� SUHNER DATA LINE PROTECTOR DATA SHEET TYPE 3414.99.0001 Article number: 23033695 Rev: a Description Data Line protector Hybrid Protector Shield and Ground separated Cat 5e specified Product Configuration Connectors RJ45 jack (female) Mounting and grounding MH154, screw M4, grounding cable Technical Data Impedance: 100 Ω Frequency range DC to 100 MHz Insertion loss ≤ 0.5 dB Voltage rating: per Pair ± 6 V max. Current rating per Pair 1.5 A max. Current handling capability IEC 61000-4-5: Shield – Ground 6 kA Line – Ground 2.5 kA Line – Line 100 A Related protection levels IEC 61000-4-5: Shield – Ground 700 V Line – Ground 700 V Line – Line 20 V Clamping voltage Shield – Ground 90 V Line – Ground 90 V Line – Line 15 V Response time 2 ns Operating temperature -40°C to + 85°C Waterproof degree IP20 (according to IEC 60529, data refer to the coupled state) WAIVER! While the information contained in this folder has been carefully compiled to the best of our present knowledge, it is not intended as representation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be constructed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists. HUBER+SUHNER AG All product data is not binding and subject to change at any time. The products of HUBER + SUHNER are tested in a laboratory environment against specific standards and test procedures. Any guarantee for specific Protection+Federline Components applications or environmental conditions requires a separate written agreement. CH-9100 Herisau Phone +41 (0)71 353 41 11 Issued: 20.5.2003 09:18 Fax +41 (0)71 353 47 51 www.hubersuhner.com uncontrolled copy Page 1 � SUHNER DATA LINE PROTECTOR DATA SHEET Piece Parts Material Surface Plating Housing Aluminum alloy AIMgSi 0.5 chromatized Remarks: - Each pair protected with gas capsules and TVS diodes (all 8 Pins of the RJ45 connector protected) - Grounding screws included - Application with shielded or unshielded twisted pair cables possible (RJ45 shields are connected) - For proper function the Protector has to be connected to ground via housing or shield Circuit diagram Attachment Outline drawing 23034007 Related Documents Mounting/ Grounding instruction 84000057 WAIVER! While the information contained in this folder has been carefully compiled to the best of our present knowledge, it is not intended as representation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be constructed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists. HUBER+SUHNER AG All product data is not binding and subject to change at any time. The products of HUBER + SUHNER are tested in a laboratory environment against specific standards and test procedures. Any guarantee for specific Protection+Federline Components applications or environmental conditions requires a separate written agreement. CH-9100 Herisau Phone +41 (0)71 353 41 11 Issued: 20.5.2003 09:18 Fax +41 (0)71 353 47 51 www.hubersuhner.com uncontrolled copy Page 2