The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2mm Pitch Miniature Connector A3 • A4 Series ■Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The crimping case is structured in the 2mm pitch grid, so that connectors can be arranged for use. 2. Variation in Number of Contacts In addition to the dip type, SMT and crimping types are available with broad variations. 3. Stacking Variation When the connector is used for board to board, set 6mm between boards in conjunction with the pin header A3B, or 5.1mm between boards in conjunction with the pin header A3C. ■Product Specifications Current rating 1A Operating Temperature Range –55 to +85ç (Note 1) Storage Temperature Range –10 to +60ç (Note 2) Rating Voltage rating 200V AC Operating Moisture Range 40 to 80% Storage Humidity Range 40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage 650V AC/1 minute No flashover or insulation breakdown. 3. Contact Resistance 15m ohms max 0.1A 4. Vibration No electrical discontinuity of 10μs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Insulation resistance: 1000M ohms min. Humidity (Steady state) 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Humidity resistance (–65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max. No damage, cracks, or parts looseness. (125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles (Steady state) 7. Operating Life Contact resistance: 20m ohms max. 100 cycles Solder bath: 260ç for 10 seconds 8. Resistance to No deformation of components affecting performance. Manual soldering: DIP: 350ç for 3 seconds Soldering heat SMT: 360ç for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Applications VTR, vehicle telephones, and other various kinds of electronic equipment ■Material Part Material Finish Remarks Pin header (Through hole) Polyamid Black Receptacle (Through hole) PBT Insulator Pin header (SMT) UL94V-0 Light brown PPS (Note) Receptacle (SMT) Crimping socket PBT Black Pin header Brass Contact Receptacle Selective gold plated --------------- Phosphor bronze Crimping contact Note : Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector. C10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Ordering Information ● Pin Header (DIP type) Series Name: A3B : double row 1 A3B - 12 P - 2 DS A4B : single row 1 2 3 4 5 A3C : double row (low profile product) Number of contacts: Double row...4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 2 32, 44, 40, 50 (44 and 50 contacts correspond to the right angle type only. Straight angle type corresponds to the A3C type.) Single row... 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 P, PA: Pin header 3 4 Contact pitch : 2mm Contact type 5 DS : Right angle type DSA : Straight type ● Receptacle (DIP type) Series Name: A3 : double row 1 A3 - 44 D - 2 DS A3C : double row 1 2 3 4 5 A3D : double row (for FFC, FFC) (Note) Number of contacts: 3 : 44, 50 2 3C, 3D : 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 28, 32, 50 DA: Receptacle 3 Contact pitch : 2mm 4 Contact type 5 DS: Right angle type DSA: Straight type (lead length: 3mm) DSC: Straight type (lead length: 2mm) DSE: Straight type (lead length: 1.27mm) Note : A standoff has been added to the center portion of the connector to provide stable mounting. ● Crimping Socket Series Name: A3B : double row 1 A3B - 44 D - 2 C A4B : single row 1 2 3 4 5 2 Number of contacts: Double row...4, 6, 8, 10, 12, 14, 18, 20, 24, 26, 28, 44 Single row... 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 16, 18 Contact alignment: D : double row 3 S : single row Contact pitch : 2mm 4 Connection type: C : crimping 5 C11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ●Crimping Contact Series Name: A 1 A 3B - 2630 SCFC 2 Series No.: 3B 1 2 3 4 Applicable cable size 3 2630: AWG#26 to AWG#30 3236: AWG#32 to AWG#36 Packaging type 4 SCFC: Reel SCC: Bag ● Pin Header (SMT type) Series Name: A 1 A 3 A - 44 P A - 2 SV Series No.: 3 2 1 2 3 4 5 6 7 8 Positioning Boss:A : With boss 3 No symbol : Without boss Number of contacts: 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 28, 30, 32, 44, 40, 50 4 P: Pin header 5 6 A: Selective gold plating Contact pitch : 2mm 7 Contact type 8 SV: Board virtical type ● Receptacle (SMT type) Series Name: A 1 A 3 A - 32 D A - 2 SV Series No.: 3 2 1 2 3 4 5 6 7 8 Positioning Boss: A : With boss 3 No symbol : Without boss Number of contacts: 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 28, 30, 32 4 5 D: Receptacle A: Selective gold plating 6 Contact pitch : 2mm 7 Contact type 8 SV: Virtical type C12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Pin Header ●A3B Straight Type Part Number CL No. Number of Contacts A B RoHS A3B-04PA-2DSA(71) 621-0401-1-71 4 04.0 02.0 A3B-06PA-2DSA(71) 621-0402-4-71 6 06.0 04.0 A3B-08PA-2DSA(71) 621-0403-7-71 8 08.0 06.0 A3B-10PA-2DSA(71) 621-0404-0-71 10 10.0 08.0 A3B-12PA-2DSA(71) 621-0405-2-71 12 12.0 10.0 A3B-14PA-2DSA(71) 621-0406-5-71 14 14.0 12.0 A3B-16PA-2DSA(71) 621-0407-8-71 16 16.0 14.0 A3B-18PA-2DSA(71) 621-0408-0-71 18 18.0 16.0 YES BPCB mounting pattern A3B-20PA-2DSA(71) 621-0409-3-71 20 20.0 18.0 A3B-22PA-2DSA(71) 621-0410-2-71 22 22.0 20.0 B±0.1 A3B-24PA-2DSA(71) 621-0411-5-71 24 24.0 22.0 2±0.05 A3B-26PA-2DSA(71) 621-0412-8-71 26 26.0 24.0 A3B-28PA-2DSA(71) 621-0413-0-71 28 28.0 26.0 A3B-30PA-2DSA(71) 621-0414-3-71 30 30.0 28.0 +0.1 A3B-32PA-2DSA(71) 621-0415-6-71 32 32.0 30.0 Ø0.8 _0 Note: Please, order the product per 100 pcs. ●A3B Right Angle Type Part Number CL No. Number of Contacts A B Kink Positions RoHS A3B-04PA-2DS(71) 621-0351-5-71 4 04.0 02.0 2 A3B-06PA-2DS(71) 621-0352-8-71 6 06.0 04.0 1 or 2 alternately A3B-08PA-2DS(71) 621-0353-0-71 8 08.0 06.0 2 alternately A3B-10PA-2DS(71) 621-0354-3-71 10 10.0 08.0 2 or 3 alternately A3B-12PA-2DS(71) 621-0355-6-71 12 12.0 10.0 3 alternately A3B-14PA-2DS(71) 621-0356-9-71 14 14.0 12.0 3 or 4 alternately A3B-16PA-2DS(71) 621-0357-1-71 16 16.0 14.0 4 alternately A3B-18PA-2DS(71) 621-0358-4-71 18 18.0 16.0 4 or 5 alternately A3B-20PA-2DS(71) 621-0359-7-71 20 20.0 18.0 5 alternately YES A3B-22PA-2DS(71) 621-0360-6-71 22 22.0 20.0 5 or 6 alternately A3B-24PA-2DS(71) 621-0361-9-71 24 24.0 22.0 6 alternately A3B-26PA-2DS(71) 621-0362-1-71 26 26.0 24.0 6 or 7 alternately BPCB mounting pattern A3B-28PA-2DS(71) 621-0363-4-71 28 28.0 26.0 7 alternately A3B-30PA-2DS(71) 621-0364-7-71 30 30.0 28.0 7 or 8 alternately A3B-32PA-2DS(71) 621-0365-0-71 32 32.0 30.0 8 alternately B±0.1 A3B-44PA-2DS(71) 621-0377-9-71 44 44.0 42.0 11 alternately 2±0.05 A3B-50PA-2DS(71) 621-0383-1-71 50 50.0 48.0 12 or 13 alternately Note 1: Please order the product per 100 pcs. Note 2: Diameter of 28 or more contacts is Ø0.95±0.04. Note 2 Ø0.9±0.04 C13 2±0.05 2±0.05 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector A4B Straight Type ● Part Number CL No. Number of Contacts A B RoHS A4B-02PA-2DSA(71) 622-0401-8-71 2 04.0 02.0 A4B-03PA-2DSA(71) 622-0402-0-71 3 06.0 04.0 A4B-04PA-2DSA(71) 622-0403-3-71 4 08.0 06.0 A4B-05PA-2DSA(71) 622-0404-6-71 5 10.0 08.0 A4B-06PA-2DSA(71) 622-0405-9-71 6 12.0 10.0 A4B-07PA-2DSA(71) 622-0406-1-71 7 14.0 12.0 A4B-08PA-2DSA(71) 622-0407-4-71 8 16.0 14.0 BPCB mounting pattern YES A4B-09PA-2DSA(71) 622-0408-7-71 9 18.0 16.0 A4B-10PA-2DSA(71) 622-0409-0-71 10 20.0 18.0 B±0.1 A4B-12PA-2DSA(71) 622-0411-1-71 12 24.0 22.0 2±0.05 A4B-13PA-2DSA(71) 622-0412-4-71 13 26.0 24.0 A4B-14PA-2DSA(71) 622-0413-7-71 14 28.0 26.0 A4B-15PA-2DSA(71) 622-0414-0-71 15 30.0 28.0 +0.1 Ø0.8 0 A4B-16PA-2DSA(71) 622-0415-2-71 16 32.0 30.0 Note: Please order the product per 100 pcs. ●A4B Right Angle Type Part Number CL No. Number of Contacts A B Kink Positions RoHS 2 A4B-02PA-2DS(71) 622-0351-1-71 2 04.0 02.0 A4B-03PA-2DS(71) 622-0352-4-71 3 06.0 04.0 1 or 2 alternately 2 alternately A4B-04PA-2DS(71) 622-0353-7-71 4 08.0 06.0 A4B-05PA-2DS(71) 622-0354-0-71 5 10.0 08.0 2 or 3 alternately 3 alternately A4B-06PA-2DS(71) 622-0355-2-71 6 12.0 10.0 A4B-07PA-2DS(71) 622-0356-5-71 7 14.0 12.0 3 or 4 alternately BPCB mounting pattern A4B-08PA-2DS(71) 622-0357-8-71 8 16.0 14.0 4 alternately A4B-09PA-2DS(71) 622-0358-0-71 9 18.0 16.0 4 or 5 alternately YES A4B-10PA-2DS(71) 622-0359-3-71 10 20.0 18.0 5 alternately A4B-11PA-2DS(71) 622-0360-2-71 11 22.0 20.0 5 or 6 alternately B±0.1 A4B-12PA-2DS(71) 622-0361-5-71 12 24.0 22.0 6 alternately 2±0.05 A4B-13PA-2DS(71) 622-0362-8-71 13 26.0 24.0 6 or 7 alternately A4B-14PA-2DS(71) 622-0363-0-71 14 28.0 26.0 7 alternately A4B-15PA-2DS(71) 622-0364-3-71 15 30.0 28.0 7 or 8 alternately Note 2 Ø0.9±0.04 A4B-16PA-2DS(71) 622-0365-6-71 16 32.0 30.0 8 alternately Note 1: Please order the product per 100 pcs. Note 2: Dinmeter is 0.95±0.04 for 14pos, or more. C14 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Pin Header BPCB mounting pattern Note: Please order the product per 100 pcs. Unit: mm Part Number CL No. Number of Contacts A B RoHS A3C-02P-2DSA 621-0601-0 2 02.0 ---- A3C-04P-2DSA 621-0602-3 4 04.0 02.0 A3C-06P-2DSA 621-0603-6 6 06.0 04.0 A3C-08P-2DSA 621-0604-9 8 08.0 06.0 A3C-10P-2DSA 621-0605-1 10 10.0 08.0 A3C-12P-2DSA 621-0606-4 12 12.0 10.0 A3C-14P-2DSA 621-0607-7 14 14.0 12.0 A3C-16P-2DSA 621-0608-0 16 16.0 14.0 A3C-18P-2DSA 621-0609-2 18 18.0 16.0 YES A3C-20P-2DSA 621-0610-1 20 20.0 18.0 A3C-22P-2DSA 621-0611-4 22 22.0 20.0 A3C-24P-2DSA 621-0612-7 24 24.0 22.0 A3C-26P-2DSA 621-0613-0 26 26.0 24.0 A3C-28P-2DSA 621-0614-2 28 28.0 26.0 A3C-32P-2DSA 621-0615-5 32 32.0 30.0 A3C-44P-2DSA 621-0622-0 44 44.0 42.0 A3C-48P-2DSA 621-0625-9 48 48.0 46.0 A3C-50P-2DSA 621-0628-7 50 50.0 48.0 C15 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Receptacle ●A3 Right Angle Type BPCB mounting pattern Unit: mm Part Number CL No. A B RoHS A3-44DA-2DS(71) 621-0711-9-71 44 42 YES A3-50DA-2DS(71) 621-0714-7-71 50 48 Note: Please order the product per 100 pcs. C16 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Receptacle KA3C Type BPCB mounting pattern Unit: mm Part Number CL No. Number of Contacts A B C RoHS Part Number CL No. Number of Contacts A B C RoHS A3C-04DA-2DSA(71) 621-0501-6-71 3.0 A3C-20DA-2DSA(71) 621-0509-8-71 3.00 20 18.0 4 04.0 02.0 20.0 A3C-04DA-2DSC(71) 621-0531-7-71 2.0 A3C-20DA-2DSC(71) 621-0539-9-71 2.00 621-0502-9-71 3.0 A3C-24DA-2DSA(71) 621-0511-0-71 3.00 A3C-06DA-2DSA(71) 6 06.0 04.0 24 24.0 22.0 621-0532-0-71 2.0 A3C-24DA-2DSC(71) 621-0541-0-71 2.00 A3C-06DA-2DSC(71) 621-0503-1-71 3.0 A3C-24DA-2DSE(71) 621-0571-1-71 1.27 A3C-08DA-2DSA(71) 8 08.0 06.0 621-0533-2-71 2.0 A3C-28DA-2DSA(71) 621-0513-5-71 3.00 A3C-08DA-2DSC(71) 28 28.0 26.0 A3C-10DA-2DSA(71) 621-0504-4-71 3.0 A3C-28DA-2DSC(71) 621-0543-6-71 2.00 YES 10 10.0 08.0 A3C-10DA-2DSC(71) 621-0534-5-71 2.0 A3C-32DA-2DSA(71) 621-0515-0-71 3.00 YES 32 32.0 30.0 621-0505-7-71 3.0 A3C-32DA-2DSC(71) 621-0545-1-71 2.00 A3C-12DA-2DSA(71) 12 12.0 10.0 621-0535-8-71 2.0 A3C-32DA-2DSE(71) 621-0575-2-71 1.27 A3C-12DA-2DSC(71) 621-0506-0-71 3.0 A3C-50DA-2DSA(71) 621-0524-1-71 3.00 A3C-14DA-2DSA(71) 14 14.0 12.0 621-0536-0-71 2.0 A3C-50DA-2DSC(71) 621-0554-2-71 50 50.0 48.0 2.00 A3C-14DA-2DSC(71) A3C-16DA-2DSA(71) 621-0507-2-71 3.0 A3C-50DA-2DSE(71) 621-0584-3-71 1.27 16 16.0 14.0 A3C-16DA-2DSC(71) 621-0537-3-71 2.0 621-0508-5-71 3.0 A3C-18DA-2DSA(71) 18 18.0 16.0 621-0538-6-71 2.0 A3C-18DA-2DSC(71) C17 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ●A3D Type BPCB mounting pattern Unit: mm Part Number CL No. Number of Contacts A B RoHS A3D-04DA-2DSE(71) 621-0751-3-71 4 04.0 02.0 A3D-06DA-2DSE(71) 621-0752-6-71 6 06.0 04.0 A3D-08DA-2DSE(71) 621-0753-9-71 8 08.0 06.0 A3D-10DA-2DSE(71) 621-0754-1-71 10 10.0 08.0 A3D-12DA-2DSE(71) 621-0755-4-71 12 12.0 10.0 A3D-14DA-2DSE(71) 621-0756-7-71 14 14.0 12.0 YES A3D-16DA-2DSE(71) 621-0757-0-71 16 16.0 14.0 A3D-18DA-2DSE(71) 621-0758-2-71 18 18.0 16.0 A3D-20DA-2DSE(71) 621-0759-5-71 20 20.0 18.0 A3D-28DA-2DSE(71) 621-0763-2-71 28 28.0 26.0 A3D-44DA-2DSE(71) 621-0766-0-71 44 44.0 42.0 C18 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Crimping Socket ●A3B-*D-2C Part Number CL No. Number of Contacts A B RoHS A3B-04D-2C 621-0305-8 4 04.0 02.0 A3B-06D-2C 621-0306-0 6 06.0 04.0 A3B-08D-2C 621-0307-3 8 08.0 06.0 A3B-10D-2C 621-0308-6 10 10.0 08.0 A3B-12D-2C 621-0309-9 12 12.0 10.0 A3B-14D-2C 621-0310-8 14 14.0 12.0 YES A3B-18D-2C 621-0311-0 18 18.0 16.0 Note 1. * indicates the number of contacts. A3B-20D-2C 621-0312-3 20 20.0 18.0 A3B-24D-2C 621-0313-6 24 24.0 22.0 Note 2. Please order the product per 100 pcs. A3B-28D-2C 621-0314-9 28 28.0 26.0 A3B-44D-2C 621-0330-5 44 44.0 42.0 Note 3. Use other contacts in combination. (Example: 50 contacts = 44 contacts + 6 contacts) ●A4B-*S-2C Part Number CL No. Number of Contacts A B RoHS A4B-02S-2C 622-0301-3 2 04.0 02.0 A4B-03S-2C 622-0302-6 3 06.0 04.0 A4B-04S-2C 622-0303-9 4 08.0 06.0 A4B-05S-2C 622-0304-1 5 10.0 08.0 A4B-06S-2C 622-0305-4 6 12.0 10.0 A4B-08S-2C 622-0306-7 8 16.0 14.0 YES A4B-10S-2C 622-0307-0 10 20.0 18.0 A4B-12S-2C 622-0308-2 12 24.0 22.0 A4B-15S-2C 622-0311-7 15 30.0 28.0 Note 1. * indicates the number of contacts. A4B-16S-2C 622-0310-4 16 32.0 30.0 Note 2. Please, order the product per 100 pcs. A4B-18S-2C 622-0309-5 18 36.0 34.0 C19 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Crimping Contact SCC contact SCFC contact Note 1. The plating specification is shown as follows: Note 2. "30" is stamped on A3B-2630SCFC(SCC), (Contact area) : Gold plating and "36" is stamped on A3B-3236SCFC(SCC). (Others): Nickel plating Part Number CL No. Applicable Cable Type Quantity Crimping Tool RoHS A3B-2630SCFC 621-0301-7 Reel 10000 Automatic crimper CM-105-AP 105-A3B-2630 AWG#26 to #30 A3B-2630SCC 621-0302-0 AWG#26 to #30 Bag 100 A3B-TA2630HC YES A3B-3236SCFC 621-0303-2 AWG#32 to #36 Reel 10000 Automatic crimper CM-105-AP 105-A3B-3236 BCrimping Tool Manual crimping tool A3B-TA2630HC Specification (CM-105 type) Automatic crimping machine Features CM-105 This tool is a new model to meet many user needs, and finely designed to enhance operativity and expand the application range for setup adjustment and various applicator installations. The easy to handle semi-automatic crimping machine can be used for crimping connection of various strip contacts. Specification Power supply 100V AC, single phase 200W Gross weight 75kg Machining range 2000 to 4000 contacts/hour Remarks Crimping of various contacts by replacing the applicator Type Item Part Number CL No. Applicable Contact Applicable Cable Manual Manual crimping tool A3B-TA2630HC 550-0200-7 A3B-2630SCC AWG#26 to #30 Automatic crimping machine CM-105 901-0005-4 --------------- --------------- Automatic AP105-A3B-2630S 901-4016-2 A3B-2630SCFC AWG#26 to #30 Applicator AP105-A3B-3236S 901-4017-5 A3B-3236SCFC AWG#32 to #36 C20 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector BShort Pin Please, order the product per 1000 pcs. Part Number CL No. Material Finish RoHS Housing PBT Black (UL94V-0) A3-SP(A) 621-0180-4 YES Contact Phosphor bronze Selective gold plating B Polarizing Key A3-GPIN(A) Note: This product is provided in a set of 10 pieces in conjunction with a runner. The unit for sale consists of 10 sets, which are included in one pack. Part Number CL No. Material RoHS A3-GPIN(A) 621-0178-2 Poly acetal (white) YES C21 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Pin Header BPCB mounting pattern +0.1 Note. For automatic board placement, recommended boss dia. is 1.2 . - 0 PCB mounting pattern for 4 pos. Unit: mm Part Number CL No. Number of Contacts A B C RoHS A3A-04PA-2SV(71) 621-1000-6-71 ------------ 4 04.0 02.0 A3A-04PA-2SV(71) 621-1040-0-71 02.0 A3A-06PA-2SV(71) 621-1001-9-71 ------------ 6 06.0 04.0 A3A-06PA-2SV(71) 621-1041-3-71 02.0 A3A-08PA-2SV(71) 621-1002-1-71 ------------ 8 08.0 06.0 A3A-08PA-2SV(71) 621-1042-6-71 04.0 A3A-10PA-2SV(71) 621-1003-4-71 ------------ 10 10.0 08.0 A3A-10PA-2SV(71) 621-1043-9-71 06.0 A3A-12PA-2SV(71) 621-1004-7-71 ------------ 12 12.0 10.0 A3A-12PA-2SV(71) 621-1044-1-71 08.0 A3A-14PA-2SV(71) 621-1005-0-71 ------------ 14 14.0 12.0 A3A-14PA-2SV(71) 621-1045-4-71 10.0 A3A-16PA-2SV(71) 621-1006-2-71 ------------ 16 16.0 14.0 YES A3A-16PA-2SV(71) 621-1046-7-71 12.0 A3A-20PA-2SV(71) 621-1008-8-71 ------------ 20 20.0 18.0 A3A-20PA-2SV(71) 621-1048-2-71 16.0 A3A-24PA-2SV(71) 621-1010-0-71 ------------ 24 24.0 22.0 A3A-24PA-2SV(71) 621-1050-4-71 20.0 A3A-28PA-2SV(71) 621-1012-5-71 ------------ 28 28.0 26.0 A3A-28PA-2SV(71) 621-1052-0-71 24.0 A3A-32PA-2SV(71) 621-1014-0-71 ------------ 32 32.0 30.0 A3A-32PA-2SV(71) 621-1054-5-71 28.0 A3A-44PA-2SV(71) 621-1015-3-71 ------------ 44 44.0 42.0 A3A-44PA-2SV(71) 621-1055-8-71 40.0 A3A-50PA-2SV(71) 621-1016-6-71 ------------ 50 50.0 48.0 A3A-50PA-2SV(71) 621-1056-0-71 46.0 C22 (Note) (Note) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector ■Receptacle BPCB mounting pattern +0.1 Note. For automatic board placement, recommended boss dia. is 1.2 . - 0 PCB mounting pattern for 4 pos. Unit: mm Part Number CL No. Number of Contacts A B C RoHS A3A-04DA-2SV(71) 621-1100-0-71 ------------ 4 04.0 02.0 A3A-04DA-2SV(71) 621-1140-5-71 02.0 A3A-06DA-2SV(71) 621-1101-3-71 ------------ 6 06.0 04.0 02.0 A3A-06DA-2SV(71) 621-1141-8-71 A3A-08DA-2SV(71) 621-1102-6-71 ------------ 8 08.0 06.0 A3A-08DA-2SV(71) 621-1142-0-71 04.0 A3A-10DA-2SV(71) 621-1103-9-71 ------------ 10 10.0 08.0 A3A-10DA-2SV(71) 621-1143-3-71 06.0 A3A-12DA-2SV(71) 621-1104-1-71 ------------ 12 12.0 10.0 08.0 A3A-12DA-2SV(71) 621-1144-6-71 A3A-14DA-2SV(71) 621-1105-4-71 ------------ 14 14.0 12.0 YES A3A-14DA-2SV(71) 621-1145-9-71 10.0 A3A-16DA-2SV(71) 621-1106-7-71 ------------ 16 16.0 14.0 A3A-16DA-2SV(71) 621-1146-1-71 12.0 A3A-20DA-2SV(71) 621-1108-2-71 ------------ 20 20.0 18.0 A3A-20DA-2SV(71) 621-1148-7-71 16.0 A3A-24DA-2SV(71) 621-1110-4-71 ------------ 24 24.0 22.0 A3A-24DA-2SV(71) 621-1150-9-71 20.0 A3A-28DA-2SV(71) 621-1112-0-71 ------------ 28 28.0 26.0 A3A-28DA-2SV(71) 621-1152-4-71 24.0 A3A-32DA-2SV(71) 621-1114-5-71 ------------ 30.0 32 32.0 A3A-32DA-2SV(71) 621-1154-0-71 28.0 C23 (Note) (Note) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector BRecommended Temperature Profile HRS test conditions 260 MAX250ç Test boardGlass epoxy 85mm∞60mm∞1.6mm thick Solder method :Reflow 240 220ç Solder composition :Paste, 220 200ç 96.5%Sn/3%Ag/0.5%Cu 200 Metal mask : 0.2mm thick 180 Reflow cycles : 2 cycles 160 150ç 140 The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, 0 volume/thickness and board size/thickness. Consult 90 to 120 sec. MAX 60 sec. Time (sec.) your solder paste and equipment manufacturer for Preheating(150 to 200ç) Soldering (220ç min) specific recommendations. BFunctional Block Chart Receptacle and Socket Side Pin Header Side A3 (A)-*DA-2SV A3 (A)-*PA-2SV Straight SMT Type Straight SMT Type A3 (A)-*DA-2DSA(DSC, DSE) A3C-*P-2DSA Straight Through hole Type Straight Through hole (low profile) Type A3B-*PA-2DSA Straight Through hole Type A3B-*D-2C Cable crimping type A3B-*PA-2DS Right Angle Through hole Type C24 Temperature (ç) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A3 • A4 Series●2mm Pitch Miniature Connector BApplication Pattern (A3 series) A3(A)-*DA-2SV A3C-*DA-2DSA A3B-*D-2C A3(A)-*PA-2SV A3(A)-*PA-2SV A3(A)-*PA-2SV A3C-*DA-2DSA A3B-*D-2C A3(A)-*DA-2SV A3C-*P-2DSA A3C-*P-2DSA A3C-*P-2DSA A3(A)-*DA-2SV A3C-*DA-2DSA A3B-*D-2C A3B-*PA-2DSA A3B-*PA-2DSA A3B-*PA-2DSA A3(A)-*DA-2SV A3C-*DA-2DSA A3B-*D-2C A3B-*PA-2DS A3B-*PA-2DS A3B-*PA-2DS Note.When the connector is mounted on the board surface, the mounting height is a size designed in single connector. Solder paste used for installation will slightly change according to solder thickness. C25