GT-21097-3005 - GLOBTEK INC.

Description

Globtek Inc. GT-21097-3005 Power Supply - Switching Power supply, 22 Watt.5 V DC

Part Number

GT-21097-3005

Price

Request Quote

Manufacturer

GLOBTEK INC.

Lead Time

Request Quote

Category

PRODUCTS - G

Specifications

DIELECTRIC WITHSTAND VOLTAGE

4242VDC PRIMARY-SECONDARY; 2121 VDC PRIMARY- GROUND

EFFICIENCY

70 % TYPICAL AT NOMINAL INPUT AND FULL LOAD.

FREQUENCY

47 HZ - 63 HZ OR DC

HOLD-UP TIME

10 mSEC MIN AT NOMINAL INPUT AND FULL LOAD

INPUT VOLTAGE

90 VAC TO 264 VAC OR 105 TO 125 VDC

INRUSH CURRENT

45 A MAX AT COLD START

LINE REGULATION

+ 0.5 % MAX AT FULL LOAD

OTHER PROTECTION

INPUT FUSING

OUTPUT CURRENT

NO LOAD TO FULL LOAD,NO MINIMUM LOAD REQUIRED

OUTPUT POWER (RATED)

22 WATTS MAX WITH AC INPUT OR 15.2 W MAX WITH DC INPUT

OUTPUT REGULATION (LINE/LOAD)

+ 2 % FOR MAIN OUTPUT, MEASURED AT O/P CONNECTOR

OUTPUT RIPPLE (PEAK TO PEAK)

1% TYPICAL

OUTPUT VOLTAGE / CURRENT

+ 5.5 VDC AT 0 - 4 A WITH AC INPUT OR +5.5 VDC AT 0 - 2.75A

OVER-CURRENT / SHORT CIRCUIT

HICCUP WITH AUTO RECOVERY TO 1.1 - 1.3 IO

OVER-VOLTAGE PROTECTION

VOLTAGE LIMITED LESS 130% OF NOMINAL VOLTAGE

SAFETY APPROVALS

UL 60950, CUL TO 22.2 # 234, 950,

SWITCHING FREQUENCY

100 KHZ TYPICAL

TURN ON/ TURN OFF OVERSHOOT

4% MAX 500uS MAX RECOVERY TIME FOR 25% STEP LOAD

TURN-ON DELAY

3 SEC MAX ( 15 SEC. MAXIMUM FOR NOMINAL DC INPUT)

Datasheet

GT-21097-3005_D-1781303499S.pdf

464 KiB

Download

Extracted Text

GT-21097 SERIES-50W 0-50 Watts, DeskTop, Switchmode Universal Input, ISO 9001:2000 Single Output Family, ITE REGISTERED Part Number Ordering System (See Page 302) Output Plug/Cord Options (See Page 271) Medical Models (See Page 104) INDOOR USE ONLY ELECTRICAL SPECIFICATIONS: OTHER PROTECTION: INPUT LINE FUSING INPUT VOLTAGE: DIELECTRIC WITHSTAND VOLTAGE: 90 VAC TO 264 VAC 4242VDC (3000VAC) FROM PRIMARY TO SECONDARY INPUT CURRENT: 2121VDC (1500VAC) FROM PRIMARY TO SECONDARY < 1.6 A RMS AT 90 VAC INPUT LEAKAGE CURRENT: INPUT FREQUENCY: <500uA at 264Vac INPUT VOLTAGE 47 HZ - 63 HZ LINE SURGE: OUTPUT CURRENT: EN 61000-4-5 LEVEL 4 NO MINIMUM LOAD REQUIRED EMI: OUTPUT POWER (RATED): COMPLIES WITH EN55022 CLASS B AND FCC PART 15 CLASS 50 WATTS MAX B WHEN TESTED WITH RESISTIVE LOAD, BOTH CONDUCTED OUTPUT RIPPLE (PEAK TO PEAK): AND RADIATED EMI. 1% OF OUTPUT VOLTAGE , PEAK TO PEAK, TYPICAL CE MARK: OUTPUT REGULATION (LINE/LOAD): EN55011, Group 1, Class B, EN55022 Class B, EN55011, Group +/-5% MEASURED AT THE OUTPUT CONNECTOR 1, Class B; EN55024 / EN60601-1-2 / IEC 61000-4-3:2002; LINE REGULATION: EN55024 / EN60601-1-2 / IEC 61000-4-6:2001 ; EN55024 / +/- 1% TYPICAL MEASURED AT FULL LOAD EN60601-1-2 / IEC 61000-4-8:2001; EN55024 / EN60601-1-2 / TURN ON/ TURN OFF OVERSHOOT: IEC 61000-4-11:2001; EN55024 / EN60601-1-2 / IEC 61000-4- 5% MAXIMUM, 1mS TYPICAL RECOVERY TIME FOR 25% 4:2001; EN55024 / EN60601-1-2 / IEC 61000-4-2:2001; EN55024 STEP LOAD / EN60601-1-2 / IEC 61000-4-5:2001; EN55024 / EN 61000-3-3 TURN-ON DELAY: A1: 2001 / EN 61000-3-3 A1: 2001; EN55024 / EN 61000-3- 1 SEC TYPICAL 2:2001 / EN 61000-3-2:2001. UNIT IS ELIGIBLE FOR CE MARK. HOLD-UP TIME: MTBF: 10mS TYPICAL AT NOMINAL INPUT VOLTAGE AND GREATER THAN 200,000 HOURS AT 25°C AMBIENT FULL LOAD TEMPERATURE NOMINAL LINE AND FULL LOAD (MIL-217 STD) INRUSH CURRENT: OPERATING TEMPERATURE: 20A MAX COLD START FOR 115VAC 0°C TO 40°C AMBIENT TEMPERATURE EFFICIENCY: STORAGE TEMPERATURE: 75% TYPICAL AT NOMINAL INPUT AND FULL LOAD -40° C TO 80° C SWITCHING FREQUENCY: HUMIDITY: 100 KHZ TYPICAL 0% TO 90% RELATIVE HUMIDITY OVER-VOLTAGE PROTECTION: NOTES: VOLTAGE LIMITED TO LESS THAN 130%, CROWBAR METHOD 1. -: ITE MODEL OR (M): MEDICAL MODEL OVER-CURRENT / SHORT CIRCUIT: 2. EACH OUTPUT CURRENT MAY VARY WITHIN IT'S DESIG- HICCUP MODE WITH AUTO-RECOVERY (110 - 130% OF RATED NATION RANGE, AS LONG AS OUTPUT POWER IS NOT LOAD), HICCUP MODE OUTPUT WILL AUTORECOVER UPON EXCEEDED. REMOVAL OF SHORT 3. SINGLE OUTPUT UNITS ARE AVAILABLE FROM 3.3V UP TO SAFETY APPROVALS: 48V IN 0.1V INCREMENTS. UL 60950 (THIRD EDITION), CUL TO 22.2 NO. 60950 (3rd ED.), 4. (X.X) OPTIONAL FOR SPECIFYING OUTPUT VOLTAGE TUV TO EN60950-1:2001, INNOVA-GS TO EN60335-1 PSE TO DEVIATION FROM STANDARD MODEL. SUBTRACTING X.X J60950, CHINESE CCC MARK TO GB4943-2001, GB9254-1998, VOLTS FROM STANDARD OUTPUT VOLTAGE. GB17625.1-2003; C-TICK TO AS/NZ 60950, CB REPORT SEE APPENDIX “E” FOR ELECTRICAL PERFORMANCE CURVES OUTPUT VOLTAGE / CURRENT: OUTPUT OUTPUT RATED MODEL VOLTAGE CURRENT OUTPUT NUMBER (VDC) (A) POWER (W) GT-21097-2003 +3.3 0 - 6.0 0 - 20 GT-21097-3005-1.0 +4.0 0 - 6.0 0 - 24 GT-21097-3005-X.X +5.0 0 - 6.0 0 - 30 GT-21097-4509-3.0 +6.0 0 - 5.0 0 - 30 GT-21097-4509-2.0 +7.0 0 - 5.0 0 - 35 GT-21097-4509-1.0 +8.0 0 - 5.0 0 - 40 GT-21097-4509-X.X +9.0 0 - 5.0 0 - 45 GT-21097-5012-2.0 +10.0 0 - 5.0 0 - 50 GT-21097-5012-1.0 +11.0 0 - 4.5 0 - 50 GT-21097-5012-X.X +12.0 0 - 4.17 0 - 50 GT-21097-5015-2.0 +13.0 0 - 3.8 0 - 50 GT-21097-5015-1.2 +13.8 0 - 3.6 0 - 50 GT-21097-5015-1.0 +14.0 0 - 3.5 0 - 50 GT-21097-5015-X.X +15.0 0 - 3.3 0 - 50 GT-21097-5018-X.X +18.0 0 - 2.8 0 - 50 GT-21097-5024-4.0 +20.0 0 - 2.5 0 - 50 GT-21097-5024-X.X +24.0 0 - 2.1 0 - 50 GT-21097-5048-20.4 +27.6 0 - 1.8 0 - 50 GT-21097-5048-18.0 +30.0 0 - 1.7 0 - 50 GT-21097-5048-12.0 +36.0 0 - 1.4 0 - 50 GT-21097-5048-X.X +48.0 0 - 1.1 0 - 50 SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE. CONSULT GLOBTEK CUSTOMER SERVICE FOR LATEST SPECIFICATIONS. 102 www.globtek.com ( +1.201.784.1000 GT-21097 SERIES-50W 0-50 Watts, DeskTop, Switchmode Universal Input, ISO 9001:2000 Single Output Family, ITE REGISTERED Part Number Ordering System (See Page 302) Output Plug/Cord Options (See Page 271) Medical Models (See Page 104) INDOOR USE ONLY ENCLOSURES UPPER HOUSING: HIGH IMPACT PLASTIC, 94V0 POLYCARBONATE, NON-VENTED, COLOR BLACK LOWER HOUSING: HIGH IMPACT PLASTIC 94V0 POLYCARBONATE, NON- VENTED, COLOR BLACK DESKTOP CLASS I: T3 SIZE: 119 X 60 X 32 + 1 mm INPUT CONFIGURATION: CLASS 1 MODEL IEC320 / C14, AC POWER RECEPTACLE WITH 3 MALE PINS GROUND PIN CONNECTED INTERNALLY BY AWG18 STRANDED HOOK-UP WIRE, GREEN W/YELLOW STRIPES JACKET, TO ‘Y’ SAFETY CAPACITORS COMMON. INDICATOR: GREEN LED, OUTPUT PRESENT ALTERNATE ENCLOSURE (SPECIAL ORDER): UPPER COVER: MATERIAL: 0.048 in THICK ALU- MINUM, GlobTek # 800-0202, SIDE(S) SCREENED, LOWER CHASSIS: GlobTek # 800-0203. KEYHOLE MOUNTING TABS (4), 4.75” CENTER SPACING. KEYHOLE: Ø 0.375 in , 0.188 in WIDE, & 0.60 in LONG. AC CORD CLIP AVAILABLE: SIZE: 152.4 x 105 x 86.4 + 1 mm SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE. CONSULT GLOBTEK CUSTOMER SERVICE FOR LATEST SPECIFICATIONS. ( +1.201.784.1000 www.globtek.com 103

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products