ACE-818C - IEI - Elite.Parts

Description

IEI ACE-818C Power Supply - IEI +24 VDC input 140 W ATX / battery backup function power supply

Part Number

ACE-818C

Price

Request Quote

Manufacturer

IEI

Lead Time

Request Quote

Category

PSU & PERIPHERAL » ATX 1U/2U POWER SUPPLY

Specifications

Battery Backup and Hold up time

Upon loss of DC input, the unit must operate from the battery. Hold up time is around 2 minute on the battery capacity.

Connectors

TB1:Primary DC Input-3-position Terminal Blocks: TB2:DC output-6-position Terminal blocks; TB3:auxiliary 8-pin connector; TB4:Battery input-2-position Terminal blocks

Efficiency

Higher than 70% at 12V or 24VDC input

EMI

Designed to meet the following radiation limited: FCC docket 20780 curve “B” EN55022 class “B”

EMS

Designed to meet the following limits: EN61000-4-2 4KV contact; 8KV air discharge Criterion B, EN61000-4-3 10V/M with 80% AM Criterion A, EN61000-4-4 2KV Criterion B, EN61000-4-5 0.5KV Criterion B

Fan

Built-in cooling fan

Input Current

10A@+24VDC

Input polarity operation

When wrong polarity is connected to input terminal, should not cause any damage on the power supply.

Input Range

+18V~+32VDC

Min. Load

+5V/0.5A +12V/0.2A

MTBF

110,000 hrs

Operating temperature

0~50ºC

Power On Signal

This TTL compatible signal (active low) is use to switch ON the main output. When “Power ON” is disconnected from secondary common, all outputs except +5Vsb shall turn off.

Protection

over voltage, short circuit, and over load protection.

Safety

UL 1950, TUV EN 60950: 2000 meets CE

Shock

10G for 11ms half sine wave, one time for each of ±X, ±Y , ±Z axis.

Storage temperature

-20 ~85ºC

Vibration

10Hz~55Hz at 2G, 3minutes period, 30 minutes along X, Y, and Z axis.

Features

Efficiency: Higher than 70% at 12V or 24VDC input
Input polarity operation: When wrong polarity is connected to input terminal, should not cause any damage on the power supply.
Min. Load: +5V/0.5A +12V/0.2A
MTBF: 112,388 hrs (ACE-810V), 109,696 (ACE-818C)
Protection: over voltage, short circuit, and over load protection.
Safety: UL 1950, TUV EN 60950: 2000 meets CE
Shock : 10G for 11ms half sine wave, one time for each of ±X, ±Y , ±Z axis.
Storage : 2 x 2.5" HDD drive bays with RAID controllor on system board meet MIL-STD-810F 514.5C-1 standard (Military specification).
Vibration: 10Hz~55Hz at 2G, 3minutes period, 30 minutes along X, Y, and Z axis.

Datasheet

ACE-810V.pdf

318 KiB

Download

Extracted Text

Power Supply Power Supply ® �� ACE-810V DC Input 100W / 140W Power Supply with ACE-818C Battery Backup Function �� The ACE-810V/818C is designed for mobile �� PC applications. The most valuable feature is �� that it has a secondary battery input that keeps �� the power supply running when the primary �� 12V DC or 24V DC is lost. Then the power �� supply switches to battery backup mode. ACE- 810V/818C two kinds of signals VS1 and VS2. �� After the primary lost message is displayed, the PC may do a system shutdown that is controlled by the software program �� TB3 Cable � �� EN60601-1 C US SPECIFICA �� TIONS �� UL-2601 �� Input: �� Model Input Range Input Current ACE-818C +18V~+32V DC 10A@+24V DC �� ACE-810V +9V~+16V DC �� 14A@+12V DC � �� Output Rating: (at 50ºC) �� Rated Load Max. Load �� Model +5V +12V -12V +5Vsb +5V +12V -12V +5Vsb �� ACE-818C 16A 4A 0.5A 1A 20A 8A 0.5A 1.5A �� ACE-810V 8A 2A 0.5A 1A 12A 4A 0.5A 1.5A � �� Note:The total output continuous power shall be kept under 140W at 24VDC input (ACE-818C) � �� The total output continuous power shall be kept under 100W at 12VDC input and forced air-cooling. � � Without fan cooling is only 80W �� .(ACE-810V) �� Min. Load: +5V/0.5A +12V/0.2A �� Efficiency: Higher than 70% at 12V or 24VDC input � �� Protection: over voltage, short circuit, and over load protection. �� Input polarity operation: When wrong polarity is connected to input �� terminal, should not cause any damage on the power supply. �� Power On Signal: This TTL compatible signal (active low) is use to �� switch ON the main output. When “Power ON” is disconnected from � �� secondary common, all outputs except +5Vsb shall turn off. �� Battery Backup and Hold up time: Upon loss of DC input, the unit must �� operate from the battery. Hold up time is around 2 minute on the battery capacity. �� Built-in cooling fan �� MTBF: 110,000 hrs � �� Vibration: 10Hz~55Hz at 2G, 3minutes period, 30 minutes along X, Y, and Z axis. �� Shock : 10G for 11ms half sine wave, one time for each of ±X, ±Y , ±Z axis. � Safety: UL�� 1950, TUV EN 60950: 2000 meets CE � �� EMI : Designed to meet the following radiation limited : �� FCC docket 20780 curve “B” EN55022 class “B” �� EMS : Designed to meet the following limits � �� EN61000-4-2 4KV contact; 8KV air discharge Criterion B Dimensions �� EN61000-4-3 10V/M with 80% AM Criterion A � � � �� EN61000-4-4 2KV Criterion B � � � �� EN61000-4-5 0.5KV Criterion B �� Operating temperature : 0~50ºC �� Storage temperature: -20 ~85ºC �� Connectors : TB1- primary DC input: 3-position Terminal blocks TB2-DC output: 6-position Terminal blocks �� TB3-auxiliary 8-pin connector: �� TB4-Battery input: 2-position Terminal blocks �� Pin Define �� PIN TB1 TB2 TB3 TB4 1 + +5V Vin signal 1 (Hi, Lo) Battery (-) �� 2 - +5V Vin signal 2 (Hi pulse) Battery (+) �� 3 E GND +5Vsb �� 4 GND GND 5 +12V Power on 6 �� -12V NC �� 7 I/P Battery monitor (+) � �� 8 �� I/P Battery mo�n�� itor (-) � �� When Vin Signal 1 change state, Vin signal 2 will Provide one shot pulse between 0.2 sec and 0.6 sec ORDERING INFORMATION ACE-818C +24V DC Input 140W ATX / Battery Backup Function Power Supply 8-17 8-18 ACE-810V +12V DC Input 100W ATX / Battery Backup Function Power Supply

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products