Multiport Serial Boards CI-132 Series 2-port RS-422/485 ISA serial boards › Economical RS-422/485 ISA boards with two DB9 male connectors on the board for easy wiring › RS-485 data direction control with ADDC® or by RTS › 921.6 Kbps maximum baudrate for super fast data transmission › 16-byte FIFO and on-chip hardware flow control › Surge protection and optical isolation available › Built-in termination resistors Overview The CI-132 series ISA boards come with 2 independent RS-422/485 environments with on-board surge protection and optical isolation serial ports for connecting data acquisition equipment and other serial (available with some models). Enjoy greater versatility by using devices to a PC. Connect your devices over longer distances—up point-to-point full duplex connections, or set up a half duplex RS-485 to 1.2 km (4000 ft)—and ensure greater reliability in industrial multi-drop network. Specifications Hardware Physical Characteristics Comm. Controller: 16C550C or compatible x 2 Dimensions: Bus: 16-bit ISA CI-132: 75 x 157 mm (2.95 x 6.18 in) Connectors: DB9 male x 2 CI-132I/IS: 105 x 157 mm (4.13 x 6.18 in) Serial Interface Environmental Limits Number of Ports: 2 Operating Temperature: 0 to 55°C (32 to 131°F) Serial Standards: RS-422/485 Storage Temperature: -20 to 85°C (-4 to 185°F) Max. No. of Boards per PC: 4 Ambient Relative Humidity: 5 to 95% (non-condensing) Altitude: Up to 2000 m Serial Line Protection Note: Please contact Moxa if you require products guaranteed to function ESD Protection: 25 KV on the board (CI-132IS only) properly at higher altitudes. Optical Isolation: 2 KV (CI-132I/IS only) Standards and Certifications Performance EMC: CE, FCC Baudrate: 50 bps to 921.6 Kbps EMI: EN 55022, FCC Part 15 Subpart B Class B Built-in Termination Resistor: 120 ohm (enabled by jumper for EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4 RS-485-2w) Green Product: RoHS, CRoHS, WEEE Serial Communication Parameters MTBF (mean time between failures) Data Bits: 5, 6, 7, 8 Time: 441,015 hrs Stop Bits: 1, 1.5, 2 Database: Telcordia (Bellcore), GB Parity: None, Even, Odd, Space, Mark Power Requirements I/O Address: 0x0000-0xFFFF (default = 0x180) Power Consumption: IRQ: 2 (9), 3, 4, 5, 7, 10 (default), 11, 12, 15 CI-132: 240 mA max. @ +5 V Serial Signals CI-132I/IS: 620 mA max. @ +5 V RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), RTS+(B), RTS-(A), Warranty CTS+(B), CTS-(A), GND Warranty Period: 5 years RS-485-2w: Data+(B), Data-(A), GND Details: See www.moxa.com/warranty RS-485 Data Control: ADDC® (automatic data direction control), or by RTS Driver Support Operating Systems: Windows 9X/ME/NT/2000, Windows XP/2003/ Vista/2008/7 x86/x64, Windows XP Embedded, DOS, Linux 2.4, Linux 2.6 x86/x64, QNX 4/6, FreeBSD 4/5, SCO OpenServer 5/6, UnixWare 7 Note: Please refer to Moxa’s website for the latest driver support information. 1 www.moxa.com info@moxa.com Multiport Serial Boards Ordering Information Available Models Package Checklist CI-132: 2-port RS-422/485 ISA serial board • 1 CI-132 board CI-132I: 2-port RS-422/485 ISA serial board with optical isolation • Documentation and software CD CI-132IS: 2-port RS-422/485 ISA serial board with optical isolation and surge protection • Quick installation guide (printed) • Warranty card © Moxa Inc. All Rights Reserved. Updated Sep. 5, 2012. Specifications subject to change without notice. Please visit our website for the most up-to-date product information. 2