SBC SBC PC/104 Plus Two Slot Card Bus PM-1054A PCMCIA Module 2-slot PCMCIA Module PM-1038 PM-1038 PM-1054A SPECIFICATIONS SPECIFICATIONS Complies with PCMCIA2.1 and JEIDA4.2 standard Accepts TypeI/II/III PCMCIA cards Chipset: RICOH R5C478 Card Bus controller 16-bit data bus Data Bus: 32-Bit, 33MHz (133MB/s), DMA bus master (Compliant Easy host interface using ISA I/O addresses 3E0h,3E1h with PCI 2 .1) Programmable IRQs to level mode or edge trigger mode PC Card 95/97/98 32-bit CardBus compatible PCMCIA-AT-A Disk interface support Supports Plug & Play auto-detected & configuration DMA mode support Driver support: Windows 98/ME/NT/2000 Accepts PCMCIA Type I/II/III 2xPCMCIA slots PCMCIA The most cost-effective system board with full function included is the motherboard that usually be taken as the general-purpose usage. However, there are issues CardBus while considering with legacy applications such as multi serial communication port and ISA bus, due to In early 1995, PCMCIA introduced the 32-bit CardBus that kind of communication interface has gradually standard. Although electrically different, the CardBus replaced by higher performance transmission interface. is architecturally identical to the PCI bus. The CardBus In addition, the life cycles of the retail motherboard are supports bus mastering and accommodates cards usually no longer than one year and without version operating at different voltages. Its advanced power updating service. That will be limited some of the legacy management features allows the computer to take application requirements especially on industrial territory. advantage of CardBus cards designed to idle or turn There are more choices today. off in order to increase battery life. The CardBus Combing with the system board specification allows data transfer up to 132 Mbytes/sec of commercial new technical over a 33MHz, 32-bit data path. advantages and industrial high reliability characteristics. PCMCIA Key Features: IEI is launching the industrial Hot swap capability for Type I, II & III cards 85.6mm motherboard with guarantee TypeI=3.3mmthick Designed and developed for embedded systems TypeII=5.0mmthick 5 years long term support and TypeIII=10.5mmthick version updating control. Maximum six serial communications with ISA interface are suitable for traditional InterconnectArea 3.3mm appliances especially on factory 54.0mm automation. ORDERING INFORMATION PM-1054 PC/104 Plus card bus PCMCIA module (Supports IEI products only) ORDERING INFORMATION PM-1054A PC/104 Plus card bus PCMCIA with PC/104 (ISA Bus) connector module PM-1038 2-slot PCMCIA Module (Meets PC/104 Plus standard specification for general appliances) 3-81 3-82