NXDB-SYS netX System Development Board Highlights Two Ethernet ports with switch and hub functionality JTAG interface (on Board) and ETM interface (on CPU module) CPU signals accessible via grouped pin-contact strips One basic board for all netX CPUs Including master license Das System Development Board ist die Basis für umfangreiche Hard- und Softwareentwicklungen rund um den netX. Mit Hilfe von verschiedenen netX CPU Modulen, können die unterschiedlichen netX Derivate auf dem System Development Board evaluiert und verwendet werden. Hierbei stehen unterschiedliche Schnittstellen, Touch LCD-Display, sowie Schalte und LEDs als digitale Ein- und Ausgänge zur Verfügung und erlauben weitgehend alle Funktionen in Betrieb zu nehmen. Die auf Stiftleisten herausgeführten Signale können angemessen zum Testen mit einem eigenen Board verbunden werden. Das Dual-Port-Memory der Host- Schnittstelle kann über Flachbandkabel und über das NXPCA-PCI Board in einen PC geführt werden. Neben dem Real-Time-Kernel rcX sind die Betriebssysteme Windows CE, Linux und VxWorks auf dem Development Board (bei Verwendung des netX100/500 CPU-Modul) verfügbar. Technical Data netX10 netX50 netX100 netX500 Ethernet-Interface Port 10BASE-T / 100BASE-TX, Half-/ Full-Duplex, IEEE 1588 time stamp 1x 2x 2x 2x PHY Integrated, Auto-Negotiation, Auto-Crossover x x x x Real-Time Ethernet EtherCAT x x x Ethernet/IP Ethernet/IP x x x Modbus IDA x x x POWERLINK with integrated HUB x x x PROFINET RT und IRT with integrated Switch x x x SERCOS-III x x x VARAN x x x Feldbus-Interface Fieldbus „The systems can be combinated Master can be realized ONLY with netX100/500“ AS-Interface, only Master x x CANopen x x x x DeviceNet x x x x CC-Link x x x x CompoNet x x x x PROFIBUS x x x x Periphery IO-Link Controller 4 Channels, controlled by xPIC 8 Channels, automatic direction control Color-LCD-Controller „for TFT-Panels, Color-STN- and Mono-STN-Panels resolution 320 x 200 to 640 x 480, color depth 1, 2, 4, 8, 16-bit“ x CCD-Sensor Controller max. 50 MHz, 640x480 pixels, free configurable data formats x Real Time Clock with external power supply x IEEE 1588 System Time 32-bit second counter, 32-bit nanosecond counter x x USB Revision 1.1, 12 MBaud Full-Speed, Host- or Device-Mode Device only Device only Host / Device Host / Device UART 16550 compatible, max. 3 MBaud, RTS/CTS support Number 2 3 3 3 I²C Master and Slave x x x x SPI Master and Slave, 3 Chip-Select-Signals x x x x ADC Sample + Hold / 1 MS/s 2 x 8 Channels 2 x 4 Channels 2 x 4 Channels PWM 8 Channels / 0–20 kHz/12-bit 0–20 kHz/12-bit resolution Encoder 2 Channels / Filter / Capture / exact velocimetry supported / Interrupt / Synchronization x x x CORDIC function accelerator for transcendent functions / polar to cartesian coordinate transformation x Gerneral I/O 3.3 V / 6 mA Number 24 32 16 16 Memory-Interface Memory Bus 8/16-bit-Data-Bus / 24-bit-Address-Bus x 32-bit-Data-Bus / 24-bit-Address-Bus x x x Address Area 64 MByte SDRAM 256 MByte SDRAM 256 MByte SDRAM 256 MByte SDRAM 64 MByte Flash 64 MByte Flash 64 MByte Flash 64 MByte Flash Memory Devices SDRAM, SRAM, Flash x x x x Host-Interface Dual-Port-Memory-Mode 8 / 16-bit data bus, 8 / 16 / 32-bit data bus 8/16-bit-data bus 8/16-bit data bus SPI Slave Mode with up to 80 MHz transmission clock Extension-Mode 8/16-bit-Data-Bus, 24-bit-Address-Bus, Bustiming adjustble x x x x PIO-Mode free programmable inputs and outputs Number 47 53 53 53 Debug-Interface JTAG ARM-Prozessor and Boundary-Scan x x x x ETM Embedded Trace Macrocell, ETM9 V2 Medium Size x x x x USB Access to internal bebug unit with single step and 2 Hardware Break Points x Operating Conditions Operating Voltage 1,5V Core x x x x 3.3V Input / Output x x x x Operating Temperature without heat sink „-40…+85“°C „-40…+70“°C „-40…+70“°C „-40…+70“°C Dimension 210mm x 297 mm Note: Alle specifications are premliminary and subject to change without notice. Technical Data Technical Data/ Product overview A JTAG debugger is required for programming and star- tup (not included with the delivery). We recommend the Hitex JTAG emulator Tantino. Online recording of running the commands is possible via the ETM interface, e.g. via Hitex Tanto. See http://www.hitex.com/products.html Article description Article number Article NXDB-SYS 7701.000 netX System Development Board NXDM 500-F16D32 7711.110 netX 500 Development Module NXDM 100-F16D32 7721.110 netX 100 Development Module NXDM 50-F16D32 7731.110 netX 50 Development Module NXDM 10-F16D8 7751.110 netX 10 Development Module NXPCA-PCI 7902.100 netX PCI Adapterboard für NXHX NXROB-CM 9035.020 Camera Modul in Connection with NXDM 500 Headquarters Subsidiaries Germany China India Japan Switzerland Hilscher Gesellschaft für Hilscher Systemautomation (Shanghai) Co. Ltd. Hilscher India Pvt. Ltd. Hilscher Japan KK Hilscher Swiss GmbH Systemautomation mbH 200010 Shanghai New Delhi-110065 Tokyo, 160-0022 4500 Solothurn Rheinstrasse 15 Phone: +86 (0) 21-6355-5161 Phone: +91 11 43055431 Phone: +81 (0) 3-5362-0521 Phone: +41 (0) 32 623 6633 65795 Hattersheim E-Mail: info@hilscher.cn E-Mail: info@hilscher.in E-Mail: info@hilscher.jp E-Mail: info@hilscher.ch Phone: +49 (0) 6190 9907-0 Fax: +49 (0) 6190 9907-50 France Italy Korea USA E-Mail: info@hilscher.com Hilscher France S.a.r.l. Hilscher Italia S.r.l. Hilscher Korea Inc. Hilscher North America, Inc. Web: www.hilscher.com 69500 Bron 20090 Vimodrone (MI) Suwon, Gyeonggi, 443-734 Lisle, IL 60532 Phone: +33 (0) 4 72 37 98 40 Phone: +39 02 25007068 Phone: +82 (0) 31-695-5515 Phone: +1 630-505-5301 E-Mail: info@hilscher.fr E-Mail: info@hilscher.it E-Mail: info@hilscher.kr E-Mail: info@hilscher.us Distributors (more information at www.hilscher.com) Overview 11/2011 DE