SBC SBC JUKI-EDEN-400 PCISA Bus VIA EDEN/C3 CPU, LCD/CRT JUKI-C3-1G VGA, Dual LAN, USB, PC/104 & D I/O Supports TTL Display Supports LVDS Display 4 COM ports Dimensions ������ VGA ������ ����� USB 2.0 ����� ����� ����� Dual LAN ����� ����� ���� � PS/2 Keyboard/Mouse SPECIFICATIONS PCISA Bus It is combines both ISA and PCI bus CPU: Embedded low power consumption VIA Eden/C3 CPU (EBGA package) signals into a single edge connector. System chipset: VIA VT8606T (PN133T) with VT82C686B PCISA backplanes allow addition System memory: 1xSO-DIMM socket support up to 512MB of both ISA and PCI add-on cards. Display: Half-Size SBC is mostly applied in – On-chip ProSavage VGA controller compact and rugged enclosure, suied – Bus: AGP 4x for on the factory floor standalone – V-RAM: Shared with system memory up to 32MB (SMA technology) controller ot other applications in harsh – Resolution: 1920 x 1440 single display environments. – Connector: DB-15 for CRT display – LCD: 1 x 20-pin connector 36-bit Dual channel for LVDS and 1 x 50-pin by pin-header for TTL SSD: 1x onboard Compact Flash type II socket Ethernet: 2x onboard 10/100bps Intel 82551/RTL8100BL fast Ethernet controller I/O: – 4 x RS-232 serial ports by pin header Watch DOG Timer – 1 x LPT parallel port by pin header (Supports SPP/EPP/ECP mode) The Watch Dog Timer (WDT) is a – 1 x IrDA (SIR mode) special hardware device designed to – 3 x USB 2.0 and 2 x USB 1.1 by pin header monitor the computer system whether – 2 x ATA/100 IDE channel, supports CD-ROM, ZIP and LS-120 drive bootable functioning normally. It also offers (IDE1: 40-pin, IDE2: 44-pin) some measures to fix the system. IEI – 1 x PS/2 for Keyboard/Mouse provides software development kir – 1 x FDD connector, support 1.44/2.88MB and 3-mode floppy drive for timing application configurations. Audio: AC’97 Codec When time is up, WDT will send Reset WDT: Software programmable supports 1~255 seconds system reset signal to system for hardware reboot. PC/104: Expansion connector Operator can tune counting value into Digital I/O: TTL Level 4 - input and 4 - output WDT Configuration Register (write Hardware Monitoring: VT82C 686B (Provides CPU Vcore, Vcc; CPU/System the control value to the Configuration fan speed and temperature detecting function) Port), and clear WDT counter (read ATX power control function: Meets ACPI 1.1 specification the Configuration Port). Power Consumption: 5V@3.1A; (VIA EDEN 400MHz 256MB SDRAM) Operating Temperature: 0~60°C Counting Refresh Relative Humidity: 5~95%, non-condensing Note: For optional RS-232/422/485 serial port, please contact supplier AP Watch Dog ORDERING INFORMATION Timer System JUKI-EDEN-400N VIA EDEN 400MHz Dual Intel 82551 LAN, USB, PC/104 & Time-Out D I/O Reset Signal JUKI-EDEN-400R VIA EDEN 400MHz Dual RTL8100BL LAN, USB, PC/104 & D I/O JUKI-C3-1GN VIA C3 1GHz Dual Intel 82551 LAN, USB, PC/104 & D I/O JUKI-C3-1GR VIA C3 1GHz Dual RTL8100BL LAN, USB, PC/104 & D I/O 3-39 3-40 4xRS-232 Serial Ports ������ ����� ������ ������ ����� ����� ����� �