I-BUS IBC2801
Specifications
BIOS
Award BIOS. Customized BIOS available
Cache
512 Kbytes Integrated Full speed L2 cache
Chipset
Micron Copperhead/Coppertail
CompactPCI Bus Master
32/64 bit 33/66 MHz CompactPCI Bus interface. Stand-alone mode to operate in Peripheral slot
Dynamic RAM
Up to 2 GB of Double Data Rate (DDR) synchronous DRAM at 266 MHz . 32-bit PCI Mezzanine Card (PMC) Expansion
Enhanced IDE (Dual)
Dual IDE Interface up to 4 drives. ATA 100 with synchronous transfers up to 100MB/s
Ethernet Interfaces
Dual 10/100BaseTx Ethernet, Intel 82559ER. PICMG 2.16 compatible pin-outs w/ 2703 RIO
Mechanicals
1-Slot (4HP) x 6U CompactPCI Compliant. CompactPCI Compliant 2703 Rear I/O Board
Microprocessor
Single or dual Low Power Pentium III Processors at up to 933 MHz. Supports possible future Intel speed upgrades
Operating Environment
Temperature: 0° - +50° C. Storage: -40° - +85° C
Optional Storage Mezzanine Board
1.8" IDE HDD up to 20GB. CompactFlash up to 256MB or 1GB Microdrive
Power Requirements (Typical)
3.5A (single CPU) or 5A (dual CPU) at +5.0 volts. 2A (single CPU) or 3A (dual CPU) at +3.3 Volts. 24Watts (single CPU) or 34 Watts (dual CPU)
Processor
Intel Pentium III
SCSI Interface
Ultra 160 SCSI, LSI 53C1000. Supports future upgrades to Ultra 320
Standard I/O
Floppy drive interface, up to 2 drives. Dual 16C550 Serial Ports. Bi-directional Parallel Port with EPP and ECP. PS/2 Mouse Port. PS/2 Keyboard Interface
System Monitoring
On-board monitoring of voltages, temperatures. Optional PICMG 2.9 Compliant BMC/PM. Optional SNMP Agent Software Available
USB
One PC compatible USB port. Additional USB port on 2703 RIO rear panel
Video Interface
69030 PCI Video with 4MB Memory. 1280 x 1024 x True Color non-interlaced
Watchdog Timer
Software controlled with reset capability
Features
- 1 Gbyte IBM Microdrive
- Micron Copperhead/Coppertail chipset
- Single/dual Intel low-voltage Pentium III processors up to 800 MHz with 512 Kbs L2 cache
- Up to 2 Gbytes of DDR synchronous DRAM at 266 MHz
- Up to 256 Mbytes CompactFlash
Datasheet
Extracted Text
THE PRODUCT LINE www.ibus.com IBC 2801 ® Dual Low Power Pentium III System Master CPU Board PICMG 2.16 Compliant PICMG 2.16 Compliant Ordering Information Specifications IBC 2801-850 Microprocessor Video Interface Single Pentium III-M, 850 MHz w/dual • Single or dual Low Power Pentium III • 69030 PCI Video with 4MB Memory 10/100 Ethernet, Ultra 160 SCSI and SVGA Processors at up to 933 MHz • 1280 x 1024 x True Color non-interlaced IBC 2801-D850 • Supports possible future Intel® speed upgrades Dual Pentium III-M, 850 MHz w/dual 10/100 Enhanced IDE (Dual) Ethernet, Ultra 160 SCSI and SVGA Cache • Dual IDE Interface up to 4 drives IBC 2801-933 • 512 Kbytes Integrated Full speed L2 cache • ATA 100 with synchronous transfers up to 100MB/s Single Pentium III-M, 933 MHz w/dual 10/100 Ethernet, Ultra 160 SCSI and SVGA Chipset System Monitoring IBC 2801-D933 Dual Pentium III-M, 933 MHz w/dual 10/100 • Micron® Copperhead™/Coppertail™ • On-board monitoring of voltages, temperatures Ethernet, Ultra 160 SCSI and SVGA • Optional PICMG 2.9 Compliant BMC/PM ------------------------------------------------ Dynamic RAM • Optional SNMP Agent Software Available Memory Options • Up to 2 GB of Double Data Rate (DDR) syn- DSDM-128MB 128MB DDR SDRAM chronous DRAM at 266 MHz USB DSDM-256MB 256MB DDR SDRAM • One PC compatible USB port DSDM-512MB 512MB DDR SDRAM 32-bit PCI Mezzanine Card (PMC) Expansion • Additional USB port on 2703 RIO rear panel DSDM-1GB 1 GB DDR SDRAM DSDM-2GB Call CompactPCI Bus Master Standard I/O --------------------------------------------------- IBC 2703-RIO • 32/64 bit 33/66 MHz CompactPCI Bus interface • Floppy drive interface, up to 2 drives Rear I/O transition module for • Stand-alone mode to operate in Peripheral slot • Dual 16C550 Serial Ports 280X with 1.8” hard drive socket • Bi-directional Parallel Port with EPP and ECP Hard Drive Options Optional Storage Mezzanine Board • PS/2 Mouse Port HDD-5GB 5GB 1.8” IDE HDD • 1.8" IDE HDD up to 20GB • PS/2 Keyboard Interface HDD-10GB 10GB 1.8” IDE HDD • CompactFlash up to 256MB or 1GB Microdrive HDD-20GB 20GB 1.8” IDE HDD Mechanicals --------------------------------------------------- SCSI Interface • 1-Slot (4HP) x 6U CompactPCI® Compliant IBC 16010 - Storage Mezzanine Board • Ultra 160 SCSI, LSI 53C1000 • CompactPCI® Compliant 2703 Rear I/O Board for 280x with 1.8” hard drive socket and • Supports future upgrades to Ultra 320 CompactFlash socket Operating Environment BIOS • Temperature: 0° - +50° C Hard Drive Options • Award BIOS • Storage: -40° - +85° C HDD-5GB 5GB 1.8” IDE HDD • Customized BIOS available HDD-10GB 10GB 1.8” IDE HDD HDD-20GB 20GB 1.8” IDE HDD Power Requirements (Typical) Watchdog Timer • 3.5A (single CPU) or 5A (dual CPU) at +5.0 volts CompactFlash Options • Software controlled with reset capability • 2A (single CPU) or 3A (dual CPU) at +3.3 Volts CF-32MB 32MB CompactFlash • 24Watts (single CPU) or 34 Watts (dual CPU) CF-64MB 64MB CompactFlash Ethernet Interfaces CF-128MB 128MB CompactFlash • Dual 10/100BaseTx Ethernet, Intel 82559ER CF-256MB 256MB CompactFlash • PICMG® 2.16 compatible pin-outs w/ 2703 RIO MD-1GB 1GB Microdrive 0-20-05 Rev. H www.ibus.com IBC 2801 ® Dual Low Power Pentium III System Master CPU Board The IBC 2801 is fully CPSB PICMG 2.16 compatible to support Ethernet switched fabric backplane architectures. With the additional compatibility of PICMG 2.1 full hot-swap and PICMG 2.9 full IPMI system management, the IBC 2801 is a powerful, scalable, open architecture building block in high-reliability and high-availability CompactPCI-based server blade systems from I-Bus. The IBC 2801 supports Dual Low Power Embedded Intel Pentium III processors, operating at up to 933MHz. Program and data storage needs are met with support for up to 2 Gbytes of DDR SDRAM as well as 256+ Mbytes of CompactFlash or a 1 Gbyte IBM Microdrive, and a 1.8" IDE hard drive up to 20GB on board. Additional features include Ultra 160 SCSI with rear I/O, dual 10/100BaseTX Ethernet, 32-bit PMC expansion and on-board AGP Video. Also supported is the full set of standard PC peripherals including Ultra ATA/100, 1.44 Mbyte floppy, USB, RS-232 serial ports, parallel port, mouse and keyboard. Socket #2 Socket #1 Switching Regulator System SDRAM Mobile Tualatin Vcore Up to 2GBbytes uPGA478 Socket Angled DIMM184 Temp Sensor North Bridge Micron Copperhead Temp Sensor BGA629 Mobile Tualatin Clock Generators Switching uPGA478 Socket Regulator Vcore Peripheral Map 32-Bit 33MHz PCI Bus 64-Bit 66MHz PCI Bus SVGA Video PCI to PCI Bridge VGA Connector CompactPCI Pe Perip riph he era rall Fr Front P ont Pa anel nel Rear Rear P Pa anel nel Co Comme mmen nt t Front Panel & Intel 69030 Intel 21154 64-Bit @ 66MHz Rear Panel BGA256 BGA304 SVGA Vid SVGA Vide eo o √ √ √ √ Ju Jum mper selectable per selectable E Et thernet 0 hernet 0 √ √ √ √ Ju Jum mper selectable per selectable 10/100 Base-TX Ethernet Connector Ultra160 SCSI E Et thernet 1 hernet 1 √ √ √ √ Ju Jum mper selectable per selectable Ethernet SCSI Connector LSI53C1000 Front Panel & Intel 82559 Rear Panel Rear Panel BGA329 PM PMC C √ √ BGA196 Ultra 160 S Ultra 160 SC CS SI I √ √ On rear I/O board as internal 68-pin connector On rear I/O board as internal 68-pin connector 10/100 Base-TX BIOS Flash Ethernet Connector Ultra IDE 0 Ultra IDE 0 √ √ A Allso av so available on-bo ailable on-board v ard viia 50-pin heade a 50-pin header r Ethernet Front Panel & 512K Socket Intel 82559 Rear Panel PLCC32 Ultra IDE 1 Ultra IDE 1 √ √ On rear I/O board as internal header connector On rear I/O board as internal header connector BGA196 X-BUS Flopp Floppy y √ √ A Allso av so available on-bo ailable on-board v ard viia 50-pin heade a 50-pin header r USB Connector Floppy Connector Front Panel & Mezzanine Header & USB 0 USB 0 √ √ PCI to ISA Bridge Rear Panel Rear Panel Micron USB 1 USB 1 √ √ Coppertail LPC BUS IDE Connector BGA352 Serial Connector S Serial P erial Po ort 0 rt 0 √ √ Mezzanine Header & Super I/O Rear Panel Rear Panel National Semi S Serial P erial Po ort 1 rt 1 √ √ PC87417 PQFP128 Serial Connector P Pr rinter P inter Port ort √ √ On rear I/O board as internal header connector On rear I/O board as internal header connector 32-Bit PMC Rear Panel Front Panel & Expansion Rear Panel Mouse Mouse √ √ √ √ S Shared with ke hared with key yboar board on single P d on single PS S/ /2 connector 2 connector K Ke ey yboard board √ √ √ √ S Shared hared with m with mouse on ouse on single single P PS S/2 /2 connector connector Parallel Connector Rear Panel System Monitor Status LEDs Lithium Watchdog Timer Speaker Header Battery Keyboard/Mouse Hot Swap Control Connector Reset Pushbutton Coin Cell IPMI Management Front & Rear Panel For Further Information Worldwide Headquarters European Headquarters France, Italy I-Bus Corporation I-Bus UK Ltd I-Bus France 3350 Scott Blvd, Building 54 Unit 6, Chichester Business Park B.P 45 Valbonne Santa Clara, CA 95054 City Fields Way, Tangmere 06901 Sophia Antipolis CEDEX United States West Sussex, PO20 2LB, UK France Phone : +1 (408) 450-7880 Tel: +44 (0) 1243 756300 Tel: +33 (0) 493 004 360 Fax : +1 (408) 450-7881 Fax: +44 (0) 1243 756301 Fax: +33 (0) 493 004 369 Toll Free: 877-777-IBUS Email: contact.uk@ibus.com Email: contact.fr@ibus.com Email: contact.us@ibus.com © I-Bus Corporation 2005. Technical information is subject to change. Actual system and component specifications may differ. Contact your local I-Bus representative for more details.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the IBC2801 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods