GE Intelligent Platforms XVR14 nd ® 2 Generation Intel Core™ i7 Based Rugged VME Single Board Computer Features The XVR14 Rugged Single Board Computer The XVR14 is designed to meet the requirements • Single slot 6U VME Single Board Computer (SBC) from GE Intelligent Platforms features the of a wide range of applications from industrial • 2nd Generation Intel Core i7 dual and quad nd high performance, highly integrated 2 through to fully rugged Defense and Aerospace core processors Generation Core i7 processor platform from programs. It offers extended temperature • Integrated two channels up to 16 GB soldered Intel. capability and a range of air and conduction DDR3 SDRAM with ECC cooled build levels. nd 2 Generation Core i7 offers integrated • Up to 6 MB shared cache graphics and memory controller plus dual and A rich software choice is planned for the XVR14, • Up to 8 GB NAND Flash (soldered) quad core processing up to 2.5 GHz all in one including comprehensive Deployed Test Software • Dual on-board Expansion Sites: two PCI-X PMC device. Coupled with the Mobile Intel QM67 (BIT and BCS) plus OS support for Windows 7, and two x8 PCIe XMC Express Chipset this provides an unmatched Open Linux, Wind River Linux, VxWorks®. • Front I/O: level of I/O bandwidth for both on-board and - 2x Gigabit Ethernet ports off-board functions. Specifications - 1x VGA - 1x USB port Processor nd Features of the 2 Gen. Core i7 processor nd - 1x COM port • Intel 2 Gen. Core i7 Processor, options include • Intel Intelligent Power Technology allows • Rear IO: but are not limited to processors to operate at optimal frequency - 2x Gigabit Ethernet ports (VITA 31.1) - i7-2715QE (Quad core) @ 2.1 GHz (45W) and power. - 1x SDVO/VGA (2 ports possible if front IO not - i7-2655LE (Dual core) @, 2.2 GHz (25W) • Advanced Vector Extensions (AVX) signal required) - i7-2610UE (Dual core) @, 1.5 GHz (17W) processing - 2x DVI (Actual speed/power is dependent on - Intel's AVX doubles the vector register size - Up to 4x SATA ports environment) from 128 to 256 bits for up to a 2x FLOP - 2x COM ports • 32nm monolithic die processing technology - 2x USB ports improvement • Last Level Cache • Intelligent performance on-demand with - 1x Audio - 6 MB (Quad i7) Intel Turbo Boost Technology - 12x GPIO - 4 MB (Dual i7) - 2x PCI-X PMC I/O • Multi-level shared cache improves SDRAM performance and efficiency by reducing - 2x x8 PCIe XMC I/O • Maximum memory configuration of dual latency to frequently used data • BIOS backup Flash channels up to 16 GB DDR3 SDRAM soldered • Hyper-Thread Technology – 2 threads per • Optional on-board SATA HDD with ECC core • Optional conduction cooling Flash Memory • Optional extended operating temperature • Soldered NAND flash array up to 8 GB In addition to a comprehensive range of range BIOS onboard I/O features, the XVR14 also offers two • Deployed Test Software • 1x 16 Mb for BIT and BIOS plus 1x 16 Mb for on-board mezzanine expansion sites for • Windows®, Linux® and Real-Time OS support redundancy enhanced system flexibility, both of which offer PMC and XMC capability. Memory resources include up to 16 GB DDR3 SDRAM, 8 GB NAND Flash, optional SATA hard drive, BIOS Flash and BIOS backup Flash. nd XVR14 Intel 2 Generation Core i7 Based Rugged VME Single Board Computer Specifications (continued) Block Diagram Ethernet • Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to front panel • Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to rear USB Ports • Two USB 2.0 ports routed to rear P2 connector • One USB 2.0 port routed to front panel VME Backplane Interface 2eSST capable via TSi148 (ANSI/VITA 1.5-2003 • offering bandwidths up to 320 MB/s) Serial Ports • Three 16550 compatible full duplex async serial ports • One routed to front panel RS-232 (COM3) • Two routed to P2, with user selectable RS- 232/422/485 • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud PMC/XMC Expansion • Up to two on-board mezzanine expansion sites - Site 1 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x8 PCIe Gen 2) capable; routed to P2 - Site 2 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x4 PCIe Gen 2) capable; routed to P0 • PCI signaling is 3.3V, 5V tolerant; +/- 12V mezzanine only 25W per site capable mezzanine power supply • Audio • High Definition Audio Codec • Stereo line in and stereo line out Video • One VGA port routed to front panel LED (not in conduction-cooled style) Temperature Sensor • One SDVO/VGA port routed to P2; can be two ports if • 3x status LEDs and four BIT status on front • Onboard ambient temperature; CPU front I/O not used) panel Other HW Features • Two DVI ports routed to rear I/O P0/P2 • Two status LEDs on rear • Hardware Write Protection SATA Power Requirements • Front power button LED • Four SATA ports to rear I/O ; two on-board; one • +5, +3.3V • IPMI 2.0 Controller (PICMG 2.9) SATA/PATA • +12V for mezzanine only Transition Module GPIO MRAM/ Watchdog/ Real-Time Clock/ TPM VTM24 • 12 GPIO pins – software configurable • • 512 kB non-volatile RAM (MRAM) Certification On-board Hard Drive • SuperIO watchdog • CE • Real-time clock in Cougar Point PCH • SATA hard drive or SSD can be optionally ordered (precludes use of PMC/XMC site 2) Environmental Level 1 Level 2 Level 3 Level 4 Level 5 Cooling Method Convection Convection Convection Conduction Conduction Conformal Coating Optional Standard Standard Standard Standard High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall 2 2 2 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g /Hz** Shock 20g*** 20g*** 20g*** 40g*** 40g*** *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact defense.ge-ip.com ©2011 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 07.11 GFA-1786