netLINK-MPI / netTAP-MPI Ethernet to MPI/DP/PPI Converter for SIMATIC S7® Highlights n Parallel communication to 32 PLCs with up to 16 TCP connections n Direct PLC to PLC communication, also as projected connection n For all S7 Engineering Tools inclusive TIA Portal n Web based configuration, netLINK-MPI protocol support of RFC1006 and DHCP n Full access to PROFIBUS diagnostics ® and services in STEP7 n Automatic DP/MPI baud rate detection netTAP-MPI As directly mountable or as firmly attachable DIN rail mountable device the adapters netLINK- and netTAP- MPI are replacing expensive CP communications processors and allow the programming, visualization and control of S7-200®, S7-300® or S7-400® PLCs over Ethernet. The provided driver integrates into all well-known SIMATIC S7® engineering tools like STEP7® or TIA portal as PG/PC programming interface. The device is setup with the engineering tool itself or with conventional web browsers over the integrated web configuration pages. The adapters are suitable for programming or changing S7-PLC control programs and serve the project engi- neering of HMI devices over the visualization software WinCC. By supporting the „ISO on TCP“ RFC1006 Ethernet protocol any third party or series SIMATIC® type of visualization station can be coupled to the PLC. Once integrated into the office or plant network and connected to the internet also remote maintenance and logging over a router is possible since plain TCP/IP protocol access mechanisms are used. Organized in a network direct communication between two or several PLCs over Ethernet can be realized. Even a coupling of PLCs with no own Ethernet connection is possible using two adapters in conjunction. Featuring full PROFIBUS diagnostics and Master Class 2 DPV1 services unrestricted DP Slave device confi- guration and parameterization is supported in STEP7®. Powered is supplied by a 24 V DC. If supported by the S7 PLC the netLINK-MPI adapter may be powered over the MPI/PROFIBUS connector as well. The extra feed-through DSUB9 connector allows the connection of other devices to the same MPI/DP network. Technical Data/ Product overview netLINK-MPI netTAP-MPI Parameter Value Parameter Value Processor netX 50 Processor netX 50 Power supply 18 … 30 V / ca. 60 mA @ 24 V Power supply 18 … 30 V / ca. 130 mA @ 24 V Supply Mini-COMBICON 3,81mm 2-pole Supply Mini-COMBICON 3,81mm 2-pole or via S7 DSub-9 MPI/PROFIBUS Interfaces Fast Ethernet 10/100 BASE-TX, Interfaces Fast Ethernet 10/100 BASE-TX, MPI/PROFIBUS 12 MBaud IEC 61158 MPI/PROFIBUS 12 MBaud IEC 61158 Display SYS, COM, ACT, LNK Display SYS, COM, ACT, LNK Operating Voltage 0°C … +55°C Operating Voltage 0°C … +60°C Mass (L x B x H) 65 mm x 48 mm x 16 mm Mass (L x B x H) 100 mm x 52 mm x 70 mm Wight ca. 40 g Wight ca. 150 g Emission CISPR 11 Classe A Emission CISPR 11 Classe A Immunity EN 61131-2:2003 Immunity EN 61131-2:2003 ® ® Steuerungstypen SIMATIC S7 200,300,400 CPU/CPs with Steuerungstypen SIMATIC S7 200,300,400 CPU/CPs with MPI/PROFIBUS/PPI Interface MPI/PROFIBUS/PPI Interface Note: All technical data can be altered without notice. Article Description Article No Article NL 50-MPI 1701.430 netLINK-MPI, SIMATIC S7 Programming adapter NT 50-MPI 1758.111 netTAP-MPI, SIMATIC S7 Programming adapter DIN rail mountabler Headquarters Subsidiaries Germany China India Japan Switzerland Hilscher Gesellschaft für Hilscher Systemautomation (Shanghai) Co. Ltd. Hilscher India Pvt. Ltd. Hilscher Japan KK Hilscher Swiss GmbH Systemautomation mbH 200010 Shanghai New Delhi-110065 Tokyo, 160-0022 4500 Solothurn Rheinstrasse 15 Phone: +86 (0) 21-6355-5161 Phone: +91 11 43055431 Phone: +81 (0) 3-5362-0521 Phone: +41 (0) 32 623 6633 65795 Hattersheim E-Mail: info@hilscher.cn E-Mail: info@hilscher.in E-Mail: info@hilscher.jp E-Mail: info@hilscher.ch Phone: +49 (0) 6190 9907-0 Fax: +49 (0) 6190 9907-50 France Italy Korea USA E-Mail: info@hilscher.com Hilscher France S.a.r.l. Hilscher Italia S.r.l. Hilscher Korea Inc. Hilscher North America, Inc. Web: www.hilscher.com 69500 Bron 20090 Vimodrone (MI) Suwon, Gyeonggi, 443-734 Lisle, IL 60532 Phone: +33 (0) 4 72 37 98 40 Phone: +39 02 25007068 Phone: +82 (0) 31-695-5515 Phone: +1 630-505-5301 E-Mail: info@hilscher.fr E-Mail: info@hilscher.it E-Mail: info@hilscher.kr E-Mail: info@hilscher.us Distributors (more information at www.hilscher.com) Overview Technical Data 11/2011 DE