HITACHI IC35L120AVVA07-0
Specifications
Capacity (GB)
120/80/60/40
Data buffer
2MB
Data disks
3/2/2/1
Data heads (physical)
6/4/3/2
Depth (mm)
146
Error rate (non-recoverable)
1 in 1013
Height (mm)
25.4
Interface
ATA-100
Interface transfer rate (max. MB/sec
100
Latency average (ms
4.17
Max. areal density (Gbits/sq. inch)
29.7
Max. recording density (KBPI)
524/547
Media transfer rate (max. Mbits/sec)
592
Non-operating Ambient temperature
-40° to 65°C
Non-operating Max. wet bulb (non-condensing)
35°C
Non-operating Relative humidity (non-condensing)
5% to 95%
Non-operating Shock (half sine wave, 2ms)
400G (1 or 2 disks); 350G (3 disks)
Non-operating Vibration (random (RMS))
1.04G rms (XYZ)
Operating Ambient temperature
5° to 55° C
Operating Max. wet bulb (non-condensing)
29.4°C
Operating Relative humidity (non-condensing)
8% to 90%
Operating Shock (half sine wave, 2ms)
55G
Operating Vibration (random (RMS))
0.67G for horizontal;0.56G for vertical
Recording zones
31
Requirement
+5 VDC (+/- 5%), +12 VDC (+10%/-8%)
Rotational speed (rpm)
7,200
Sector size (bytes)
512
Start/stops (at 40° C)
40K
Sustained data rate (MB/sec)
48 to 23 (Zones 0-30)
Track density (KTPI)
56.7/4
Weight (max. g)
640
Width (mm)
101.6
Features
- Advanced buffer management bursts data to the system at up to 100MB/sec
- Antiferromagnetically coupled (AFC) media enables higher capacities per square inch of data surface
- Capacities range from up to 40GB to 120GB
- Enhanced servo system provides reliable head positioning
- Glass disks provide smoother media for the ever-shrinking bit size
- IBM-designed onboard processor provides faster speeds than the previous generation
- Increases disk capacity by 100 percent over previous generation
- Industry-leading low power
- Meets PC Design Checklist for Windows XP
- Provides industry-leading performance at 7,200rpm, 592Mbits/sec internal transfer rate, and 8.5ms average seek time
- Sustained data rate of up to 48MB/sec
- Thermal monitor helps provide accurate data writes and reads over the full system temperature range
- Three-disk design provides leading 120GB capacity at 7,200rpm
Datasheet
Extracted Text
Capacity and performance leadership with proven quality ™ IBM Deskstar 120GXP hard disk drives The Deskstar 120GXP incorporates and better reliability. The superior areal both new and proven technologies density combines with the faster pro- to boost system performance. This cessor and streamlined cache buffer drive provides the capacity and per- to enable award-winning performance formance to handle a wide range of for both the Deskstar and your system. advanced desktop and audio/video Enhancements to the servo system and applications. Additionally, features such thermal monitor help to enable accu- as low acoustics, low power, and rate data storage and retrieval. Tagged Command Queuing make this Deskstar 120GXP matches the drive drive ideal for non-PC, high perfor- capacity and performance guidelines mance, special applications. ® ® Highlights for Microsoft Windows XP—40GB minimum and 7,200rpm. Technology for capacity and � Provides industry-leading performance performance at 7,200rpm, Technology for reliability Antiferromagnetically coupled (AFC) • 592Mbits/sec internal transfer Load/unload head ramps • media enables higher capacities per rate, and 8.5ms average seek Glass media • square inch of data surface. time. These combine to enable Ceramic spindle motor bearings • Glass disks provide smoother media for • leading sustained data rate of up Differential read channel • the ever-shrinking bit size. to 48MB/sec Internal thermal monitor • Three-disk design provides leading • Drive Fitness Test (DFT) • 120GB capacity at 7,200rpm. � Capacities range from up to S.M.A.R.T Self Test • IBM-designed onboard processor pro- 40GB to 120GB. This increases • vides faster speeds than the previous disk capacity by 100 percent over These combined technologies enable previous generation generation. popular capacity points and are also Advanced buffer management bursts • designed to increase reliability. Deskstar � Thermal monitor helps provide data to the system at up to 100MB/sec. drives continue to utilize proven IBM accurate data writes and reads Enhanced servo system provides • over the full system tempera- technology such as TrueTrack servo and reliable head positioning. ture range No-ID sector formatting AFC and glass disk technologies � Meets PC Design Checklist for . enable increased areal density. Thus, ® Windows XP the Deskstar provides the necessary capacities using fewer heads and � Industry-leading low power disks, which means fewer components For more information IBM Deskstar 120GXP at a glance Internet and e-mail: Product name Deskstar 120GXP Deskstar 120GXP ibm.com/harddrive • Model names IC35L120AVVA07-0 IC35L040AVVN07-0 drive@us.ibm.com • IC35L080AVVA07-0 IC35L020AVVN07-0 IC35L060AVVA07-0 IC35L040AVVA07-0 IBM hard drive product information: Configuration 1-888-IBM-5214 • Interface ATA-100 ATA-100 507-286-5825 • Capacity (GB) 120/80/60/40 40/20 Sector size (bytes) 512 512 Recording zones 31 31 Data heads (physical) 6/4/3/2 2/1 Data disks 3/2/2/1 1/1 Max. areal density (Gbits/sq. inch) 29.7 29.7 Max. recording density (KBPI) 524/547 524/547 Track density (KTPI) 56.7/54 56.7/54 Performance 4 Data buffer 2MB 2MB Rotational speed (rpm) 7,200 7,200 Latency average (ms) 4.17 4.17 Media transfer rate (max. Mbits/sec) 592 592 Interface transfer rate (max. MB/sec) 100 100 Sustained data rate (MB/sec) 48 to 23 (Zones 0-30) 47.5 to 22.9 (Zones 0-30) 3 Seek time (read, typical) Average (ms) 8.5 8.8 Track to track (ms) 1.1 1.1 Full track (ms) 15 16 Reliability 13 13 Error rate (non-recoverable) 1 in 10 1 in 10 Start/stops (at 40° C) 40K 40K Acoustic Idle (Bels) 3.0 (1 disk) 3.1 3.0 (2 disks) 3.1 (3 disks) © International Business Machines Corporation 2002 Power IBM Storage Technology Division 5600 Cottle Road Requirement +5 VDC (+/- 5%), +12 VDC (+10%/-8%) +5 VDC (+/- 5%), +12 VDC (+10%/-8%) San Jose, CA 95193 Dissipation Produced in the United States Startup current (max. A) 2.0 (+12V) & 0.74 (+5V) 2.0 (+12V) & 0.74 (+5V) 4/02 Idle (W) 6.2 (3 disks) 4.9 All rights reserved IBM is a registered trademark and Deskstar is a trade- Height (mm) 25.4 25.4 mark of International Business Machines Corporation. Width (mm) 101.6 101.6 Microsoft, Windows NT, and Windows are trademarks Depth (mm) 146 146 Weight (max. g) 640 640 of Microsoft Corporation in the United States, other countries, or both. Environmental characteristics Other names are trademarks or registered trade- Operating marks of their respective owners. Ambient temperature 5° to 55° C 5° to 55° C Product description data represents design objec- Relative humidity (non-condensing) 8% to 90% 8% to 90% Max. wet bulb (non-condensing) 29.4° C 29.4° C tives and is provided for comparative purposes; Shock (half sine wave, 2ms) 55G 55G actual results may vary depending on a variety of Vibration (random (RMS)) 0.67G for horizontal 0.67G for horizontal factors. Product claims are true as of the date of first 0.56G for vertical 0.56G for vertical printing. Data is subject to change without notice. IBM development plans are subject to change at Non-operating Ambient temperature -40° to 65° C -40° to 65° C any time without prior notice. Reference in this pub- Relative humidity (non-condensing) 5% to 95% 5% to 95% lication to IBM products, programs, or services do Max. wet bulb (non-condensing) 35° C 35° C not imply that IBM intends to make them available in Shock (half sine wave, 2ms) 400G (1 or 2 disks); 350G (3 disks) 350G all countries in which IBM operates. Vibration (random (RMS)) 1.04G rms (XYZ) 1.04G rms (XYZ) 1 This product data does not constitute a warranty. Questions regarding IBM warranty terms or the methodology used to derive this data should be referred to an IBM representative. 2 GB equals one billion bytes when referring to hard drive capacity; accessible capacity may be less. 3 Includes command overhead. 4 Upper 184.5 KB used for drive firmware. G225-7005-01
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the IC35L120AVVA07-0 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods