GE Intelligent Platforms CT12 High Performance Single or Dual Core 6U CPCI Single Board Computer Features ® ® • Intel Core™ i7 and Core™ i5 processors The CT12 is a single slot 6U CompactPCI SBC with For telecom applications, the CT12 is equipped ® an integrated Intel Core™ i7 or Core™ i5 with IPMI 2.0 functionality. - Dual core, up to 2.53 GHz - Integrated memory interface, 1066 MHz processor plus QM57 peripheral controller hub. ® The assembly is fully compliant to the PICMG Supported operating systems for the CT12 include • Single slot 6U CPCI form factor ® ® ® specifications. Linux and Microsoft Windows as well as ® • PICMG compliant VxWorks. • Up to 8 Gbyte DDR3 SDRAM (dual channel) with The CT12 is able to host one Dual Core processor ECC in main memory (soldered components) with a core clock of up to 2.53 GHz. The assembly The CT12 is also available in an extended is ready to accept higher performance processor operating temperature version (-40° C to +75° C). • Up to 16 Gbyte NAND Flash (soldered) variants when introduced by Intel. The upper limit of the temperature range depends • Optional BIOS backup Flash on the selected processor version and the optional • User EEPROM Four banks of DDR3 SDRAM components are population with PMC or XMC mezzanines. provided on the CT12 for a maximum of 8 GBytes • Optional onboard SATA HDD of main memory with ECC. The module also hosts The CT12 is designed for use in a broad range of • Optional one or two PMC or XMC sites a 16 GByte soldered NAND Flash array through an applications such as telecom/communications, • Front I/O: IDE interface and may be provisioned with higher industrial control and automation, test, and - Two Gigabit Ethernet ports Flash ROM capacities when required for specific measurement systems, as well as server blade - VGA 2 applications. The onboard NAND Flash is an ideal applications. This, combined with a customer - One USB storage media to keep application specific data. specific assembly service, provides optimized price - One COM 3 and performance levels. The BIOS Flash is optionally backed with a second • Rear I/O: Flash device in order to recover the BIOS in the Please contact GE Intelligent Platforms for a - Two Gigabit Ethernet ports event the primary BIOS is corrupted. The Flash current list of processors and OS versions - VGA 1 device is large enough to optionally host supported on the CT12. - DVI 1 and 2 additional pre-boot applications, for example - Three SATA interfaces Built-In Test (BIT). - COM 1 and 2 ports - Four USB ports - GPIOs CT12 Safety and Reliability Benefits - PMC/XMC I/O signals ® Feature Benefit • Optional IPMI 2.0 PICMG 2.9 Soldered processor and memory Increased immunity against shock and vibration • Watchdog, temperature sensors ® • OS support: standard distribution Linux and ® Soldered NAND Flash drive Higher immunity against shock and vibration compared to Windows CompactFlash • Optional -40° C to +75° C operating BIOS Backup Flash Fast recovery when BIOS upgrade got corrupted temperature range Optional Built-In Test routines for platform integrity tests • Optional conformal coating HW Write Protect Protects onboard code and data against unauthorized write • Customization on request access CT12 High Performance Single or Dual Core 6U CPCI SBC Specifications Onboard Hard Disk or SSD Drive Processor - μFCBGA, Low Power Design • Optional internal 2.5" SATA hard disk or 2.5" • Scalable embedded processing power SATA Solid State Drive (SSD) • 32 nm process ® • Usage of SSD is recommended for high shock • Intel Core™ i7 processor, up to 2.53 GHz and vibration immunity as well as extended • Cache: Level 2 up to 4 MB, full speed temperature applications • Single and Dual core versions • Low power processor versions PMC/XMC Extension Slots ® • Intel Hyper-Threading technology (two • Optional as PMC or XMC extension slots threads per core) • Optional one or two extension slots ® • Intel Turbo Boost support • Extension slot 1: PMC (64-bit PCI, up to 133 in • Fanless cooling with heat sink PCI-X mode) or XMC with PCI Express x8 (Gen2, • Two PCI Express x8 ports 2.5 or 5.0 Gbit/s) • FDI and DMI interface to I/O Controller hub • Extension slot 2: PMC (64-bit PCI, up to 133 in PCI-X mode) or XMC with PCI Express x8 (Gen2, • Contact GE Intelligent Platforms for current 2.5 or 5.0 Gbit/s) processor versions • Extension slot 2 is not available in case a 2.5" Processor Speed L2 Memory storage device is installed IF MHz GHz MB • PCI signaling is 3.3V, with 5V tolerance when operated at 33 MHz i7-610E 2.53 4 1066 I5-520E 2.40 3 1066 Serial I/O • Two async. 16550 compatible full duplex serial CompactPCI channels • PICMG 2.0 R3.0 compliant CPCI local bus • High-speed transfer up to 115.2 kbaud with 16 standard byte FIFOs • 64-bit PCI for up to 8 slots (33 MHz) or 5 slots • User selectable RS-232/422/485 interface at (66 MHz) rear • Supports both system Host and Peripheral • COM3 RS-232 available at front via HarLink Mode in a single assembly connector • J1+2, 2 mm pin and socket connectors (IEC-1076-4-101) Video/Graphics Interface • Intel integrated 3D graphics controller I/O Controller Hub • One VGA port at front via HarLink connector • FDI and DMI interface to processor • One VGA port plus two TMDS (DVI-D) ports at • Supplies I/O interfaces/functions to front and rear I/O rear • Any two ports can be used for dual display • 8 PCI Express ports operation • Choice of four display channels • Fully compliant support for OpenGL™ for all Windows operating systems and Linux Main Memory Array • Dual channel DDR3 SDRAM array: 4 banks General Purpose I/O soldered memory components • 12 GPIO (input or output) pins • 144-bit wide with error correction (ECC) • Software configurable • Configurable capacity: 1 GByte to 8 GBytes • Hardware Write Protection of programmable devices Flash ROM Memory • Up to 16 GBytes NAND Flash USB Ports • Accessed by processor through IDE • One USB 2.0 connector on the front • Soldered down for high reliability • Two USB 2.0 channels on rear • Wear leveling Keyboard and Mouse Front Dual Gigabit Ethernet • Via USB ® • Twin Intel 82574L PCI Express Ethernet • Legacy PS/2 controller emulation controllers • 10/100/1000BaseT auto-negotiation Real-time Clock • Ordering option • RTC 146818 compatible • Li-battery Rear Dual Gigabit Ethernet ® • Twin Intel 82574L PCI Express Ethernet EEPROM controllers • 512 kbit serial EEPROMs for non-volatile user data • 10/100/1000BaseT auto-negotiation ® • Compliant to PICMG 2.16 CT12 High Performance Single or Dual Core 6U CPCI SBC Timer Styles • Integrated in Hub controller Style A F • Legacy PC-AT timer Ext. Temperature no yes • HPET High Precision Event Timer Conformal coating is a custom option. Watchdog Power Requirements • Super I/O • +5 V, +3.3V, +12V Temperature Sensors • -12V if required by mounted PMC module • CPU die and chipset die temperature software Power Allowances – PMC/XMC Slots readable in the range of –55°C to +125°C • +5 V, +3.3 V: Total power max. 7.5 W LED • ±12 V: 100mA each • Front panel ACPI system Status indicator LED Power Consumption - typical operating current (red/amber/green) • Without keyboard, hard disk, Windows, 3D • CompactPCI Hot swap (blue) on front panel graphics active, Gigabit Ethernet channels not active, measured at DOS prompt, no power Hot-Swap - compliant to PICMG 2.1 • Peripheral mode: full CompactPCI Hot Swap savings. 1 GB memory option. • System Host mode: CompactPCI ENUM# event Temperature support through ACPI or legacy driver • Note: Consult the User's Manual or GE Intelligent Platforms for additional detailed information on Front and Rear I/O (Transition Module CTM20) the operating temperature behavior of the Function Front Rear module. The CT12 operating temperature range is VGA 1 � influenced by processor type and speed, � operating altitude, and the type of cooling used in VGA 2 the host system. DVI 1 & 2 � • All values under typical conditions without COM 1 � � PMC/XMC module. COM 2 � � USB 1-4 Range Operating Storage USB 5 � Standard 0° C to +55° C –40° C to +85° C Ethernet 1,2 � Extended -40° C to +75° C –40° C to +85° C Ethernet 3,4 � 1 SATA 2 � SATA 3-5 � Operating Storage GPIO � Humidity 5 - 95% @ 40° C 5 - 95% @ 40° C LEDs � � Altitude 15.000 ft. (4.5 km) 40.000 ft. (12 km) � � PMC 1 / XMC 1 I/O PMC 2 / XMC 2 I/O � � Mechanical – PICMG 2.0 Reset � � • 6U, 1 slot wide, 233 mm x 160 mm x 20 mm with 1 If Flash ROM option is not used Flash drive or hard disk Altitude BIOS Features • Operating: Sea level to 15,000 ft. (4.5 km) • New AMI Aptio UEFI, in-system programmable Flash ROM • Storage: Sea level to 40,000 ft. (12 km) • CPU, memory and SATA auto- Shock and Vibration detection/selection • Designed to meet VITA47 class EAC1 and EAC3 • Integrated Ethernet PXE driver • USB mass storage support and booting MTBF capability (floppy, HDD, CDROM, and onboard • Prediction calculations are available in Flash ROM array) accordance with MIL-HDBK-217. Please contact • Password protection GE Intelligent Platforms. • Headless operation Safety IPMI 2.0 • Designed to meet standard UL1950, CE class A, FCC-A • Baseboard Management Controller supporting the Intelligent Platform Management Interface ® (IPMI) architecture in compliance with PICMG 2.9 • Peripheral mode and BMC mode are supported • IPMI is an optional function Software CT12 High Performance Single or Dual Core 6U CPCI SBC Block Diagram PC PCIe Ie x4 x4 PC PCI-X I-X P PC CI 66 MHz I 66 MHz CPCI Bus CPCI Bus Dual Dual Bridge Bridge Dua Dual l Int Inte el l® ® Ch Cha an nn ne ell 1066 M 1066 MH Hz z Channel Channel Co Core re i7, i5 i7, i5 PCI-X PCI-X PC PCI-X I-X DD DDR R3 3 PMC 1 PMC 1 PC PCIe Ie x x8 8 DDR3 DDR3 Br Bridge idge EC ECC C PC PCIe Ie x x4 4/x8 /x8 XM XMC 1 C 1 ECC ECC DVI DVI-I (r -I (r) ) 1x VGA (f 1x VGA (f) ) 1x VGA (r 1x VGA (r) ) DVI DVI-I (r -I (r) ) PC PCI- I-X X PC PCI-X I-X BIOS BIOS PMC 2 PMC 2 PC PCIe Ie x4 x4 B Br ridge idge XM XMC 2 C 2 LEDs/Powe LEDs/Power r PC PCIe x1 Ie x1 GbE GbE Gb GbE (f E (f) ) PC PCH H 1x U 1x US SB (f B (f) ) PC PCIe Ie x1 x1 GbE GbE GbE (f GbE (f) ) 4x U 4x US SB B (r (r) ) PCIe x1 PCIe x1 GbE GbE Gb GbE E ( (r r) ) 1x COM (f 1x COM (f) ) 2 2x x COM (r COM (r) ) P PC CIe x Ie x1 1 Gb GbE (r E (r) ) GbE GbE 3( 3(4 4) )x x S SA AT TA A I II I GP GPIO (r IO (r) ) SATA (r) SATA (r) (f) = (f) = F Fr ro on nt t Onb Onbo oa ar rd d On Onbo boar ard d Op Opt ti ion onal: PMC al: PMC/ /XMC XMC o or SATA r SATA IP IPMI MI (r (r) = R ) = Re ear ar Flash Flash SA SATA TA Ordering Information CT12AUF2K10A 6U cPCI PC, single slot, Core i7-610E 2.53 GHz, 4 GB DDR3, 4 GB NAND drive, 2x front GigE, 2x rear GigE, 2x SATA, VGA (front), COM (front), VGA (rear), 2x COM (rear), 2x USB (rear), 4x SATA (rear) CT12BUF2K10A 6U cPCI PC, single slot, Core i5-520E 2.4 GHz, 4 GB DDR3, 4 GB NAND drive, 2x front GigE,. 2x rear GigE, 2x SATA, VGA (front), COM (front), VGA (rear), 2x COM (rear), 2x USB (rear), 4x SATA (rear) CTM20A10A 6U I/O transition module for CT12 without onboard SATA drive with all onboard and face plate I/O ports. YLB-CR12-01 Front I/O COM port cable (appr. 200 mm), Harlink connector to serial connector YLB-CR12-02 Front I/O VGA port cable (appr. 200 mm), Harlink connector to VGA connector CR12-SDK-LINUX System Development Kit for Linux (Fedora 12, RHEL 5.4, Suse 11.2) VXW6-BCR12 VxWorks 6.x Board Support Package (BSP) VXW6-ECR12 VxWorks 6.x Board Support Package (BSP) and Extended Board Support Package (ESB) CR12-SDK-WIN System Development Kit for Windows XP, (planned Windows7) Operating Systems For detailed information and further options, contact GE Intelligent Platforms. About GE Intelligent Platforms GE Intelligent Platforms is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is headquartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Intelligent Platforms has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.ge-ip.com. GE Intelligent Platforms Information Centers Additional Resources Americas: For more information, please visit the 1 800 322 3616 or 1 256 880 0444 GE Intelligent Platforms web site at: Asia Pacific: +81 3 5544 3973 www.ge-ip.com EMEA: Germany: +49 821 5034 0 UK: +44 1327 359444 ©2010 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective 01.10 GFA-draft3 NDA Required holders. Specifications are subject to change without notice.