HP J9151A
Description
HP J9151A HP X132 10G SFP+ LC LR Transceiver
Part Number
J9151A
Price
Request Quote
Manufacturer
HP
Lead Time
Request Quote
Category
PRODUCTS - J
Datasheet
HP-J9151A-HPx132-10G-SFP-LC-LR-Transceiver-235755194.pdf
96 KiB
Extracted Text
QuickSpecs HP SFP+ Transceivers (SR, LRM, LR and ER) Overview Models HP X132 10G SFP+ LC SR Transceiver J9150A HP X132 10G SFP+ LC LR Transceiver J9151A HP X132 10G SFP+ LC LRM Transceiver J9152A HP X132 10G SFP+ LC ER Transceiver J9153A DA - 13285 North America — Version 3 — September 5, 2012 Page 1 QuickSpecs HP SFP+ Transceivers (SR, LRM, LR and ER) Technical Specifications HP X132 10G SFP+ LC SR Ports 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only Transceiver (J9150A) Connectivity Connector type LC Wavelength 850 nm A 10-Gigabit transceiver in Physical characteristics Dimensions 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 SFP+ form-factor that cm) supports the 10-Gigabit SR standard, providing 10- Weight 0.04 lb. (0.02 kg) Gigabit connectivity up to Transceiver form factor SFP+ 300 m on multimode fiber. Environment Operating temperature 32°F to 158°F (0°C to 70°C) Operating relative 0% to 85%, noncondensing humidity Nonoperating/Storage -40°F to 185°F (-40°C to 85°C) temperature Altitude up to 10,000 ft. (3 km) Electrical characteristics Power consumption 0.6 W typical Power consumption 0.8 W maximum Cabling Cable type: 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance: 2-26m with 62.5 µm multimode cable @ 160 MHz*km 2-33m with 62.5 µm multimode cable @ 200 MHz*km 2-66m with 50 µm multimode cable @ 400 MHz*km 2-82m with 50 µm multimode cable @ 500 MHz*km 2-300m with 50 µm multimode cable @ 2000 MHz*km Cable length 2-300m Fiber type Multi Mode Notes For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended. Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. DA - 13285 North America — Version 3 — September 5, 2012 Page 2 QuickSpecs HP SFP+ Transceivers (SR, LRM, LR and ER) Technical Specifications HP X132 10G SFP+ LC LR Ports 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only Transceiver (J9151A) Connectivity Connector type LC Wavelength 1310 nm A 10-Gigabit transceiver in Physical characteristics Dimensions 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 SFP+ form-factor that cm) supports the 10-Gigabit LR standard, providing 10- Weight 0.04 lb. (.02 kg) Gigabit connectivity up to Transceiver form factor SFP+ 10 km on single-mode Environment Operating temperature 32°F to 158°F (0°C to 70°C) fiber. Operating relative 0% to 85%, noncondensing humidity Nonoperating/Storage -40°F to 185°F (-40°C to 85°C) temperature Altitude up to 10,000 ft. (3 km) Electrical characteristics Power consumption 0.9 W typical Power consumption 1 W maximum Cabling Cable type: Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1; Maximum distance: 2m-10km with 9/125 µm single-mode cable Cable length 2m to 10km Fiber type Single Mode Notes Conditioning patch cord cables are not supported. For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended. Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. DA - 13285 North America — Version 3 — September 5, 2012 Page 3 QuickSpecs HP SFP+ Transceivers (SR, LRM, LR and ER) Technical Specifications HP X132 10G SFP+ LC LRM Ports 1 LC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only Transceiver (J9152A) Connectivity Connector type LC Wavelength 1310 nm A 10-Gigabit transceiver in Physical characteristics Dimensions 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 SFP+ form-factor that cm) supports the 10-Gigabit LRM standard, for 10- Weight 0.04 lb. (.02 kg) Gigabit connectivity up to Transceiver form factor SFP+ 220 m on legacy Environment Operating temperature 32°F to 158°F (0°C to 70°C) multimode fiber. Operating relative 0% to 85%, noncondensing humidity Nonoperating/Storage -40°F to 185°F (-40°C to 85°C) temperature Altitude up to 10,000 ft. (3 km) Electrical characteristics Power consumption 0.7 W typical Power consumption 1 W maximum Cabling Cable type: 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations); Maximum distance: 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km Cable length 0.5m to 220m Fiber type Multi Mode Notes For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode- conditioning patch cords to achieve the maximum distances listed above. For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended. Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. DA - 13285 North America — Version 3 — September 5, 2012 Page 4 QuickSpecs HP SFP+ Transceivers (SR, LRM, LR and ER) Technical Specifications HP X132 10G SFP+ LC ER Ports 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only Transceiver (J9153A) Connectivity Connector type LC Wavelength 1550 nm The SFP+ ER Transceiver Physical characteristics Dimensions 2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19 will transmit 10Gbps over cm) up to 40km using standard OM3 fiber cable. This Weight .04 lb., Fully loaded product expands the HP Transceiver form factor SFP+ Networking transceiver Environment Operating temperature 32°F to 158°F (0°C to 70°C) portfolio for connections from 0m to 40km. Use only Operating relative 5% to 95%, noncondensing genuine HP transceivers humidity with your HP Networking Nonoperating/Storage -40°F to 185°F (-40°C to 85°C) equipment to ensure temperature reliability and support. Nonoperating/Storage 5% to 95%, noncondensing relative humidity Altitude up to 10,000 ft. (3 km) Electrical characteristics Power consumption 1.3 W typical Power consumption 1.5 W maximum Cabling Cable type: Single-mode fiber optic, complying with ITU-T G.652; Maximum distance: 40km Fiber type Single Mode Notes Check switch release notes for minimum version of software required to support this transceiver. Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details. Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. To learn more, visit: www.hp.com/networking © Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA - 13285 North America — Version 3 — September 5, 2012 Page 5
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the J9151A have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods