HUBBELL MT9BC10

RACEWAY SYSTEMS HUBBELL PREMISE WIRING MT9 - Non-Metallic Surface Raceway 3-Channel, 2-Piece Design Large Cable Runs for High-Density, Communications 40% Wirefill = 59; Cat 5e UTP @ .215” Dia. FEATURES Q Three channel design separates power and low- voltage, tamper-resistant Q Corner fittings at 1.25” - minimum exceeding bend radius requirements Q Available in 5’ or 10’ lengths Q Neutral office white color Q Paintable with oil base stains or latex paint Q Lightweight, easy to handle/cut, non-metallic, non-conductive Q Will not scratch, dent, chip, or rust MediaTrak™ 9 is Hubbell Premise Wiring's second largest, three-channel race- way system. It is very suitable where larger cable runs are needed for high den- SPECIFICATIONS sity communications and power outlets. This divided channel raceway allows the X Material: U.V. Stabilized PVC simultaneous presence of data, voice, video, fiber and power cable bundles in the pathway. X U.L. Rated for use up to 600 Volts X Flammability: UL 94-V-0 Self-extinguishing. Primary Connections are made through full capacity boxes that take standard single source required for combustion gang plates. These boxes maintain a traditional vertical orientation when the X Listings: raceway is horizontal. Additional 1- and 2-gang inline boxes are offered. - UL Listed E143298 (300 lbs. crush resistance and Important features also include 1.25" minimum bend radius corners, wire clips 5 ft./lbs. impact resistance) that fit under the cover, a cover design that is highly tamper resistant and electri- - UL E143309/conforms to NEC352B - CSA certified LR87514 cal use up to 600 Volts. MediaTrak 9 is the smart choice when dealing with X Operating temperature range: larger cable bundles and higher outlet densities. -25°F to 158°F MT9 WIRE FILL CAPACITIES Power Circuits (with or without Telephone Data Data Data Data standard devices in an Inline box) (Copper Products) (Fiber Optics) (Fiber Optic Jumpers) (Fiber Optic Zip Cord) 62.5/125um 62.5/125um 62.5/125um (THHN/T90 Nylon) 4-Pair 25-Pair Type RG59U Category 5e Category 6 Multimode Multimode Multimode O.D. (0.105) (0.122) (0.153) (.190) (.500) (.242) (.215) (.250) (.190) (.118) (.12x.26) Channel 14AWG 12AWG 10AWG 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% A+B+C 60** 36** 45** 77 117 10 16 47 71 59 90 44 68 77 117 203 306 92 137 A or C 42* 30* 28* 25 38 3 5 15 23 19 29 14 22 25 38 66 99 30 44 B 42* 30* 28* 27 41 4 6 17 25 21 32 16 24 27 41 71 108 32 49 * Maximum power capacity in single channel ONLY. ** Total power wiring capacity can not exceed number specified in A+B+C. NOTE: 40% capacity is the initial maximum recommended by EIA/TIA-569-A for designing communication cabling systems. 60% fill allowed for additions and approaches maximum fill. All communication wiring capacities should be derated proportionally to the amount the installed connectors restrict the cross-sectional area of the raceway. ORDER INFORMATION MediaTrak 9 Dimensions Description Catalog No. MediaTrak 9 - 5’ length MT9BC5 MediaTrak 9 - 10’ length MT9BC10 5.57 sq. in. www.hubbell-premise.com ORDER INFORMATION - MT9 Fittings and Surface Boxes Description Catalog No. Dimensions (inches)AB C Flat Elbow, MT9FEC 1.71 7.64 7.64 cover only Flat Elbow, MT9FEBC base and cover Internal Elbow, MT9IEC 4.36 4.72 4.36 cover only Internal Elbow, MT9IEBC base and cover External Elbow, MT9EEC 4.72 6.48 6.48 cover only External Elbow, MT9EEBC base and cover Tee, base and MT9TCBC 7.08 2.72 6.37 cover Splice Cover MT9SC 1.56 4.74 1.69 End Cap MT9EC 1.50 4.68 1.72 Conduit Adapter/ MT9CACF 5.22 6.30 4.72 Ceiling fitting Knockouts - End & Base: 6, ½” thru 1½” Reducer MT986RED 4.72 1.73 3.50 (MT9 to MT6 and MT8) Surface Panel MT9SPC 2.22 1.60 5.66 Connector (2 thru holes 0.18” dia.) Security Strap MT9SS 1.50 1.74 6.01 (Thru-hole 0.19” dia.) Wire Clip MT9WC 1.60 1.00 1.34 Transition Fitting MT9876TBC 2.72 2.42 7.25 (MT9 to MT8, MT7, MT6) Device Boxes 1-Gang Inline* MT9INDB1 4.74 2.02 7.70 2-Gang Inline* MT9INDB2 4.75 3.22 7.00 1-Gang Full** MT9FCIB1 4.80 3.17 4.38 2-Gang Full** MT9FCIB2 4.80 3.17 7.20 3-Gang Full** MT9FCIB3 4.80 3.17 9.96 * 1-gang MTP Plates only ** 1-gang MTP or IFP Plates Hubbell Premise Wiring HUBBELL INCORPORATED (Delaware) 14 Lord’s Hill Road • Stonington, CT 06378-0901 • (860) 535-8326 • 800-626-0005 Fax: (860) 535-8328 • Internet site: http://www.hubbell-premise.com DS-D16 11/02 Worldwide Locations Hubbell Premise Wiring, Asia Pacific 852-2836-7131 Fax: 852-2836-7132 Hubbell de Mexico, S.A. de C.V. 52-5-559-5304 Fax: 52-5-559-5885 Hubbell Canada Inc. 905-839-1138 Fax: 905-839-9108 Hubbell Premise Wiring, Middle East 971-4-393-4192 Fax: 971-4-393-4194 Hubbell Premise Wiring, China 8621-6309-0119 Fax: 8621-6309-0122 Hubbell Premise Wiring, Puerto Rico 787-720-7185 Fax: 787-789-2796 Hubbell Premise Wiring, Europe 44-(0)1234-848550 Fax: 44-(0)1234-856190 Hubbell-Taian Co., Ltd., Taiwan 886-2-(0)2515-0855 Fax: 886-2-(0)2515-0899 Hubbell Int’l. Inc., Korea Branch 82-2-(0)2607-1363 Fax: 82-2-(0)2603-7386 Hubbell Incorporated, Turkey 90-216-414-8147 Fax: 90-216-414-8148 Hubbell Premise Wiring, Latin America 305-251-4236 Fax: 305-251-4087 Hubbell Premise Wiring, Venezuela 58-16-6807453 Fax: 58-281-2820323