HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 1/27 Document No. DC140-000581 Revision 1.4 TO : Solomon Date : Mar, 20, 2009 HannStar Product Specification (Formal) 7” Color TFT-LCD Module Model: HSD070IDW1-D** Note: 1.Please contact HannStar Display Corp. before designing your product based on this module specification. 2.The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein. 3.The mark “ ** ” of Model means sub-model code. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 2/27 Document No. DC140-000581 Revision 1.4 Record of Revisions Rev. Date Sub-Model Description of change 1.4 Feb, 25, 2009 - Formal Product Specification was first issued. - - - - The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 3/27 Document No. DC140-000581 Revision 1.4 Contents 1.0 General description ……………………………….… p.4 2.0 Absolute maximum ratings …………………………. p.5 3.0 Optical characteristics ………………………………. p.6 4.0 Block diagram ……………………………..……….. p.10 5.0 Interface pin connection ……………………………. p.11 6.0 Electrical characteristics ……………………………. p.13 7.0 Reliability test items…………………………………… p.21 8.0 Outline dimension …………………………….…… p.22 9.0 Lot mark ……………………………………………... p.24 10.0 Package specification ………………………………. p.25 11.0 General precaution ……………………………………. p.26 The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 4/27 Document No. DC140-000581 Revision 1.4 1.0 GENERAL DESCRIPTION 1.1 Introduction HannStar Display model HSD070IDW1-D is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back- light system. This TFT LCD has a 7.0 (16:9) inch diagonally measured active display area with WVGA (800 horizontal by 480 vertical pixel) resolution. 1.2 Features ■ 7 (16:9 diagonal) inch configuration ■ 6 bits + FRC driver with 1channel TTL interface ■ LED Backlight ■ Up/Down, Left/Right reversion selection ■ RoHS/ Halogen Free Compliance 1.3 Applications ■ Automotive ■ Mobile NB ■ Digital Photo frame ■ Multimedia applications and Others AV system 1.4 General information Item Specification Unit Outline Dimension 164.9 x 100.0 x 5.7 (Typ.) mm Display area 153.6(H) x 86.64(V) mm Number of Pixel 800 RGB(H) x 480(V) pixels Pixel pitch 0.192(H) x 0.1805(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white Surface treatment Antiglare, Hard-Coating(3H) with EWV film Weight 170 (Typ.) g Back-light Single LED (Side-Light type) Power B/L System 1.68(Max.) W Consumption 1.5 Mechanical Information Item Min. Typ. Max. Unit Horizontal(H) 164.6 164.9 165.2 mm Module Vertical(V) 99.7 100.0 100.3 mm Size Depth(D) 6.0 mm 5.4 5.7 Weight (Without inverter) 170 － g － The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 5/27 Document No. DC140-000581 Revision 1.4 2.0 ABSOLUTE MAXIMUM RATINGS 2.1 Electrical Absolute Rating 2.1.1 TFT LCD Module Item Symbol Min. Max. Unit Note Vcc -0.3 6.0 V GND=0 V 0.3 40 V GND=0 GH Power supply voltage V -20 0.3 V GND=0 GL AV 0.5 15 V AGND=0 DD V 0 6 V COM Logic Signal Input Level V -0.3 Vcc +0.3 V I 2.1.2 Back-Light Unit Item Symbol Typ. Max. Unit Note LED current I 140 － mA (1) (2)(3) L LED voltage V 10.5 － V (1) (2)(3) L Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (2) Ta =25±2℃ (3) Test Condition: LED current 140 mA. The LED lifetime could be decreased if operating IL is larger than 140mA. 2.2 Environment Absolute Rating Item Symbol Min. Max. Unit Note Operating Temperature T -20 70 ℃ opa Storage Temperature T -30 80 ℃ stg The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 6/27 Document No. DC140-000581 Revision 1.4 3.0 OPTICAL CHARACTERISTICS 3.1 Optical specification Item Symbol Condition Min. Typ. Max. Unit Note 400 500 Contrast CR － (1)(2) 5 7 － Rising T R Response msec (1)(3) Θ=0 time 20 28 Falling T － F Normal White luminance 2 (1)(4) Y 280 350 cd/m L － viewing (Center) (I =140mA) L angle Color 0.260 0.310 0.360 W x chromaticity White 0.280 0.330 0.380 W y (CIE1931) Θ 60 75 － L (1)(4) Hor. Θ － 60 75 R Viewing CR>10 angle Θ 40 60 U － Ver. Θ 50 70 D － Θ=0 － Brightness uniformity B 70 - % (5)(7) UNI 6 O’clock Optima View Direction (6) 3.2 Measuring Condition ■ Measuring surrounding: dark room ■ LED current I : 140mA L o ■ Ambient temperature: 25±2 C ■ 15min. warm-up time. 3.3 Measuring Equipment ■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics. ■ Measuring spot size: 20 ~ 21 mm The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 7/27 Document No. DC140-000581 Revision 1.4 Note (1) Definition of Viewing Angle: Θ U 12’ o’clock o Φ=90 Θ L Θ R o o Φ=180 Φ=0 Θ D 6’ o’clock o Φ=270 Note (2) Definition of Contrast Ratio(CR) : measured at the center point of panel Luminance with all pixels white CR = Luminance with all pixels black The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 8/27 Document No. DC140-000581 Revision 1.4 Note (3) Definition of Response Time : Sum of T and T R F white(TFT OFF) black (TFT ON) white(TFT OFF) TR TF 100% 90% Optical response 10% 0% time Note (4) Definition of optical measurement setup The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 9/27 Document No. DC140-000581 Revision 1.4 Note (5) Definition of brightness uniformity 16.7% 50% 83.3% Y Y Y 2 3 4 16.7% Y Y 9 5 Y 1 50% Y Y Y 8 7 6 83.3% (Min Luminance of 9 points) Luminance uniformity = ×100% (Max Luminance of 9 points) Note (6) Rubbing Direction (The different Rubbing Direction will cause the different optimal view direction. Note (7) Measured at the brightness of the panel when all terminals of LCD panel are electrically open. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 10/27 Document No. DC140-000581 Revision 1.4 4.0 BLOCK DIAGRAM 4.1 TFT LCD Module LED CN1 Scan LCD Panel Driver Source Driver Input FPC CN2 4.2 Pixel Format 1,800 1,1 1,2 1,3 1,4 2,1 LCD Display Area 1 Pixel 480 Lines R G B R 480,1 480, R 800 800 pixel (2400 Dots) The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 11/27 Document No. DC140-000581 Revision 1.4 5.0 INTERFACE PIN CONNECTION 5.1 TFT LCD Module CN2 (Input signal): FPC Down Connector, (FH28-60S-0.5SH (HIROSE), 60pin,pitch = 0.5mm) Terminal Symbol I/O Function no. 1 AGND P Analog Ground 2 AVDD P Analog Power 3 VCC P Digital Power 4 R0 I Data Input(LSB) 5 R1 I Data Input 6 R2 I Data Input 7 R3 I Data Input 8 R4 I Data Input 9 R5 I Data Input 10 R6 I Data Input 11 R7 I Data Input(MSB) 12 G0 I Data Input(LSB) 13 G1 I Data Input 14 G2 I Data Input 15 G3 I Data Input 16 G4 I Data Input 17 G5 I Data Input 18 G6 I Data Input 19 G7 I Data Input(MSB) 20 B0 I Data Input(LSB) 21 B1 I Data Input 22 B2 I Data Input 23 B3 I Data Input 24 B4 I Data Input 25 B5 I Data Input 26 B6 I Data Input 27 B7 I Data Input(MSB) 28 DCLK I Clock input 29 DE I Data Enable signal 30 HSD I Horizontal sync input.Negative polarity 31 VSD I Vertical sync input.Negative polarity DE/SYNC mode select .normally pull high H:DE 32 MODE3 I mode.L:HSD/VSD mode global reset pin.Active low to enter reset state.suggest to 33 RSTB I connecting with an RC reset circuit for stability .normally pull high. standby mode,normally pull high STBYB="1",normal 34 STBYB I operation STBYB="0",timming control ,soruce driver will turn off,all output are high-Z Source right or left sequence control.SHLR="L",shift left:last 35 SHLR I data=S1<-S2…S1200=first data SHLR="H",shift right:first data=S1->SS2…S1200=last data The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 12/27 Document No. DC140-000581 Revision 1.4 Terminal Symbol I/O Function no. 36 VCC P Digital Power gate up or down scan control. UPDN="L" , DOWN shift : G1->G2…->G480 ; UPDN="H", up shift: G1<-G2…<-G480 37 UPDN I 38 GND P Digital Ground 39 AGND P Analog Ground 40 AVDD P Analog Power 41 VCOMin I For external VCOM DC input(Optional) Dithering setting: DITH="H" 6bit resolution (last 2 bits of 42 DITH I input data truncated) (default setting) DITH="L" 8bit resolution 43 NC - Not connect 44 NC - Not connect 45 V10 P Gamma correction voltage reference 46 V9 P Gamma correction voltage reference 47 V8 P Gamma correction voltage reference 48 V7 P Gamma correction voltage reference 49 V6 P Gamma correction voltage reference 50 V5 P Gamma correction voltage reference 51 V4 P Gamma correction voltage reference 52 V3 P Gamma correction voltage reference 53 V2 P Gamma correction voltage reference 54 V1 P Gamma correction voltage reference 55 NC - Not connect 56 VGH P Positive Power for TFT 57 VCC P Digital Power 58 VGL P Negative Power for TFT 59 GND P Digital Ground 60 NC - Not connect 5.2 Back-Light Unit CN1 LED Power Source (BHSR-02VS-1) or equivalent Mating Connector: (SBHT-002T-P0.5) or equivalent Terminal no. Symbol Function 1 VL LED power supply (high voltage) 2 GL LED power supply (low voltage) The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 13/27 Document No. DC140-000581 Revision 1.4 6.0 ELECTRICAL CHARACTERISTICS 6.1 TFT LCD Module Item Symbol Min. Typ. Max. Unit Note Vcc 2.7 3.0 3.5 V VGH 14.5 15 20 V Supply Voltage VGL -10 -7 -6.5 V AVDD 9.85 10 10.15 V VCOM VCOMin - 3.9 - V ViH 0.7 Vcc - Vcc V Note (1) Input signal voltage ViL 0 - 0.3 Vcc V IDD - 5.426 - mA Vcc =3.0V IADD - 24.1 - mA AVDD=10 V (Black) Current of power supply IGH - 0.128 - mA VGH=15V IGL - 0.344 - mA VGL= -7V Input level of Vx AVDD/2- AVDD-0.1- V V1~V5 Input level of Vx 0.1- AVDD/2- V V6~V10 Note (1): HSYNC, VSYNC, DE, Digital Data Note (2): Be sure to apply the power voltage as the power sequence spec. Note (3): DGND=AGND=0V,) The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 14/27 Document No. DC140-000581 Revision 1.4 6.2 Back-Light Unit The backlight system is an edge-lighting type with 21 LED. The characteristics of the LED is shown in the following tables. Item Symbol Min. Typ. Max. Unit Note LED current IL － 140 － mA (2) LED voltage VL － 10.5 － V Operating LED life time Hr 20,000 Hour (1)(2) － － LCD MODULE Black 1 Power Supply WHITE(Ground) 2 A Note (1) LED life time (Hr) can be defined as the time in which it continues to o operate under the condition: Ta=25±3 C, typical IL value indicated in the above table until the brightness becomes less than 50%. Note (2) The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25℃ and IL=140mA. The LED lifetime could be decreased if operating IL is larger than 140mA. The constant current driving method is suggested. LED Light Bar Circuit The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 15/27 Document No. DC140-000581 Revision 1.4 Note (3) Suggested Schematic of LED Back-Light Driver Suggested Schematic of LED Back-Light Driver The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 16/27 Document No. DC140-000581 Revision 1.4 6.3 AC Characteristics Ite m Sym bol Mi n. Ty p. Ma x. Un it No te DCLK cycle time Tcp h 25 n s DCLK frequency fc lk 40 MH z 30 DCLK pulse duty Tcw h 60 % 40 50 VSD setup time Tv st n s 8 VSD hold time Tvh d n s 8 HSD setup time Th st n s 8 HSD hold time Th hd n s 8 Data setup time Td su n s 8 Data hold time Td hd n s 8 DE setup time Tes u n s 8 DE hold time Teh d n s 8 Horizontal display area th d Tcp h 80 0 HSD period time th Tcp h 92 8 HSD pulse width thp w Tcp h 1 48 HSD back porch th b Tcp h 40 HSD front porch thf p Tcp h 40 Vertical display area tv d 48 0 th VSD period time tv th 52 5 VSD pulse width tvp w th 3 VSD back porch tv b th 29 VSD front porch tvf p th 13 The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 17/27 Document No. DC140-000581 Revision 1.4 6.4 Timing Diagram of Interface Signal Tcph Tcwl Tcwh // 70% 1 2 Last CLKIN 30% 30% 30% 30% Tdsu Tdhd 70% 70% // First data 2nd data Last data Data 30% // 30% // 70% Tesu DEN CLKIN 30% // Tvst Tvhd // VSD 30% 30% Thhd // HSD 30% 30% 30% Thst Th Sampling clock timing H pulse width (thpw) HSD CLK (HV mode ) 0 1 2 3 4 5 6 7 8 D07~D00 R R R R R R R R - - - - - - - - - G G G G G G G G - - - - - - - - - D17~D10 D27~D20 B B B B B B B B - - - - - - - - - R R R R R R R R - - - - - - - - - D07~D00 G G G G G G G G - - - - - - - - - D17~D10 B B B B B B B B - - - - - - - - - D27~D20 (DE mode) DEN H Blanking (thb) Active Area (thd) H front porch (thfp) Total Area (th) Horizontal display timing range The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 18/27 Document No. DC140-000581 Revision 1.4 tvpw VSD HSD DE tvfp tvb tvd tv Vertical timing The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 19/27 Document No. DC140-000581 Revision 1.4 6.5 Power Sequence Item Min. Typ. Max. Unit T0 0.5 -- 20 msec T1 16 msec T2 20 msec T3 10 msec T4 10 50 msec T5 50 msec Level define 90% 10% T Power On Sequence: VCC-> AVDD -> VGL -> VGH -> Data -> B/L Power Off Sequence: B/L-> Data -> VGH -> VGL -> AVDD -> VCC Notes: Data include R0~R7, G0~G7, B0~B7, HSD, VSD, DCLK, SHLR, UPDN, DE MODE, RSTB, STBYB, SHLR, UPDN, DITH The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 20/27 Document No. DC140-000581 Revision 1.4 6.6 Gamma circuit ** Suggested Gamma Circuit. ** The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 21/27 Document No. DC140-000581 Revision 1.4 7.0 Reliability test items No. Item Conditions Remark o 1 High Temperature Storage Ta=+80 C, 240hrs o 2 Low Temperature Storage Ta=-30 C, 240hrs o High Temperature Operation Ta=+70 C, 240hrs 3 o Low Temperature Operation Ta=-20 C, 240hrs 4 o 5 High Temperature and High Humidity Ta=+60 C, 90%RH, 240hrs (operation) o o 6 Thermal Cycling Test (non operation) -30 C(30min) → +80 C(30min), 200cycles 7 Electrostatic Discharge ±200V,200pF(0Ω) 1 time/each terminal 8 Vibration 1.Random: 1.04Grms, 5~500Hz, X/Y/Z, 30min/each direction 2. Sine: Freq. Range: 8~33.3Hz Stoke: 1.3mm Sweep: 2.9G, 33.3~400Hz X/Z: 2hr, Y: 4hr, cyc: 15min 9 Shock 100G, 6ms, ±X, ±Y, ±Z JIS C7021, A-10 3 time for each direction (Condition A) 10 Vibration (with carton) Random: 0.015G^2/Hz, 5~200Hz -6dB/Octave, 200~400Hz XYZ each direction: 2hr 11 Drop (with carton) Height: 60cm JIS Z0202 1 corner, 3 edges, 6 surfaces Note: There is no display function NG issue occurred, all the cosmetic specification is judged before the reliability stress. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 22/27 Document No. DC140-000581 Revision 1.4 8.0 OUTLINE DIMENSION U Unit : mm 8.1 Outline Dimension The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 23/27 Document No. DC140-000581 Revision 1.4 BM Assembly Tolerance 0 ≦ (A’-A) ≦ 2 (mm) │B’-B│≦ 1 (mm) The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 24/27 Document No. DC140-000581 Revision 1.4 9.0 LOT MARK 9.1 Lot Mark １ ２ ３ ４ ５ ６ ７ ８ ９ 01 11 21 31 41 51 Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number. Note (1) Production Year: Code 8 is defined by the last number of the year, for example Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Mark 1 2 3 4 5 6 7 8 9 0 Note (2) Production Month Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec. Mark 1 2 3 4 5 6 7 8 9 A B C 9.2 Detail of Lot Mark (1) Below label is attached on the backside of the LCD module. See Section 8.0: Outline Dimension. (2) The detail of Lot Mark is attached as below. (3) This is subject to change without prior notice. HSD070IDW1 Rev: * -D 6 A0 The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 25/27 Document No. DC140-000581 Revision 1.4 10.0 PACKAGE SPECIFICATION 10.1 Packing form (1) Package quantity in one carton: 80 pieces. (2) Carton size: 451mm×375mm×284mm. 10.2 Packing assembly drawings Material Notice Box Corrugated Paper Board (AB Flute) Partition/Pad Corrugated Paper Board (B Flute) Corner Pad Corrugated Paper Board (AB Flute) ESD bag PE The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 26/27 Document No. DC140-000581 Revision 1.4 11.0 GENERAL PRECAUTION 11.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life threatening or otherwise catastrophic. 11.2 Disassembling or Modification Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module. 11.3 Breakage of LCD Panel 11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately. 11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is broken. 11.4 Electric Shock 11.4.1. Disconnect power supply before handling LCD module. 11.4.2. Do not pull or fold the LED cable. 11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector or cables in order to prevent electric shock. 11.5 Absolute Maximum Ratings and Power Protection Circuit 11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 11.5.3. It’s recommended to employ protection circuit for power supply. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. HannStar Display Corp. Document Title HSD070IDW1-D Formal Specification For Solomon Page No. 27/27 Document No. DC140-000581 Revision 1.4 11.6 Operation 11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead. 11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly. 11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material. 11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading. 11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 Mechanism Please mount LCD module by using mouting holes arranged in four corners tightly. 11.8 Static Electricity 11.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence. 11.8.2. Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods. 11.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed. 11.10 Disposal When disposing LCD module, obey the local environmental regulations. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.