GENERAL ELECTRIC CNIC-A2P

GE Fanuc Embedded Systems CNIC-A2P Dual Port ARINC 664 PMC Interface Features Architecture Advanced Software Support • AFDX/ARINC 664 dual port interface ( two inde- GE Fanuc Embedded Systems’ CNIC-A is a high The CNIC-A comes with all the software devel- pendent 10/100 MHz full duplex ports) performance interface for monitoring, generat- opment tools needed for user application ing or analyzing full-bandwidth AFDX/ARINC 664 development at no extra charge. The Cpcap, • Available as PMC, PCI and cPCI protocol traffic. GE Fanuc Embedded Systems’ packet capture library, provides a complete set of • 33/66 MHz, 32-bit PCI interface exclusive pipeline architecture maximizes packet functions for transmitting and receiving Ethernet • Includes AFDX and low-level Software throughput using parallel controllers and efficient frames. Frames from multiple ports can be logged Developer's Kit (SDK) at no additional charge. DMA transfers, thereby avoiding the bottlenecks or replayed using the open-source ntar log-file of CPU-based interface solutions. format. CFDX implements the ARINC 664/AFDX • Advanced reception features protocol stack including End Systems, redun- - 20 nsec time-tags Configurable as either one dual-redundant dancy management, Virtual Links, and Ports. An - IRIG-B synchronization AFDX/ARINC 664 interface or two independent advanced XML-based Configuration File format is - DMA transfer to host ports, users have complete access to all frame used to specify End Systems, and an AFDX-aware - Full throughput capability and header data. Each incoming packet is tagged version of Ethereal is included to provide GUI - Link level error detection with a 20 nsec resolution, 64-bit time-tag. Real analysis of logged files. • Advanced transmission scheduling time traffic generation is highly accurate. An - Highly accurate IRIG-B receiver/generator is included for synchro- - Flexible scheduling modes nization to external IRIG-B time sources and for - DMA transfer from host synchronizing multiple CNIC-A boards. In addition, - Full throughput capability I/O triggers, error detection/injection, BIT, and - Link level error injection link/protocol level statistics are provided. • Advanced software support - Flexible packet capture API AFDX/ARINC 664 Performance - AFDX / ARINC 664 API Multiple CNIC-As in the same PC have been bench- - XML configuration format marked at full bandwidth supporting all channels - Integrated log file format with 2000 VLs (Virtual Links), multiple Ports on - Berkeley packet filter engine each VL and minimum payloads (17 bytes). • Four bi-directional avionics level discretes • Input and output triggers per channel • Built-in test features CNIC-A2P Dual Port ARINC 664 PMC Interface Port Parameters Ethernet Frame Transmission Specifications • Full duplex IEEE 802.3 compliant ports • Ethernet frames transferred from host buffers via DMA • Software-selectable 10/100 Mbps data rates • Transmission scheduling with 20 nsec resolution Physical • Software-selectable auto-negotiation • Flexible scheduling modes • PMC mezzanine board • Software-selectable internal wrap - Minimum IFG delay (960 nsec between frames) • Available for PCI and 3U or 6U cPCI formats - Per-frame specified delays (multiple conditions) Ethernet Frame Reception - On external trigger Environmental • Ethernet frames transferred to host buffers via DMA - Playback delay modes • Commercial operating temp. range: 0°C to +70°C • Min-to-copy capability • Interrupt generation on user-identified frames • Optional temperature range: -40°C to +85°C • High resolution time-tagging with 20 nsec resolution • Relative humidity: 5 to 90% (non-condensing) • Link level error detection Transmit Statistics (64-bit counters) • Total packets transmitted Software Receive Statistics (64-bit counters) • Total bytes transmitted • Windows XP, 2000, 2003 and Linux support. Contact • Separate counters for Link level errors factory about availability of support for additional - Physical symbol Error Injection operating environments (including Linux, VxWorks - Invalid preamble symbol • Physical symbol error and LabVIEW). - Invalid or missing SFD • Preamble (symbol and length) errors • Cpcap API Library - Preamble length too short • Framing (byte alignment) error • CFDX API Library - Unaligned frame • SFD (Start frame delimiter) error • Ethereal GUI for ntar file analysis. - IFG too short • CRC error - Frame too short Connections - Frame too long Power (max.) • Two IEEE 802.3 compliant Ethernet RJ-45 connectors - CRC errors • +3.3 VDC: 950 mA • High density 15-pin D-sub connector for In/Out trig- • Total bytes received gers per port and four bi-directional avionics-level • Total count of error free packets received discretes • Total count of packets with errors received • Dropped packets PCI Signal Compatibility • Universal (5V or 3.3V) • 66/33 MHz PCI bus operation • DMA Tx/Rx data transfers Ordering Information • CNIC-A2PX (on a PCI carrier) is compatible with PCI-X 1.0 and PCI slots CNIC-A2P Dual port 10/100 full duplex PMC module for ARINC 664/AFDX support Timing Reference CNIC-A2PX • 64-bit time tag Dual port 10/100 full duplex PCI card (PMC on carrier) for ARINC 664/AFDX support • IRIG-B receiver (AM or TTL/DC) CNIC-A2P3 • IRIG-B generator (TTL/DC) Dual port 10/100 full duplex 3U CompactPCI card (PMC on carrier) for ARINC 664/AFDX support • IRIG-B PPS synchronization with time tag CNIC-A2PF • Software-selectable internal wrap Dual port 10/100 full duplex 6U CompactPCI card (PMC on carrier) for ARINC 664/AFDX support Triggering • Wait for external trigger to transmit • Output when marked frame is transmitted • Output when error-free packet received • Output when error packet received About GE Fanuc Embedded Systems GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.07 GFA-747