MediaChassis Series Standalone Chassis for Customer Premises and Remote Access Points The MediaChassis series is an ideal solution for the fiber optic connectivity of remote locations or in applications with limited space. The MediaChassis series comprises compact, flexible table-top units that host a variety of IMC Networks fiber media modules supporting Ethernet, ATM/SONET, T1/E1, DS3/E3/STS-1 and WDM networking technologies. The MediaChassis series enables net- work operators to customize their networks by using the protocols most appropriate for each remote location. For example, some access points are further away and require the Meets various installation/application distance associated with single-mode fiber, while other locations require higher data rates requirements to accommodate the need for bandwidth-intensive applications. Providing ultra flexibil- • 1-slot and 2-slot models available ity, modular MediaChassis allow conversion between copper and fiber as well as between Available with AC or DC power two fiber types, at various speeds, depending on the installed module. Deploy these Use when SNMP management isn’t standalone chassis at the customer premises (CPE) or each access point and connect to a required multi-slot iMediaChassis* located at the central office (CO). Use AC and DC power options with the The MediaChassis series includes: same unit; IE-MediaChassis includes: • 1 slot and 2 slot models for installing any combination of iMcV series modules* A 4-terminal DC power block  An internal power supply that significantly increases reliability over products that A country-specific, high-reliability AC use bulky, external AC/DC power transformers. power adapter  Installation flexibility: table-top, rack and wall mount options An extended voltage range on the DC The MediaChassis series also includes an Industrial Ethernet (IE) model; power block IE-MediaChassis/1 includes: Space saving alternative  Two power options: 4-terminal DC power block and a country-specific external Standalone units designed with small, AC power adapter rugged enclosure  An extended voltage range on the DC power block: 6 to 50 VDC input Wall or rackmount with purchase of  DIN clips for mounting the enclosure on a DIN-rail brackets or rackmount shelf  An extended operating temperature of -45°C to +70°C when used with modules IE-MediaChassis/1 includes DIN clips that also accommodate the same operating temperature for mounting (parallel or perpendicular) Application Example on DIN-Rail Service provider, campus and enterprises networks can greatly benefit from the flexibility Install a wide variety of media modules of IMC Networks’ MediaChassis. Networks operators can easily connect multiple users 10, 100 and 1000 Mpbs Ethernet and and devices that have vastly different requirements by installing one or more T1/E1/J1 copper-to-fiber converters iMediaChassis at the central office, in the wiring closet or communications room and pair- 10 Mbps Ethernet copper-to-coax ing with MediaChassis populated with iMcV series modules of various protocols at each converters remote location. 10/100 Mbps autosensing copper-to- fiber converters DS3/E3 copper-to-coax converters End to end remote fiber management Fiber mode converters Fiber optic repeaters * Please refer to the respective datasheets on the iMediaChassis and each iMcV module for more information. www.imcnetworks.com 800-624-1070 www.mediaconverter.com Application Examples (continued) For both simple media conversion and optical demarcation, MediaChassis is the perfect solution for Customer Premises Equipment (CPE). For example, install an iMcV series FiberLinX* module into a MediaChassis enclosure to provide remotely managed optical access. Because iMcV-FiberLinX includes on- board SNMP, the MediaChassis becomes a managed device. The IE-MediaChassis/1 ships from the factory with DIN-clips, allowing installation on a DIN-rail. When installing multiple IE-MediaChassis/1 units on a DIN- rail, you can use one DC input source then cascade from one DC block to the next, until reaching the maximum current available. * Please refer to the datasheet on the iMcV FiberLinX series for more information. Technical Specifications  Includes 4-terminal DC power block for MediaChassis/1 MediaChassis cascading DC Power  Includes 1 slot for installing any iMcV module* Regulatory Approvals:  Includes DIN Clip designed for use on a DIN-35 rail  SNMP-manageable ONLY when module includes · FCC Class A · UL/cUL, CSA, CE on-board SNMP logic (i.e. iMcV-FiberLinX) Regulatory Approvals: AC Input: 100-240 VAC ±10%, 50/60 Hz, 1A max. Dimensions: 1.55”H x 4.75”L x 7.31”D · FCC Class A · UL/cUL, CSA, CE DC Input: 38-72 VDC (3.94cm H x 12.07cm L x 18.57cm D) AC Wall Adapter: 100/240 ±10% VAC input, Operating Temperature: 5VDC output MediaChassis/2 32° – 122°F (0° – 50°C); DC Jack: 5 to 20 VDC  Includes 2 slots for installing any iMcV module Storage Temperature:  SNMP-manageable ONLY when module includes DC Terminal Block: 7 to 50 VDC -13° to +158°F (-25° to +70°C) on-board SNMP logic (i.e. iMcV-FiberLinX) Dimensions: .90”H x 4.30” L x 4.00”D Humidity: 5% to 90%, noncondensing,  Available with AC or DC power (2.29cm H x 10.92cm L x 10.16cm D) 0 – 10,000 ft. altitude Dimensions: 2.30”H x 4.75”L x 7.31”D Operating Temperature: (5.84cm H x 12.07cm L x 18.57cm D) IE-MediaChassis/1 -40° to +158°F (-40° to +70°C) excluding AC wall  Includes 1 slot for installing any iMcV module* adapter; with AC wall adapter 32° to 122°F (0° to 50°C)  Includes country-specific, high-reliability *Does not support double-wide iMcV Modules Storage Temperature: -49° to 185°F (-45° to +85°C) AC power adapter Ordering Information Accessories— Rackmount/Wallmount Brackets Unmanaged Modular Chassis 95-39226 McBasic/MediaChassis Rackmount Brackets 50-13100 MediaChassis/1-AC — 1-slot, table-top, internal AC power 95-39227 McBasic/MediaChassis Wallmount Brackets 50-13101 MediaChassis/2-AC — 2-slot, table-top, internal AC power 95-39228 McBasic/MediaChassis x3 Rackmount Shelf 50-32101 MediaChassis/2-DC — 2-slot, table-top, internal DC power 50-33100 IE-MediaChassis/1 — 1-slot, table-top, includes AC power adapter For information/part numbers for iMcV series modules, please refer to the datasheet for the respective product. Copyright © 2005 IMC Networks. All rights IMC Networks IMC Networks IMC Networks IMC Networks reserved. The information in this document is Headquarters Europe Eastern US/Latin America Fiber Consulting Services subject to change without notice. IMC Networks assumes no responsibility for any errors that may 19772 Pauling Herseltsesteenweg 268 18840 US Hwy. 19 North Suite 400 For information call: appear in this document. Specific product names Foothill Ranch, CA 92610 B-3200 Aarschot Belgium Clearwater, FL 33764 TEL: 949-465-3000 may be trademarks or registered trademarks and TEL: 949-465-3000 TEL: +32-16-550880 TEL: 727-524-8152/524-8071 (Latin) 1-800-624-1070 (US/CAN) are the property of their respective companies. FAX: 949-465-3020 FAX: +32-16-550888 FAX: 727-524-8432 +32-16-550880 (Europe) sales@imcnetworks.com eurosales@imcnetworks.com latinsales@imcnetworks.com fcs@imcnetworks.com Document #50-90100 August 2005 www.imcnetworks.com