GESPAC PCISYS-58X
Datasheet
Extracted Text
PCISYS-58X EXTENDED TEMPERATURE Pentium CPU Board performance AGP Graphics with 4MB of fast VRAM), are available as well for the development phase through a DVI-I connector incorporating PanelLink® Digital technology (Silicon Image). The user can disable the graphics whenever extended temperature operations are required. GESPAC's PCISYS-58X is a Single Slot 3U CompactPCI® The 10Base-T/100Base-Tx Ethernet interface is CPU Board based on the rugged Intel Pentium® MMX implemented by using the Intel 82559ER controller while fanless processor running at 166MHz. Ideally suited for the dual USB 1.1, along with the on-board RTC, Watchdog systems requiring reliability and small, robust form factor, and Reset circuitry, is directly handled by the PCI to ISA the PCISYS-58X is a perfect fit for industrial embedded real bridge. The Intel 82439TX chipset takes care of the 512kB time machine control, industrial automation, Level 2 Cache memory and the SDRAM management. The transportation, defence and any other harsh environment 256kB of Flash EPROM boot are soldered on board. targeted applications. Standard PC interfaces are implemented through a PC/104 Keeping the flexibility of the 16-bit PC/104 extension port extended temperature mezzanine module (PCCEXT-58X), and an excellent performance to price ratio, the new which provides RS-232/485 standard 16Cx5x 1000V PCISYS-58X processor board is a real step ahead in the isolated COM1&2. For the development phase is always GESPAC's Intel based rugged CPUs road map, improving possible to use the development mezzanine module the overall performances of the existing rugged, railway referenced as PCCEXT-58 and which provides COM1 to 4, certified, STPC Industrial CPU board PCISTI-1. Key LPT1, keyboard, mouse and floppy disk. A standard IDE points of the new design are the low power & passive heat interface is available both on-board (adaptor needed) and sink operation capability along with the -40° to +85°C through the rear I/O J2 connector. industrial temperature operating range, assured by a 166MHz clocked Pentium low power processor. The PCISYS-58X's 4HP front panel includes status LEDs and standard connectors for dual USB, Fast Ethernet and In addition to all of the standard PC functions available for DVI-I. The PCISYS-58X is fully compatible with EMC the development phase, the PCISYS-58X board offers many regulations and with the CompactPCI® specifications extended temperature features including Fast Ethernet and PICMG™ 2.0 R3.0. The board handles a 32-bit 33 MHz dual USB. Flash Disk capability for high reliability data CompactPCI® Bus Access and 3.3V/5V signalling. storage up to 192+MB is also supported by using either the Ata-Disk-Chip or the Compact Flash technology (adaptor The PCISYS-58X is 100% PC compatible, allowing it to needed). One SO-DIMM socket allows the installation of run popular operating systems such as DOS, Window®9X, 128+ MB of SDRAM for optimum performance, while the WindowsNT™/00, Windows®CE, and Linux, as well as board boots on 256 kB of Flash EPROM. Analogue embedded Real Time operating systems such as VXWorks® monitor & Digital flat-panel display support (high and QNX®. Linux ® ™ Windows CE ® 266 600 Shaping Innovative Embedded Solutions Shaping Innovative Embedded Solutions 500 Technical features CPU • Fanless, Low Power processor Intel Pentium® MMX @166+MHz. - 40° to 85°C operating temperature • Intel 82439TX Chipset RJ-45 DVI-I Memory • 512 kB Level 2 pipelined burst cache memory • SO-DIMM memory module socket for 128+MB SDRAM • 256 kB soldered Flash EPROM Boot • 192+MB ATA-Disk-Chip IDE-Flash disk memory Fast Ethernet 2 x USB CRT & PanelLink/UXGA ( i ) • 192+MB ATA Compact Flash socket (adaptor needed) Video (i) • Analogue monitor & Digital flat-panel display support by Digital Visual Interface connector incorporating PanelLink® Digital technology (Silicon Image) • Asiliant M69030 AGP SVGA up to 1600x1200x16bpp high colour resolution with 4MB of integrated VRAM Magnetics TMDS PanelLink Ethernet controller • Intel 82559ER Ethernet Controller on PCI Bus Fast Ethernet • Fast Ethernet 10Base-T/100Base-Tx (10/100 Mbps) full-duplex Power up to Management. Peripheral ports 512 kB Voltage L2 Cache • Ultra ATA UDMA/33 IDE connector (adaptor needed) Temperature M 69030 Monitoring • Dual USB 1.1 Graphic Extended Temperature Controller Mezzanine • 232/485 standard 16Cx5x 1000V isolated COM1&2 (ii) Pentium • 16-bit PC/104 Extension Port Low Power COM 1 COM 2 166 MHz IDE isolated isolated CompactPCI® interface Extended • Single slot 3U format (100x160mm) • 3.3V/5V signalling system slot adapter PIIX4 E 82439 TX SouthBridge NorthBridge • Fully compliant with CompactPCI® Bus specifications ISA PICMG™ 2.0 R3.0 SO-DIMM • 32-bit 33 MHz CompactPCI® Bus Access BIOS PCI/PCI Bridge socket for • Full hot swap controller TI Microstar SDRAM 21050 • Secondary IDE/SMB signals, VIO, Vcc, +12V, +3.3V available through the rear I/O J2 connector cPCI 32-bit 33 MHz Rear I/O Additional features • Real Time Clock, Watchdog • Temperature management, monitor & protection • Phoenix BIOS (i) for development phase only. Can be disabled for extended temperature operations (ii)provided through the PC/104 development mezzanine module in extended temperature Order Information ZA PCISYS-58AXB9: Fanless cPCI 3U 4HP SBC with Intel Pentium-MMX LP @ 166MHz, -40° to +85°C operating temperature ZA PCISYS-58BXB9: Fanless cPCI 3U 4HP SBC without Video, with Intel Pentium-MMX LP @ 166MHz, -40° to +85°C operating temperature ZA PCCEXT-58X: PC/104 module with standard RS-232/485 16Cx5x 1000V isolated COM1&2 ZA EXTIDE-58: Standard IDE adaptor for ZA PCISYS-58/58X board ZA EXTCFL-58: Compact Flash memory adaptor for ZA PCISYS-58/58X board SO-DIMM memory module and ADC Flash Disk device on request www.gespac.com Shaping Innovative Embedded Solutions Headquarters North & South America France Germany Spain 18 Chemin des Aulx 574 East Alamo-Suite 40 Les Algorithmes Frauenstrasse 32 Travesera de Gracia, 62 1228 Geneva Chandler, AZ 85226 Bât. Epicure 80469 München Entresuelo 2a Switzerland 1-800-4-GESPAC (443-7722) 91194 Saint-Aubin Cedex Tel: +49 (0) 89 210 2370 08021 Barcelona Tel: +41 (0) 22 706 2100 Tel: +1 (480) 962 5559 Tel: +33 (0) 1 69 85 33 73 Fax: +49 (0) 89 210 23714 Tel/Fax: +34 93 414 25 02 Fax: +41 (0) 22 794 6477 Fax: +1 (480) 962 5750 Fax: +33 (0) 1 69 85 36 60 PCI Bus 32-bit 33 MhZ IDE SMBus Ref. XDF-PCISYS-58X R1.0 0151 All brands and product names are trademarks of their respective owners. IDE Flash Memory Micro IDE Compact Flash PC104 connector PC104 connector
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCISYS-58X have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods