiber optic infrastructures. The SNMP-manageable MediaLinX convert- • Available in 10/100 and 10/100/1000 ers allow device managers to use Auto-Negotiation functionality on the twisted pair port models for plug-and-play operation, or to manually configure the port for the desired speed and Configure twisted pair port for Auto- duplex mode. What's more, you can even set the fiber port for Half- or Full-Duplex oper- Negotiation or force the speed ation (10/100 Mbps only). The iMcV MediaLinX series includes two models: Twisted pair and fiber ports can be iMcV-MediaLinX: individually configured for Half- or • One 10/100 twisted pair port with an RJ-45 connector. Full-Duplex operation  One 100 Mbps fiber port with ST, SC or MT-RJ connector(s)  Available with fault-tolerance (see below). Easy to configure and manage with iMcV-Giga-MediaLinX: GUI-based iView²  One 10/100/1000 twisted pair port with an RJ-45 connector. Up and running in less than 5 minutes  One 1000 Mbps fiber port with SC connector(s). Easily adjust settings when user iMcV-FT-MediaLinX provides a dual data path; during operation, the primary link seg- requirements change ment is active while the secondary link segment is non-active to prevent an illegal Easy upgrades; no user intervention Ethernet loop. If the primary link segment fails, iMcV-FT-MediaLinX automatically places or visits to remote locations required the secondary link segment online and makes the primary link segment non-active. This Monitor and control all connections allows connected devices to continue to transmit and receive data. Once the primary link segment is re-established, that link segment will become active once again. Meets a variety of installation requirements The iMcV MediaLinX series also includes troubleshooting features and LEDs to assist in Available for multi-mode or single- network diagnostics as well as make isolating cable breaks easier should they occur. mode fiber In addition, hot-swappable MediaLinX modules significantly reduce operation costs by Available for single-strand fiber allowing other modules within the same chassis to remain up and running during product upgrades, maintenance and troubleshooting.Available in fault-tolerant versions Easily configure and manage converters with the GUI-based iView²: Eases Troubleshooting As an SNMP management application, iView² gives network managers the ability to LinkLoss, FiberAlert, SNMP manage- monitor and control IMC Networks' products. iView² runs standalone on Windows ment and LEDs assist in diagnosing NT/XP/2000, as a standalone problems on fiber optic networks Java Application for other operating systems, as a snap- in module for HP OpenView, as a Web Server running under IIS or as a Java Web Servlet. For assistance in selecting the right version of iView² for your operating sys- tem, please visit our web site at the following: http://www.imcnetworks.com/go/iview2 www.imcnetworks.com 800-624-1070 www.mediaconverter.com Technical Specifications iMcV-MediaLinX All Modules  Installs in any iMediaChassis, iMediaCenter or  IEEE 802.3 10Base-T  IEEE 802.3x Flow Control MediaChassis  IEEE 802.3u 100Base-TX  AutoCross for MDI-II/MDI-X  Supports GUI-Based iView²  IEEE 802.3u 100Base-FX or SX fiber  Features LinkLoss and FiberAlert  Supports Half- and Full-Duplex operation  Available with fault-tolerance  Features Auto-Negotiation and Selective  Includes diagnostic LEDs  Switch-over rate: 8 milliseconds (FT only) Advertising  Includes hot-swappable architecture  Supports jumbo packets up to 1916 bytes  Layer 2 packet switching, store and forward Regulatory Approvals: operation · FCC Class A · UL/cUL, CSA, CE iMcV-Giga-MediaLinX  Forwarding rate: 14,880pps for 10 Mbps; Shipping Weight: .30 lbs (.11 kg)  IEEE 802.3 10Base-T 148,800pps for 100 Mbps; Operating Temperature:  IEEE 802.3u 100Base-TX 1,488,000pps for 1000 Mbps (Gig only) 32° to 122°F (0° to +50°C); 5% to 90% (non-condensing),  IEEE 802.3ab 1000Base-T twisted pair  50/125µm or 62.5/125µm multi-mode fiber 0 – 10,000 ft. altitude  IEEE 802.3z 1000Base-LX or SX fiber  9/125µm single-mode fiber Storage Temperature: -13° to +158°F (-25° to +70°C);  Supports packets up to 1536 bytes  Available for single-strand fiber 5 to 90% (non-condensing)  Connectors: RJ-45, and ST, SC or MT-RJ Fiber Optics Specifications For each product listed below in the Ordering Information section, the number in the [XX] denotes an approximate fiber distance based on industry-stan- dard fiber specifications and worst-case (connector loss, aged fiber, splices, etc.) installations. You can typically achieve substantially longer distances. Actual distances may vary for each installation. For complete power budgets and information on calculating specific distances, please visit web site our at www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000. Twisted pair distance is 100 meters. Ordering Information iMcV-MediaLinX iMcV-FT-MediaLinX Fault-Tolerant 56-14911 iMcV-MediaLinX, TX/FX-MM1300-ST [2 Km] 56-14962 iMcV-FT-MediaLinX, 2*TX + FX-SM1310/PLUS-ST [40 Km] 56-14912 iMcV-MediaLinX, TX/FX-MM1300-SC [2 Km] 56-14963 iMcV-FT-MediaLinX, 2*TX + FX-SM1310/PLUS-SC [40 Km] 56-14964 iMcV-FT-MediaLinX, 2*TX + FX-SM1310/LONG-ST [80 Km] 56-14911-MT iMcV-MediaLinX, TX/FX-MM1300-MT [2 Km] 56-14965 iMcV-FT-MediaLinX, 2*TX + FX-SM1310/LONG-SC [80 Km] 56-14915 iMcV-MediaLinX, TX/FX-SM1310/PLUS-ST [40 Km] 56-14966 iMcV-FT-MediaLinX, 2*TX + FX-SM1550/LONG-SC [100 Km] 56-14916 iMcV-MediaLinX, TX/FX-SM1310/PLUS-SC [40 Km] 56-14917 iMcV-MediaLinX, TX/FX-SM1310/LONG-ST [80 Km] iMcV-Giga-MediaLinX 56-14918 iMcV-MediaLinX, TX/FX-SM1310/LONG-SC [80 Km] 56-14950 iMcV-Giga-MediaLinX, TX/SX-MM850-SC [300 m] 56-14921 iMcV-MediaLinX, TX/FX-SM1550/LONG-SC [100 Km] 56-14951 iMcV-Giga-MediaLinX, TX/LX-SM1310-SC [10 Km] 1 iMcV-MediaLinX Single-Strand Fiber 56-14952 iMcV-Giga-MediaLinX, TX/LX-SM1310/PLUS-SC [40 Km] 56-14944 iMcV-MediaLinX, TX/SSFX-SM1310-SC [20 Km] 56-14953 iMcV-Giga-MediaLinX, TX/LX-SM1310/LONG-SC [70 Km] 56-14945 iMcV-MediaLinX, TX/SSFX-SM1550-SC [20 Km] 1 iMcV-Giga-MediaLinX Single-Strand Fiber 56-14946 iMcV-MediaLinX, TX/SSFX-SM1310/PLUS-SC [40 Km] 56-14940 iMcV-Giga-MediaLinX, TX/SSLX-SM1310-SC [10 Km] 56-14947 iMcV-MediaLinX, TX/SSFX-SM1550/PLUS-SC [40 Km] 56-14941 iMcV-Giga-MediaLinX, TX/SSLX-SM1550-SC [10 Km] 56-14948 iMcV-MediaLinX, TX/SSFX-SM1310/LONG-SC [60 Km] 56-14949 iMcV-MediaLinX, TX/SSFX-SM1550/LONG-SC [60 Km] 56-14942 iMcV-Giga-MediaLinX, TX/SSLX-SM1310/PLUS-SC [40km] 56-14943 iMcV-Giga-MediaLinX, TX/SSLX-SM1550/PLUS-SC [40 Km] iMcV-FT-MediaLinX Fault-Tolerant 56-14929-MT iMcV-FT-MediaLinX, TX + 2*FX-MM1300-MT [2 Km] 56-14960 iMcV-FT-MediaLinX, 2*TX + FX-MM1300-ST [2 Km] 56-14961 iMcV-FT-MediaLinX, 2*TX + FX-MM1300-SC [2 Km] 1 These products have single-strand fiber technology. Deploy in pairs, or connect to another compatible IMC Networks single-strand fiber product. For more information go to: www.imcnetworks.com/products/SSFX.cfm Related Products — iMcV Series Modules The iMcV Series includes 10 Mbps (iMcV-PIM), 100 Mbps (iMcV-LIM), autosensing 10/100 Mbps (iMcV-LIM 10/100), 155 Mbps ATM (iMcV-ATM) and Gigabit Ethernet (iMcV-Gigabit) copper-to-fiber media conversion modules as well as 10/100 and 10/100/1000 switching media converters (MediaLinX series). T1/E1/J1 media converters (iMcV-T1/E1/J1), DS3/E3 media converters (iMcV-DS3/E3) and VDSL to Ethernet media converters (iMcV-VDSL-LANextender) are also avail- able. In addition, IMC Networks has the most extensive line of protocol-independent (iMcV-S2MMs, iMcV-S2SMs and iMcV-M2MMs) fiber mode conversion mod- ules. The iMcV series also includes: iMcV-FiberLinX, iMcV-WDM and iMcV-FiberWay modules. Single-strand fiber versions are available for many of our media converters. For more information on the various products in the iMcV Series, please refer to the IMC Networks Web site at: http://www.imcnetworks.com/Products/ProdDir.cfm Copyright © 2005 IMC Networks. All rights IMC Networks IMC Networks IMC Networks IMC Networks reserved. The information in this document is Headquarters Europe Eastern US/Latin America Fiber Consulting Services subject to change without notice. IMC Networks assumes no responsibility for any errors that may 19772 Pauling Herseltsesteenweg 268 18840 US Hwy. 19 North Suite 400 For information call: appear in this document. Specific product names Foothill Ranch, CA 92610 B-3200 Aarschot Belgium Clearwater, FL 33764 TEL: 949-465-3000 may be trademarks or registered trademarks and TEL: 949-465-3000 TEL: +32-16-550880 TEL: 727-524-8152/524-8071 (Latin) 1-800-624-1070 (US/CAN) are the property of their respective companies. FAX: 949-465-3020 FAX: +32-16-550888 FAX: 727-524-8432 +32-16-550880 (Europe) sales@imcnetworks.com eurosales@imcnetworks.com latinsales@imcnetworks.com fcs@imcnetworks.com Document #56-90911 September 2005 www.imcnetworks.com