GE Intelligent Platforms XVP14 nd ® 2 Generation Intel Core™ i7 Based Dual Slot Rugged VME Single Board Computer Features The XVP14 Rugged Single Board Computer The XVP14 is designed to meet the requirements • Dual slot 6U VME Single Board Computer (SBC) from GE Intelligent Platforms features the of a wide range of air cooled industrial and • 2nd Generation Intel Core i7 dual and quad nd high performance, highly integrated 2 Defense and Aerospace applications, with core processors Generation Core i7 processor platform from extended temperature range offered as an option. • Integrated two channels up to 16 GB soldered Intel. Its dual slot format allows an on board DDR3 SDRAM with ECC A rich software choice is planned for the XVP14, hard drive to be added without using up one of including comprehensive Deployed Test Software • Up to 6 MB shared cache the mezzanine sites. (BIT and BCS) plus OS support for Windows 7, • Up to 8 GB NAND Flash (soldered) nd ® 2 Generation Core i7 offers integrated Open Linux, Wind River Linux, VxWorks . • Dual on-board Expansion Sites: two PCI-X PMC graphics and memory controller plus dual and and one x8 PCIe XMC quad core processing up to 2.5 GHz all in one • Front I/O: Specifications device. Coupled with the Mobile Intel QM67 - 2x Gigabit Ethernet ports Processor Express Chipset this provides an unmatched nd - 1x VGA • Intel 2 Gen. Core i7 Processor, options include level of I/O bandwidth for both on-board and - 1x USB port but are not limited to off-board functions. - 1x COM port - i7-2715QE (Quad core) @ 2.1 GHz (45W) • Rear IO: - i7-2655LE (Dual core) @, 2.2 GHz (25W) nd Features of the 2 Gen. Core i7 processor - 2x Gigabit Ethernet ports (VITA 31.1) - i7-2610UE (Dual core) @, 1.5 GHz (17W) • Intel Intelligent Power Technology allows - 1x SDVO/VGA (2 ports possible if front IO not (Actual speed/power is dependent on processors to operate at optimal frequency required) environment) and power. - 2x DVI • 32nm monolithic die processing technology • Advanced Vector Extensions (AVX) signal - Up to 4x SATA ports • Last Level Cache processing - 2x COM ports - 6 MB (Quad i7) - 2x USB ports - Intel's AVX doubles the vector register size - 4 MB (Dual i7) from 128 to 256 bits for up to a 2x FLOP - 1x Audio SDRAM improvement - 12x GPIO • Maximum memory configuration of dual - 2x PCI-X PMC I/O • Intelligent performance on-demand with channels up to 16 GB DDR3 SDRAM soldered Intel Turbo Boost Technology • BIOS backup Flash with ECC • Multi-level shared cache improves • On-board SATA HDD Flash Memory performance and efficiency by reducing • Optional extended operating temperature • Soldered NAND flash array up to 8 GB latency to frequently used data range BIOS • Hyper-Thread Technology – 2 threads per • Deployed Test Software • 1x 16 Mb for BIT and BIOS plus 1x 16 Mb for core ® ® • Windows , Linux and Real-Time OS support redundancy In addition to a comprehensive range of onboard I/O features, the XVP14 also offers two on-board mezzanine expansion sites for enhanced system flexibility. Memory resources include up to 16 GB DDR3 SDRAM, 8 GB NAND Flash, SATA hard drive, BIOS Flash and BIOS backup Flash. nd XVP14 Intel 2 Generation Core i7 Based Dual Slot Rugged VME Single Board Computer Specifications (continued) Block Diagram Ethernet • Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to front panel • Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to rear USB Ports • Two USB 2.0 ports routed to rear P2 connector • One USB 2.0 port routed to front panel VME Backplane Interface 2eSST capable via TSi148 (ANSI/VITA 1.5-2003 • offering bandwidths up to 320 MB/s) Serial Ports • Three 16550 compatible full duplex async serial ports • One routed to front panel RS-232 (COM3) • Two routed to P2, with user selectable RS- 232/422/485 • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud PMC/XMC Expansion • Up to two on-board mezzanine expansion sites - Site 1 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x8 PCIe Gen 2) capable; routed to P2 - Site 2 PMC (PCI-X up to 64-bit /133 MHz, x8 PCIe Gen 2 capable); routed to P0 • PCI signaling is 3.3V, 5V tolerant; +/- 12V mezzanine only 25W per site capable mezzanine power supply • Audio • High Definition Audio Codec • Stereo line in and stereo line out Video • One VGA port routed to front panel Environmental Temperature Sensor • One SDVO/VGA port routed to P2; can be two ports if • Onboard ambient temperature; CPU Level 1 Level 2 front I/O not used) MRAM/ Watchdog/ Real-Time Clock/ TPM • Two DVI ports routed to rear I/O P0/P2 Cooling Method Convection Convection • 512 kB non-volatile RAM (MRAM) SATA • SuperIO watchdog Conformal Coating Optional Standard • Four SATA ports to rear I/O ; two on-board; one • Real-time clock in Cougar Point PCH SATA/PATA High/Low Temp 0 to +55° C -20 to +65° C Certification GPIO CE • Operational (300 ft/m) (300 ft/m) 12 GPIO pins – software configurable • Other HW Features 2 2 Random Vibration 0.002g/Hz* 0.002g /Hz* On-board Hard Drive • Hardware Write Protection • SATA hard drive or SSD • Front power button LED Shock 20g*** 20g*** IPMI 2.0 Controller (PICMG 2.9) LED (not in conduction-cooled style) • • 3x status LEDs and four BIT status on front panel Transition Module *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 • Two status LEDs on rear • VTM24 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration Power Requirements • +5, +3.3V • +12V for mezzanine only About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at defense.ge-ip.com/contact defense.ge-ip.com ©2011 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 07.11 GFA-xxx