netPLC Programmable Logic Controller Technology Communication and Control combined PLC with fieldbus connection based on netX controller chip ® IEC 61131 or SIMATIC S7 compatible PLC As PROFIBUS, CANopen, DeviceNet master or others Inclusive programming and bus configuration tool + Read-to-use or in a customer specific design Already integrated into ready-to-use PLC platforms Controller technology usable in any netX controller based design Local I/O, serial interface, I2C/SPI/UART bus as advanced options netPLC technology combines fieldbus and PLC functionality in netX controller based designs. As PLCs bet- ween the runtime environments CoDeSys Control V3 from Smart Software Solutions and ProConOS eCLR ® from KW-Software as IEC 61131 or IBHSoftec PLC as SIMATIC S7 compatible PLCs can be chosen. As communication networks PROFIBUS-DP, CANopen or DeviceNet master are supported. To program the three PLC types the programming environments CoDeSys, MULTIPROG Express and S7 for ® Windows are offered as freeware. Dependent on the type of PLC the target‘s USB or the Ethernet interface can be used for configuration. CoDeSys and ProConOS can be combined with any communication network, ® the SIMATIC S7 compatible PLC with PROFIBUS-DP only. This type of PLC can be used in conjunction with ® Siemens original STEP7 engineering tool. netPLC Successfully realized: Slot PLC PC Card Implementing PLC technology transforms any netX controller based device into a full-sized automation Programmable Logic Controller LED Indicators A Slot PLC enables a safe and independent platform. Logic controllers of the lower and mid- control of decentralized I/O peripherals with range performance class can be realized to control a PC platform. Shifting critical control pro- local I/Os and decentralized I/Os with fieldbus. cesses into the card allows the usage of Between different hardware options with different Operating Mode Switch the full PC resource for data-intensive visu- characteristics of a classic PLC can be chosen. alization, monitoring and logging purposes. A serial FLASH component serves as storage medi- Programming Interface Depending on the PLC an OPC server is inclu- um for firmware and configuration and a SDRAM to ded in the delivery or optionally available. execute the PLC‘s program. In an advanced version Programming, configuration and diagnostics are an MRAM component serves to store online data locally performed via the PCI system bus or from Removeable Memory non-volatile. The optional real-time clock enables remote via the USB port or over an Ethernet client/ the programming of PLC programs needing date server based connection from another station. and time stamp information. Additional Powering 24 V DC additional powering supplies the card in As programming interface USB and Ethernet can case of a PC power loss and guarantees continuo- be used. The supported operator mode switch us operation and maximum availability of the con- in the positions RUN/STOP allows to change the trolled system. The battery included in the delive- PLC‘s mode on-site. 4 LEDs may serve to visua- ry buffers the Real-Time Clock and a RAM to save lize PLC and bus state information. The support of volatile key process register online in case of a removable storage media such as SD or MMC card total power loss. In the event the hardware fails, a enables moving a saved configuration into a spare memory-card slot enables moving the loaded data unit in case of a device failure. into a spare unit in seconds with a micro SD card. . Load Memory Real-Time Clock Program Memory Non-volatile Memory Bus System Parameter Value Parameter Value CPU netX 100/500 Other Peripherals SPI, I2C, UART Load Memory 4 MB serial FLASH Programing Interface USB or Ethernet Program Memory 8/32 MB SDRAM LED Indicators LEDs SYS / APL / COM0 /COM1 Remanente Memory 128 kByte MRAM or Operating Mode Switch State RUN/STOP 256kByte SRAM, battery backuped Revmoveable Memory MMC or SD Supported Bus Systems PROFIBUS-DP Operating Temperature 0 ... 55 °C CANopen DeviceNet or others PLCs CoDeSys Control V3 Plug-in Module Slide-in Module DIN rail Module Mini PCI Express ProConOS eCLR Local I/Os up to 78 E/As, Address/Data bus alternatively S7 Analog inputs 6 ADCs, 10-Bit resolution Operating System Windows XP,Vista, 7 Technical Data Technical Data/ Product Overview Block Diagram Slot PLC PC Card Article Description Article NPLC-C100-DP/CDS-OPC PC card with IEC-61131 compatible PLC CoDeSys from 3S, OPC server and PROFIBUS-DP master ® NPLC-C100-DP/S7 PC card with STEP7 compatible PLC from IBHsoftec and PROFIBUS-DP master NPLC-C100-DP/CLR PC- card with IEC-61131 compatible PLC ProConOS eCLR from KW-Software and PROFIBUS-DP master Note: All technical data can be altered without any notice. Headquarters Subsidiaries Germany China India Japan Switzerland Hilscher Gesellschaft für Hilscher Systemautomation (Shanghai) Co. Ltd. Hilscher India Pvt. Ltd. Hilscher Japan KK Hilscher Swiss GmbH Systemautomation mbH 200010 Shanghai New Delhi-110065 Tokyo, 160-0022 4500 Solothurn Rheinstrasse 15 Phone: +86 (0) 21-6355-5161 Phone: +91 11 43055431 Phone: +81 (0) 3-5362-0521 Phone: +41 (0) 32 623 6633 65795 Hattersheim E-Mail: info@hilscher.cn E-Mail: info@hilscher.in E-Mail: info@hilscher.jp E-Mail: info@hilscher.ch Phone: +49 (0) 6190 9907-0 Fax: +49 (0) 6190 9907-50 France Italy Korea USA E-Mail: info@hilscher.com Hilscher France S.a.r.l. Hilscher Italia S.r.l. Hilscher Korea Inc. Hilscher North America, Inc. Web: www.hilscher.com 69500 Bron 20090 Vimodrone (MI) Suwon, Gyeonggi, 443-734 Lisle, IL 60532 Phone: +33 (0) 4 72 37 98 40 Phone: +39 02 25007068 Phone: +82 (0) 31-695-5515 Phone: +1 630-505-5301 E-Mail: info@hilscher.fr E-Mail: info@hilscher.it E-Mail: info@hilscher.kr E-Mail: info@hilscher.us Distributors (more information at www.hilscher.com) Overview 11/2011 GB