iMcV-DS3/E3/STS-1 DS3/E3 Converters with Remote Management Protocol-selectable DS3/E3/STS-1 converter extends transmission distances over fiber optics and reduces operational costs with remote end management. The iMcV-DS3/E3/STS-1 converter is perfect for telecommunications and services networks, as well as enterprise campus networks utilizing DS3/E3/STS-1 coaxial circuits in high-speed data networking. iMcV-DS3/E3/STS-1 enable users to convert the coax media to single-mode fiber to extend the distance of data transmissions over MAN access networks up to 100 Km. Also use iMcV-DS3/E3/STS-1 modules in premises network applications to convert the in- coming circuit to multi-mode fiber for distribution into the structured cabling system. Switch Selectable Protocol Available with remote management via the fiber port, iMcV-DS3/E3/STS-1 products enable • Operates at 45 Mbps (DS3), 34 Mbps network managers to conduct loopback testing, and monitor and manage units located up to 100 Km away at a remote location. Since IMC Networks’ management technology func- (E3) or 52 Mbps (STS-1) tions transparently to the frame format, customers will not experience overhead or loss of Management a data channel typically associated with remote management or SNMP polling. Customer traffic will always be full bit rate.Conduct loopback tests, monitor/ manage units via GUI-Based iView² iMcV-DS3/E3/STS-1 modules: Remote unit supports secure, in-band  Include one fiber port with ST or SC connectors management  Include one coax pair with a BNC connector Full bit rate for customer traffic  Have switch-selectable protocol to operate at 45 Mbps (DS3), 34 Mbps (E3) or 52 Mbps (STS-1). Supports more fiber choices  Install in any SNMP-manageable iMediaChassis or iMediaCenter, or in an Available for multi-mode or single- unmanaged MediaChassis. mode fiber  Include a mechanism for removing jitter from transmitted data Single-strand fiber versions  Are available in single-strand fiber versions that can effectively double the Supports very long fiber distances capacity of fiber. Eases Troubleshooting iMcV-DS3/E3/STS-1 modules make troubleshooting easy by including: Loopback testing modes, plus SNMP  A line integrity test feature management and LEDs, assist in  The FiberAlert feature that notes the loss of one strand of fiber at the receiver end, diagnosing problems on fiber optic then stops transmitting data and the link signal until a signal or link pulse is received networks  Two modes of operation (fiber and coax) for loopback testing  The Transmit Data Source diagnostic feature which sends specific patterns of data (transmit all unframed ones; transmit a pattern of zeros, and ones and transmit a Pseudorandom Bit Sequence [PRBS]) to determine problems with the cable. Easily configure and manage converters with the GUI-based iView²: As an SNMP management application, iView² gives network managers the ability to monitor and control IMC Networks' products. iView² runs standalone on Windows NT/XP/2000, as a standalone Java Application for other operating sys- tems, as a snap-in module for HP OpenView, as a Web Server running under IIS or as a Java Web Servlet. For assistance in selecting the right version of iView² for your operating system, please visit our web site at: http://www.imcnetworks.com/go/iview2 www.imcnetworks.com 800-624-1070 www.mediaconverter.com Technical Specifications  Protocol-Selectable — Operates at DS3  50/125µm or 62.5/125µm multi-mode fiber Operating Temperature: (45 Mbps), E3 (34 Mbps) or STS-1  9/125µm single-mode fiber 32° to 122°F (0° to +50°C); (52 Mbps) protocols Available for single-strand fiber 5% to 90% (non-condensing),  Includes ability to manage remote unit  Connectors: BNC, and ST or SC 0 – 10,000 ft. altitude  Conduct two types of loopback tests  Supports Half- and Full-Duplex Storage Temperature:  Full bit rate for customer traffic operation -13° to +158°F (-25° to +70°C);  Jitter attenuation  Includes diagnostic LEDs 5 to 90% (non-condensing)  Line build out  Includes hot-swappable architecture  Features FiberAlert  Installs in any iMediaChassis, Shipping Weight: .30 lbs (.11 kg) iMediaCenter or MediaChassis Regulatory Approvals:  Supports GUI-Based iView² · FCC Class A · UL/cUL, CSA, CE Fiber Optics Specifications For each product listed below in the Ordering Information section, the number in the [XX] denotes an approximate fiber distance based on industry-stan- dard fiber specifications and worst-case (connector loss, aged fiber, splices, etc.) installations. You can typically achieve substantially longer distances. Actual distances may vary for each installation. For complete power budgets and information on calculating specific distances, please visit web site our at www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000. Twisted pair distance is 100 meters. Ordering Information Always deploy iMcV-DS3/E3/STS-1 converters in pairs. 1 Multi-Mode (MM) Single-Strand Fiber 50-14300 iMcV-DS3/E3/STS-1, BNC/FX-MM1300-ST [2 Km] 50-14310 iMcV-DS3/E3/STS-1, BNC/SSFX-SM1310-SC [20 Km] 50-14301 iMcV-DS3/E3/STS-1, BNC/FX-MM1300-SC [2 Km] 50-14311 iMcV-DS3/E3/STS-1, BNC/SSFX-SM1550-SC [20 Km] 50-14312 iMcV-DS3/E3/STS-1, BNC/SSFX-SM1310/PLUS-SC [40 Km] Single-Mode (SM) 50-14313 iMcV-DS3/E3/STS-1, BNC/SSFX-SM1550/PLUS-SC [40 Km] 50-14302 iMcV-DS3/E3/STS-1, BNC/FX-SM1310/PLUS-ST [40 Km] 50-14314 iMcV-DS3/E3/STS-1, BNC/SSFX-SM1310/LONG-SC [60 Km] 50-14303 iMcV-DS3/E3/STS-1, BNC/FX-SM1310/PLUS-SC [40 Km] 50-14315 iMcV-DS3/E3/STS-1, BNC/SSFX-SM1550/LONG-SC [60 Km] 50-14304 iMcV-DS3/E3/STS-1, BNC/FX-SM1310/LONG-ST [80 Km] 50-14305 iMcV-DS3/E3/STS-1, BNC/FX-SM1310/LONG-SC [80 Km] 50-14306 iMcV-DS3/E3/STS-1, BNC/FX-SM1550/LONG-SC [100 Km] 1 These products have single-strand fiber technology. Deploy in pairs, or connect to another compatible IMC Networks single-strand fiber product. For more information go to: www.imcnetworks.com/products/SSFX.cfm Related Products — iMcV Series Modules The iMcV Series includes 10 Mbps (iMcV-PIM), 100 Mbps (iMcV-LIM), autosensing 10/100 Mbps (iMcV-LIM 10/100), 155 Mbps ATM (iMcV-ATM) and Gigabit Ethernet (iMcV-Gigabit) copper-to-fiber media conversion modules as well as 10/100 and 10/100/1000 switching media converters (MediaLinX series). T1/E1/J1 media converters (iMcV-T1/E1/J1), DS3/E3 media converters (iMcV-DS3/E3) and VDSL to Ethernet media converters (iMcV-VDSL-LANextender) are also avail- able. In addition, IMC Networks has the most extensive line of protocol-independent (iMcV-S2MMs, iMcV-S2SMs and iMcV-M2MMs) fiber mode conversion mod- ules. The iMcV series also includes: iMcV-FiberLinX, iMcV-WDM and iMcV-FiberWay modules. Single-strand fiber versions are available for many of our media converters. For more information on the various products in the iMcV Series, please refer to the IMC Networks Web site at: http://www.imcnetworks.com/Products/ProdDir.cfm Copyright © 2005 IMC Networks. All rights IMC Networks IMC Networks IMC Networks IMC Networks reserved. The information in this document is 19772 Pauling (Europe) (Eastern US/Latin America) Fiber Consulting Services subject to change without notice. IMC Networks assumes no responsibility for any errors that may Foothill Ranch, CA 92610 Herseltsesteenweg 268 18840 US Hwy. 19 North Suite 400 For information call: appear in this document. Specific product names TEL: 949-465-3000 B-3200 Aarschot Belgium Clearwater, FL 33764 TEL: 949-465-3000 may be trademarks or registered trademarks and FAX: 949-465-3020 TEL: +32-16-550880 TEL: 727-524-8152/524-8071 (Latin) 1-800-624-1070 (US/CAN) are the property of their respective companies. sales@imcnetworks.com FAX: +32-16-550888 FAX: 727-524-8432 +32-16-550880 (Europe) www.imcnetworks.com eurosales@imcnetworks.com latinsales@imcnetworks.com fcs@imcnetworks.com Document #50-90300 September 2005