Data Sheet 4293, Issue 7, 09/10/10, Page 1 GLASS SUPPORTED DROP WIRE – 2 PAIRS Product Weight Length Packaging Number (Lbs/Kft) (Feet) 2090008 40 750 Reelex 2090010 40 1000 Coil 2090012 40 750 Coil 2090021 40 500 Reel Saver CORE CONSTRUCTION Conductors 22 AWG solid annealed copper Insulation Color-coded high density polyethylene Assembly 2 twisted pairs and rip cord placed parallel between the glass strength members The two twisted pairs are color coded as follows: Pair No. Tip Conductor Ring Conductor 1 White/Blue Blue 2 White/Orange Orange Jacket Black, flame retardant weather and abrasion resistant PVC compound extruded over core assembly APPLICATION(S) -Self supporting drop wire intended for aerial service connection to the subscriber -Compatible with “P” Clamp/Wedge type hardware -Glass strength member is lightweight, easy to install -No need for support wire grounding -Not affected by salt air and corrosive COMPLIANCE -Telecordia (Bellcore) Specification GR-3163-CORE -RDUP Bulletin 1753 F-204 -RoHS Compliant (effective 1/1/10 ) TEMPERATURE RATING -Storage and operation temperature range -45°C to 80°C-> -49°F to 176°F -Installation temperature range -30°C to 60°C-> -22°F to 140°F Data subject to change without notice. Data subject to change without notice. Contact your Customer Service Representative for latest information. Contact your Customer Service Representative for latest information. Toll free: (800) 424-5666, (859) 572-8000. www.generalcable.com Data Sheet 4293, Issue 7, 09/10/10, Page 2 ELECTRICAL CHARACTERISTICS PHYSICAL REQUIREMENTS DC Conductor Resistance: [max.] Cold Bend Ohms/mile @ 20˚C After aging for 7 days at 100± 2°C a sample of Individual Conductor 91.0 completed wire and a 5/8 inch mandrel are conditioned at -30± 2°C for four hours. DC Resistance Unbalance: [max.] Immediately after conditioning, the sample is Individual Pair Percent 5.0 bent four close turns around the mandrel at a Attenuation at rate of approximately sixty turns per minute. The 772 kHz: [max.] dB/kft @ 20˚C 5.1 insulation and jacket must show no cracks when 1 kHz Mutual Capacitance: [avg.] examined under normal vision. Nf/mile 83 ± 7 Flammability 1 kHz Capacitance Unbal. [max.] A sample of completed wire must be capable of pf/kft passing the VW-1 Flame Test per UL-1581. individual 80 Static Load Output to Output FEXT (min.) A sample of completed wire is held with two wire dB/Kft @ 150 KHz clamps having a one foot minimum separation -Worst Pair Combination 63 between the clamps and the wire. The wire is Input to Input NEXT (min.): extended beyond each clamp approximately dB @ 772 KHz six inches. This assembly, after being subjected to -Worst Pair Combination 48 a load of 365 pounds minimum for a period of twenty-four hours, must show no failures. After the Static Load Test the sample must withstand 10,000 VAC between conductor to conductor and conductor to clamps. PACKAGING TM -Available in Pull-Pac cartons (PP), coils (CL), reels (RL) and reelsaver (RS) -Glass Supported Drop Wire is supplied as specified in nominal lengths in Reelex payout boxes -Boxes are shipped on pallets covered by stretch or shrink wrapping material. Note: These telecommunications wire items have sequential markings Data subject to change without notice. Data subject to change without notice. Contact your Customer Service Representative for latest information. Contact your Customer Service Representative for latest information. Toll free: (800) 424-5666, (859) 572-8000. www.generalcable.com