Manufacturers
ICPDAS KA52F
Description
ICPDAS KA52F Power Supply - AC100~250V input, DC 24V/1A output, flat type power supply
Part Number
KA52F
Price
Request Quote
Manufacturer
ICPDAS
Lead Time
Request Quote
Category
PRODUCTS - K
Specifications
Derating
Derated from 100% at +38 °C
Efficiency
82% (Typ.)
EMI conduction & radiation
Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B
EMS Immunity
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
Frequency
50/60Hz
Harmonic current
Compliance to EN61000-3-2,3
Hold-up time
16ms at full load
Humidity
20% ~ 90% RH, non-condensing
Input current
40A / 230VAC
Isolation resistance
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Leakage Current(max.)
0.75mA / 240VAC
Line regulation
±1% (Line regulation is measured from low line to high line at rated load)
Load regulation
±2% (Load regulation is measured from 20% to 100% rated load)
MTBF
500Khrs min. MIL-HDBK-217F(25°C)
Operating Temperature
0 °C ~ +50°C
Output current
1.04A
Over current protection
130 ~ 180% rated output power
Over load protection
105 ~ 135% rated output voltage
Over voltage protection
Yes (clamp by Zener diode).
Protection type
Hiccup mode, recovers automatically after fault condition is removed
Recovers automatically after fault condition is removed
Ripple
180mVp-p
Safety standards
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 approved
Storage Temperature
-20 °C ~ +85°C
Temperature coefficient
±0.04%/°C (0~50°C)
Voltage
24VDC
Voltage range
100-250VAC
Withstand voltage
I/P-O/P:3KVAC , I/P-FG:1.5KVAC
Features
- 3 pole AC inlet IEC320-C14
- Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE
- Class power (with earth pin)
- Protections: Short circuit / Overload / Over voltage
- PWM 3842 control circuit and regulated
- Universal input voltage
Datasheet
Extracted Text
Accessories 7.1 Power Supplies & Battery Pack P7-1-1 7.2 Industrial Enclosures P7-2-1 7.3 Industrial USB Products P7-3-1 Accessories Power Supplies & Battery Pack Power Supplies & Battery Pack 7.1. Power Supplies & Battery Pack 7 SpeciŢ cations Models KA-52F DIN-KA52F KA-52F-48 DIN-KA52F-48 Input Range 100 ~ 250 VAC Frequency 50 ~ 60 Hz Output Power 24 VDC/1.04 A max., 25 W 48 VDC/0.52 A max., 25 W KA-52F Mechanical KA-52F-48 Dimensions 54 x 93 x 36 68 x 107 x 50 54 x 93 x 36 68 x 107 x 50 (W x H x D, Units: mm) Installation No-mounting DIN-Rail Mounting No-mounting DIN-Rail Mounting Environmental Operating Temperature 0 ~ +50 °C Storage Temperature -20 ~ +85 °C DIN-KA52F DIN-KA52F-48 KA-52F/DIN-KA52F Ordering Information KA52F-48/DIN-KA52F-48 KA-52F CR 24 VDC/1.04 A, 25 W Power Supply (RoHS) 1 DIN-KA52F CR 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting (RoHS) KA-52F-48 CR 48 VDC/0.52 A, 25 W Power Supply (RoHS) DIN-KA52F-48 CR 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting (RoHS) SpeciŢ cations Models GPSU06U-6 Input Range 100 ~ 250 VAC Frequency 50 Hz ~ 60 Hz Output Power 24 VDC/0.25 A max., 6 W Mechanical Dimensions (W x H x D) 32 mm x 66 mm x 68 mm Installation No-mounting Environmental Operating Temperature 0 ~ +40 °C Storage Temperature -20 ~ +85 °C GPSU06U-6 Ordering Information GPSU06U-6 CR 24 VDC/0.25 A, 6 W Power Supply (RoHS) Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. PAC 1.0.02 (2011.JAN.07) 7-1-1 ICP DAS CO., LTD Accessories Power Supplies & Battery Pack Programmable Automation Controller Products SpeciŢ cations Models MDR-20-24 MDR-60-24 MDR-60-48 Input 7 Range 100 ~ 250 VAC Frequency 50 ~ 60 Hz Output Power 24 VDC/1 A max., 24 W 24 VDC/2.5 A max., 60 W 48 VDC/1.25 A max., 60 W Mechanical Dimensions (W x H x D) 22.5 mm x 90 mm x 100 mm 40 mm x 90 mm x 100 mm 40 mm x 90 mm x 100 mm Installation DIN-Rail Mounting Environmental MDR-20-24 MDR-60-24/MDR-60-48 Operating Temperature -20 ~ +70 °C Storage Temperature -20 ~ +85 °C MDR-20-24 MDR-60-24 Ordering Information MDR-60-48 MDR-20-24 CR 24 V /1 A, 24 W Power Supply with DIN-Rail Mounting (RoHS) DC MDR-60-24 CR 24 VDC/2.5 A, 60 W Power Supply with DIN-Rail Mounting (RoHS) MDR-60-48 CR 48 VDC/1.25 A, 60 W Power Supply with DIN-Rail Mounting (RoHS) SpeciŢ cations Models DP-600 DP-1200 Input Range 100 ~ 250 VAC Frequency 50 ~ 60 Hz Output 24 VDC /2.5 A max., 60 W and Power 24 VDC /5.0 A max., 120 W 5 VDC /0.5 A max., 2.5 W 1 Mechanical Dimensions (W x H x D) 44 mm x 145 mm x 158 mm 65 mm x 111 mm x 125 mm Installation DIN-Rail Mounting DP-660 DP-1200 Environmental Operating Temperature 0 ~ +50 °C -10 ~ +70 °C Storage Temperature -20 ~ +85 °C -25 ~ +85 °C DP-660 DP-1200 Ordering Information DP-660 CR 24 VDC/2.5 A, 60 W and 5 VDC/0.5 A, 2.5 W Power Supply with DIN-Rail Mounting (RoHS) DP-1200 CR 24 VDC/5.0 A, 120 W Power Supply with DIN-Rail Mounting (RoHS) SpeciŢ cations Models BP-3400 (3450 mAh, Li-Polymer Battery) SpeciŢ cations Output Voltage 12 VDC Output Current Max. 3.5 A Input 19 VDC/3.16 A AC adapter Charge Time Within 5 hours Mechanical Casing Plastic Dimensions (W x H x D) 84 mm x 174 mm x 23 mm Environmental Operating Temperature -10 ~ +50 °C Storage Temperature -20 ~ +60 °C BP-3400 Ordering Information BP-3400 CR 3450 mAh, Li-Polymer Battery (RoHS) Website: http://www.icpdas.com E-mail: service@icpdas.com Vol. PAC 1.0.02 (2011.JAN.07) 7-1-2 Accessories Industrial Enclosures Industrial Enclosures 7.2. Industrial Enclosures 7 SpeciŢ cations Models I-950-ENC I-951-ENC Includes Case Accessory 2 x Polyamide cable glands 4 x captive lid screws 1 x DIN-rail (24cm) Mechanical I I- -950-ENC 950-ENC Casing Plastic Dimensions (W x H x D) 254 mm x 180 mm x 90 mm 254 mm x 180 mm x 111 mm Environmental Temperature 0 ~ +50°C for Protection rating IP66 I I- -951-ENC 951-ENC I-950-ENC I-951-ENC 2 Ordering Information I-950-ENC CR Industrial Enclosure (254 mm x 180 mm x 90 mm) (RoHS) I-951-ENC CR Industrial Enclosure (254 mm x 180 mm x 111 mm) (RoHS) SpeciŢ cations Models I-3625-ENC Includes Case Accessory 2 x Polyamide cable glands 6 x captive lid screws 1 x DIN-rail (24cm) Mechanical Casing Plastic Dimensions (W x H x D) 360 mm x 254 mm x 165 mm Environmental Temperature 0 ~ +50°C for Protection rating IP66 I-3625-ENC Ordering Information I-3625-ENC CR Industrial Enclosure (RoHS) Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. PAC 1.0.02 (2011.JAN.07) 7-2-1 ICP DAS CO., LTD Accessories Industrial USB Products Programmable Automation Controller Products 7.3. Industrial USB Products 7 SpeciŢ cations Models I-7560 (USB to RS-232 Converter) Interface USB Compatibility: USB 1.1 and 2.0 standards RS-232 TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND; non-isolated Baud Rate 300 ~ 115200 bps Driver Windows 98/ME/2000/XP/Vista (32/64-bit)/7 (32/64-bit)/Linux Mechanical Casing Plastic (Flammability UL 94V-0) Dimensions (W x H x D) 33 mm x 60 mm x 15 mm Environmental Operating Temperature -25 ~ +75 °C Storage Temperature -30 ~ +75 °C I-7560 Ordering Information I-7560 CR USB to RS-232 Converter (RoHS) SpeciŢ cations Models USB-2020 (USB Audio Device) Interface Output Channels Mono, Stereo (L + R) 3 Input Channels Mono, Stereo (L + R) Button HID volume up, volume down and Mute Input Voltage Range +10 ~ +30 VDC Mechanical Casing Plastic (Flammability UL 94V-0) Dimensions (W x H x D) 33 mm x 107 mm x 78 mm Installation DIN-Rail Environmental Operating Temperature -25 ~ +75 °C Storage Temperature -40 ~ +85 °C USB-2020 Ordering Information USB-2020 CR USB Audio Device (RoHS) SpeciŢ cations Models USB-2560 (4-Port Industrial USB 2.0 Hub) Interface Ports Upstream x 1 (Type B); Downstream x 4 (Type A) Compatibility SpeciŢ cation Rev. 2.0/1.1/1.0 Transfer Speed 480 Mbit/s-high speed mode Input Voltage Range +12 ~ +48 V DC Mechanical Casing Plastic (Flammability UL 94V-0) Dimensions (W x H x D) 33 mm x 107 mm x 78 mm Installation DIN-Rail Environmental Operating Temperature -0 ~ +70 °C Storage Temperature -20 ~ +80 °C USB-2560 Ordering Information USB-2560 CR 4-port Industrial USB 2.0 Hub (RoHS) USB-2560/S CR 4-port Industrial USB 2.0 Hub (RoHS) with GPSU06U-6 (Power Supply) Website: http://www.icpdas.com E-mail: service@icpdas.com Vol. PAC 1.0.02 (2011.JAN.07) 7-3-1
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the KA52F have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
24V/0.75A POWER SUPPLY ( NO- MOUNTING )
24V/0.75A power supply ( No- mounting )
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods