Manufacturers
HIROSE ELECTRIC U.FL-2LP(V)-04N1-A-(500)
Description
CABLE ASSEM UFL-UFL 500MM 0.81
Part Number
U.FL-2LP(V)-04N1-A-(500)
Price
Request Quote
Manufacturer
HIROSE ELECTRIC
Lead Time
Request Quote
Category
PRODUCTS - U
Datasheet
Extracted Text
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
U.FL Series
Up to 6GHz Transmission Speed
Mated Height Comparison
(With E.FL series)
E.FL-LP-040
U.FL-LP-040
E.FL-LP-066
U.FL-LP-066
U.FL-LP(V)-040
U.FL E.FL
Space Factor of Mated ConnectorFeatures
1.Extremely Small Occupied Mounting Area
2
Reduced board space requirement by 18% to 7.7mm , when
Cable
compared with Hirose’s E.FL connectors.
U.FL-LP-040
Plug
2.Light Weight
Dia.0.81
One of the world’s lightest coaxial connectors.
Receptacle: 15.7mg
U.FL-R-SMT
3.Frequencies of Up to 6GHz
Receptacle
To meet the frequency requirements of a wide variety of
miniature equipment, these connectors offer high frequency
Cable
U.FL-LP-066
Plug
performance from DC to 6 GHz.
Dia.1.32
4.Board Placement with Automatic Equipment
Dia.1.13
Supplied on tape-and-reel packaging.
U.FL-R-SMT
5.Use of Ultra-fine Teflon Cable
Receptacle
®
Several of ultra-fine single and double shielded Teflon
NEW
coaxial cables terminate to U.FL plug.
Cable
U.FL-LP(V)-040
Plug
6. Simple Disconnection
Dia.0.81
Dedicated tool allows reliable un-mating of the plug.
7.User Friendly Mating Operation
U.FL-R-SMT
Tactile lock feeling ensures and confirms reliable connection.
Receptacle
NEW
CableApplications
U.FL-LP-062
Plug
Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,
Dia.1.00
electronic measuring instruments, etc.
U.FL-R-SMT
Receptacle
NEW
Cable
U.FL-LP-088
Plug
Dia.1.37
U.FL-R-SMT
Receptacle
*Teflon is a registered trademark of DuPont.
2004.2
1
1.9(2.0Max)
2.5Max
2.4Max 2.4Max 2.0Max 2.5Max
2.4(2.5Max)
3(3.2Max)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Product Specifications
Nominal characteristic impedance 50 ohms
Operating temperature range -40˚C to +90˚C
Ratings Voltage rating 60 V AC (rms)
Operating humidity 90% max.
Frequency range DC to 6 GHz
Item Specification Conditions
1. Contact resistance Center: 20 m ohms max.
10 mA max.
Outside: 10 m ohms max.
2. Insulation resistance 500 M ohms min.
100 V DC
3. Withstanding voltage No flashover or insulation breakdown. 200 V AC / 1 minute
4. V.S.W.R.* Part No. Up to 3GHz 3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max
U.FL-LP-068 dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max
U.FL-LP-062 dia.1mm Coaxial Cable Assembly 1.3 Max 1.3 Max
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly 1.3 Max 1.4 Max
5. Center contact holding force 0.15 N min. Measured with a Ø 0.475 pin gauge
6. Durability Contact resistance
(mating/un-mating, Center: 25 m ohms max. 30 cycles
with corresponding plug) Outside: 15 m ohms max.
7. Vibration Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration
2
No electrical discontinuity of 1µs min. of 59m/s , for 5 cycles in the direction of each of the 3 axis.
2
8. Shock No damage, cracks or parts dislocation. Acceleration of 735 m/s , 11ms duration, sine half-wave
waveform, 6 cycles in each of 3 axes.
9. Humidity No damage, cracks or parts dislocation.
(Steady state) Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40ç and humidity of 95%.
Insulation resistance 500 M ohms min.(when dry)
10. Temperature cycle No damage, cracks or parts dislocation. Temperature:-40˚C +5 to +35˚C +90˚C +5 to +35˚C
/ / /
Contact resistance:25 m ohms max. (Center) Time: 30 5 max. 30 5 max.(Minutes)
/ / /
15 m ohms max. (Outside) 5 cycles
11. Salt spray test No excessive corrosion 5% salt water solution, 48 hours
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement connection shown below.
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
Material/Finishes
Part Material Finish Remarks
Shell
Phosphor bronze Silver plated —————
Male center contact Brass Gold plated —————
Female center contact Phosphor bronze Gold plated —————
Plug PBT Color: Black UL94V-0
Insulator
Receptacle LCP Color: Beige UL94V-0
2
+0.1
Ø1.5
0
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Receptacles
Cut Out Prohibition Area
4±0.05
GND GND
1.9±0.05
SIG
GND
Ø2
GND
3
SIG
2.6
Note 1: Receptacles of (01) specification are sold by the
0.6
1±0.05
bag with 100 pieces per bag.
Please order in pack units.
Note 2: Receptacles of (10) specification are sold by the
reel (which contains 2,500 pieces).
Recommended PCB mounting pattern
Please order in reel units.
Note 3: This area may be covered by insulating material.
Part No. CL No. Packaging Weight (mg)
U.FL-R-SMT(01) 331-0471-0-01 Bag packaging (100 pieces/bag)
15.7/unit
U.FL-R-SMT(10) 331-0471-0-10 Reel packaging (2500 pieces/reel)
Packaging Specifications
Embossed Carrier Tape Dimensions
2±0.1 4±0.1 0.3
Center contact
Unreeling direction 1.6
8±0.1
Reel Dimensions
1.8 14
3
Ø21
Ø13
12±0.3
5.5±0.1
1.75±0.1
(3.1)
2.6 1.25
0.35
1.8
1.2Max(Note 3)
Ø330±2
1±0.05
1.05±0.05
2.2±0.05
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Cable Assembly (Plug)
U.FL-LP-040 U.FL-LP-066 U.FL-LP(V)-040 U.FL-LP-062 U.FL-LP-088
Part No.
4
3.4 5
4
4
2.5mm Max. 2.5mm Max. 2.0mm Max. 2.4mm Max. 2.4mm Max.
Mated Height
(2.4mm Nom.) (2.4mm Nom.) (1.9mm Nom.) (2.3mm Nom.) (2.3mm Nom.)
Dia. 1.13mm and
Applicable Dia. 0.81mm Dia. 0.81mm Dia. 1mm Dia. 1.37mm
Dia. 1.32mm
cable Coaxial cable Coaxial cable Coaxial cable Coaxial cable
Coaxial cable
Weight (mg) 53.7 59.1 34.8 45.5 71.7
Cable Guide
Cable Specification
Cable
Description Inner Dielectric Outer Jacket Nominal Nominal attenuation
Type
* *
Conductor Diameter Conductor Diameter Impedance
At 3GHz At 6GHz
Dia.0.81mm 7/0.05 SA Dia.0.40 Single Dia.0.81
04 50 ohms 6.45dB/m 9.42dB/m
Coaxial Cable (AWG36) PFA Shield SA PFA
Dia.1.13mm 7/0.08 SA Dia.0.68 Single Dia.1.13 3.43dB/m 5.13dB/m
068 50 ohms
Coaxial Cable (AWG32) FEP Shield SA[TA] FEP [3.73dB/m] [5.44dB/m]
Dia.1.32mm 7/0.08 SA Dia.0.66 Double Dia.1.32
066 50 ohms 3.8dB/m 5.6dB/m
Coaxial Cable (AWG32) FEP Shield TA FEP
Dia.1mm 7/0.071 SA Dia.0.62 Tape, single Dia.1
062 50 ohms 3.1dB/m 4.4dB/m
Coaxial Cable (AWG33) FEP Shield TAT FEP
Dia.1.37mm 7/0.102 SA Dia.0.88 Single Dia.1.37
088 50 ohms 2.8dB/m 4.3dB/m
Coaxial Cable (AWG30) FEP Shield TA FEP
(data as provided by cable suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin
4
1.93 3
1.93 3
1.5 2.8
1.8 2.8
1.85
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
How to Specify Plug Cable Assembly
Dimensions of U.FL Series assembly products should be made as indicated below.
Double-Ended Cable Assembly Single-Ended Cable Assembly
L L
Total Standard Tolerance for Total Length of Cable AssemblyOrdering Information
Total Length(mm) Standard Tolerance (mm)
U.FL - [] LP - [] - A - (L)
< <
00350 L 00200 ±04
= =
1 2 3 4
<
02000
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the U.FL-2LP(V)-04N1-A-(500) have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods