I-BUS Continuon™ 4U/ES
Specifications
Backplane
Integrated 6-slot CompactPCI® backplane, supports one or two-slot system master SBC, 4-5 full hot-swap I/O slots, PICMG 2.5 compliant H.110 backplane, additional slot for CMC in the rear
Chassis
4U Height, 7" x 17" x 17.25" (hwd)/ 178 x 432 x 438 mm
Drive Expansion
Up to 180Gbyte 5 SCA drive array, 38X CD-ROM, optional 40GB DAT or RAID Controller
Humidity
5% to 85% @40ºC (non-condensing)
Shock
2.5G @10ms
Supported SBCs
CP2040, CP2060, CP2080, CP1500
Temperature
0 to 40C
Thermal Management
40CFM hot-swap blower cooling for card and drive areas, Dual 25CFM Integrated power supply fans
Vibration
0.25G @5-100Hz
Features
- 18GB SCA SCSI HDD
- 512MB ECC SDRAM
- C0406A NEBS Compliant Platform
- CP20x0 SBC & Rear I/O
- Dual 300W AC Power Module
- Dual US Power Cords
- SCSI 36X CD-ROM
- Solaris 8 CD 6 Installed
- Sparc Processor
Datasheet
IBUS-Continuon 4U ES-platform-datasheet1-438934262.pdf
542 KiB
Extracted Text
THE PRODUCT LINE www.ibus.com Continuon™ 4U/ES ® 4U CompactPCI SPARC Netra™ Blade NEBS Compliant Platform Ordering Information Specifications Chassis Thermal Management Continuon™ 4U/ES • 4U Height • 40CFM hot-swap blower cooling for card and Standard Configuration • C0406A NEBS Compliant Platform • 7" x 17" x 17.25" (hwd)/ 178 x 432 x 438 mm drive areas • CP20x0 SBC & Rear I/O • Dual 25CFM Integrated power supply fans TM • Sparc Processor Sun Netra CP 2060 SBC TM • 512MB ECC SDRAM • 500MHz Ultra SPARC IIe 64-bit processor Power Subsystem • Dual 300W AC Power Module • Solaris 8 CD 6 Operating System • Dual 300W Hot-swap N+1 power supplies • Dual US Power Cords • Integrated 4-way 256KB L2 cache • Dual feed power inputs • SCSI 36X CD-ROM • 512MB soldered on board ECC RAM • Input voltages: 90-132/180-250 VAC • 18GB SCA SCSI HDD • 1MB on-board boot flash, 4MB user • Optional -48VDC input supplies • Solaris 8 CD 6 Installed programmable flash memory • Output Power: +3.3V@22A, +5V@30A, • Product Manuals • Sun Microcontroller, IPMI interface +12V@11A, -12V@1A • One PMC 32 bit 33MHz available • Combined total output of +3.3V and +5V Options (Alternatives to standard configuration • Two RS-232C asynchronous serial ports not to exceed 160W above unless otherwise stated) • Two USB ports • Optional UK, European or IEC to IEC power • Additional CP2040 Computing Blades • Two 10/100 Mb/sec. Ethernet Interfaces cables • Additional CP2060 Computing Blades • Ultra-2 SCSI PMC with Rear I/O • Additional CP2080 Computing Blades Operating Environment • 1-Slot (4HP) x 6U CompactPCI Compliant • Additional CP1500 Computing Blades • Temperature: 0º to 40º C • CompactPCI Compliant Rear I/O Board • Humidity: 5% to 85% @40ºC (non-condensing) • 36GB SCA SCSI Drives • Shock: 2.5G @10ms Supported SBCs • 3.5" RAID Controller • Vibration: 0.25G @5-100Hz CP2040, CP2060, CP2080, CP1500 • 3.5" 40GB DAT Drive Standards Compliance Backplane • 4-port 10/100 Ethernet Interface • PICMG 2.0 R 3.0, PICMG 2.1 R2.0, • 8-port 10/100 Ethernet Interface • Integrated 6-slot CompactPCI® backplane PICMG 2.5 R1.0, PICMG 2.9 R1.0, • 24+2 Layer 3 Switch • Supports one or two-slot system master SBC PICMG 2.10 R1.0, PICMG 2.11 R1.0 • 4-5 full hot-swap I/O slots • IBC-2501 Chassis Management • ESD: CE • PICMG 2.5 compliant H.110 backplane Controller, IPMI v.1.0 compliant Module. • EMI: CE, FCC, UL/CUL • Additional slot for CMC in the rear • Safety: UL/CUL,CE,CB • Dual 300W -48VDC Power Supplies Drive Expansion • UK, European or IEC Power Cords • Up to 180Gbyte 5 SCA drive array • 38X CD-ROM • Optional 40GB DAT or RAID Controller 01-20-05 Rev. G www.ibus.com Continuon™ 4U/ES ® 4U CompactPCI SPARC Netra™ Blade NEBS Compliant Platform The Continuon™ 4U/ES CompactPCI ™ platform employs key features to meet the high availability requirements of the communication, network and server marketplace. Its unique design combines the performance through a SPARC Netra™ Blade with the high serviceability achieved with the Hard drives and power supplies redundancy. The Continuon™ 4U/ES system platform supports full I/O hot swap compliant with PICMG 2.1 R2.0, a 5 SCA hot-swap SCSI disk array, a hot swap blower cooling design, and dual redundant hot swap power supplies. As an option, it is equipped with a PICMG 2.9 compliant Chassis Management Controller (CMC) monitoring chassis temperature, power supply status, and voltages on the backplane. The CMC board occupies a dedicated slot above the rear I/O transition slots, with status LEDs visible on the chassis front panel. The Continuon™ 4U/ES platform suites ideally for applications requiring small rack space, true multi-system clustering with high capacity data storage. A maximum performance achieved in 4U height offering significant ongoing cost benefits for any application. For Further Information Worldwide Headquarters European Headquarters France, Italy I-Bus Corporation I-Bus UK Ltd I-Bus France 3350 Scott Blvd, Building 54 Unit 6, Chichester Business Park B.P 45 Valbonne Santa Clara, CA 95054 City Fields Way, Tangmere 06901 Sophia Antipolis CEDEX United States West Sussex, PO20 2LB, UK France Phone : +1 (408) 450-7880 Tel: +44 (0) 1243 756300 Tel: +33 (0) 493 004 360 Fax : +1 (408) 450-7881 Fax: +44 (0) 1243 756301 Fax: +33 (0) 493 004 369 Toll Free: 877-777-IBUS Email: contact.uk@ibus.com Email: contact.fr@ibus.com Email: contact.us@ibus.com © I-Bus Corporation 2005. Technical information is subject to change. Actual system and component specifications may differ. Contact your local I-Bus representative for more details.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the Continuon™ 4U/ES have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods