GE Intelligent Platforms VR9 High-performance, Rugged 6U VMEbus Embedded Computer The VR9 is a 6U VMEbus all-in-one CPU within a single slot gives users the freedom Features board with integrated low power gigahertz to use the PMC interfaces as extensions for ® ® • Intel Pentium M processor, 600 MHz processor speed and dual Gigabit Ethernet their applications. This combined with a to 1.6 GHz channels compliant to VITA 31.1-2003. custom specific assembly service provides • Ultra compact, 1 slot only or 2 slot with The VR9 is designed to meet the needs of optimized price/performance for all kinds of front panel I/O embedded application developers addressing OEM applications. • Compliant to IEEE Std. 1101.2-1992 & markets like industrial automation, medical, ANSI/VITA 20-2001 Versions with front panel I/O are available in scientific, imaging, telecommunication, various configurations with and without PMC • Extensive Software Support military and aerospace. support. Rugged needs are addressed with • Up to 2GB DDR SDRAM (200) with ECC Based on the Intel Pentium M processor optional conduction cooling and extended • Flash Drive up to 1 GB or local 2.5” hard disk (0.13 chip technology), the VR9 platform is temperature range of up to -40° to +65° C, • VGA/LCD up to 2048 x 1536, 16/32 MB DDR designed to support processors starting with increased shock and vibration immunity SDRAM 600 MHz up to 1.6 GHz. It offers low power using stiffener bars and wedge locks, and consumption and eliminates the need for on- conformal coating. The conduction cooled • Two Gigabit Ethernet ports10/100/1000 board ventilation. VR9 is compliant to the specifications IEEE BaseT front or rear optional Std. 1101.2-1992 and ANSI/VITA 20-2001. • Compliant to VITA 31.1-2003 The VR9 provides a unique feature set, • Two PMC extension slots, one 64-bit/66 including up to 2 GB DDR SDRAM (200) with Special features include two serial channels MHz and one 32-bit/33 MHz ECC, three independent on-board PCI buses, with flexible RS-232 or RS-422/485 interfac- • Ultra ATA/100 onboard, second channel support for the VME64x backplane, two PMC ing and LCD controller. Supported operating ® ® mixed with PMC32/33 rear I/O interfaces (64-bit/66 MHz and 32-bit/33 MHz). systems are Microsoft Windows 2000, ® High level of functional integration (VGA/TFT, Microsoft Windows XP, QNX, VxWorks , • 2x serial I/O with FIFOs RS-232/422/485 ® ® Gigabit Ethernet, serial interfaces, etc.) LynxOS, Linux and others. interface • USB 2.0 ports one front, 2 rear • Watchdog, temperature sensor • Optional –40°/+65°C • Conduction cooling • High shock and vibration immunity with stiffener bars and wedge locks • Conformal coating • Custom specific, low cost assembly versions • RoHS compliant with version 3.x VR9 High-performance, Rugged 6U VMEbus Embedded Computer PMC Extension Slots - IEEE P1386/1386.1 EIDE Specifications • Compliant to ANSI/VITA 20-2001 (conduction • Ultra ATA/100 sync. DMA mode up to 100 MB/sec cooled only) • PIO mode 4 and bus master IDE up to 16 MB/sec VME64 - Tundra Universe IID • One high bandwidth 64-bit/66 MHz PMC and • Industry standard CA91C142D PCI to VMEbus controller • Two devices supported via local EIDE connector and one 32-bit/33 MHz PMC interface two devices alternative with PMC32/33 rear I/O • Full VMEbus system controller • Enhancement to processor PMC standard • FIFOs for write posting, DMA controller with linked General Purpose I/O VITA 32-2003 (non-monarch) list support • 8 bits general purpose I/O • Cardbus adapter available on PMC2 • Master/slave transfer modes: BLT, ADOH, RMW, • Multiplexed with DVI output Note: The 32-bit/33 MHz PMC slot is not available LOCK, RETRY with VGA or Ethernet on the front, IDE secondary • A32/A24/A16 and D64(MBLT)/D32/D16/D8 USB 2.0 installed • Geographical Addressing • One USB 2.0 connector at front Note: PMC front I/O is not supported with VR9 in • Two universal serial bus channels at rear Processor - µFCBGA, Low Power Design conduction cooled version • Scalable processing power with flexible Keyboard and Mouse Serial I/O - RS232/422/485 processor design • PS/2 compatible • Two async. 16550-compatible full-duplex serial • Intel Pentium M processor: 1.4 GHz to 1.8 GHz channels at rear I/O Real-time clock • Intel Celeron M processor: 1.0 GHz to 1.3 GHz • High-speed transfer up to 115.2 kbaud with • RTC 146818 compatible, on-board Li-battery • High efficiency on-board switching regulator (DC/ 16 byte FIFOs DC) CMOS RAM • User selectable RS232/422/485 interface • Fanless cooling with heatsink • 242 bytes non-volatile CMOS RAM • COM1 optional available at front • Contact factory for latest CPU versions EEPROM ® ™ VGA and LCD – NVIDIA GeForce 4 410/420 Go Chipset – Intel E7501/P64H2/ICH4 • 512 Kbit serial EEPROM for non-volatile user data (VR9 board version 2.x only) • 400 MHz system bus to processor • 256-bit 3D and 2D graphics accelerator Watchdog • PCI burst mode transfers up to 512 MB/s • On-chip 32 MB frame buffer (66-190 MHz) • Watchdog 1: 4.8 sec to 76 sec, 0.6 sec increments (64-bit/66 MHz) • 32-bit/66 MHz PCI interface • Watchdog 2: 1 min to 255 min, 1 min increments • Two 64-bit wide PCI buses with 66 MHz • Dual CRTC/Simultaneous Dual Display • User programmable • One 32-bit wide PCI bus with 33 MHz • 350 MHz Palette-DAC for analog VGA (up to Timer Cache Level 1 Level 2 1600 x 1200) • Activates IRQ under software control • DVI-I interface (PanelLink) for TFT displays up to Pentium M (90 nm) 32 KB 2048 KB, full speed (200 µsec - 20 msec) 1024 x 1200, single channel DVI (165 MHz), EDID Pentium M (130 nm) 32 KB 1024 KB, full speed display PnP supported Temperature Sensor Celeron M (90 nm) 32 KB 512 KB, full speed • Fully compliant support for OpenGL 1.2 for all • CPU die software readable from –65°C to +127°C, supported Windows operating systems and Linux Celeron M (130 nm) 32 KB 512 KB, full speed 1°C increments and 3 board, heatsink, card edge temperature sensors VGA and LCD - ATI MOBILITY RADEON Memory – DDR 200 (VR9 board version 3.x only, RoHS version) • High-speed registered DDR SDRAM LED • 128/256-bit 2D, 3D and multimedia graphics • 72-bit wide with error correction (ECC) • Front panel LED System control accelerator • 512 MB to 2 GB with soldered chips BIOS Features • Local DDR memory (16 MB or 64 MB) @125 MHz to 200 MHz • New AMI BIOS Core 8, in-system programmable Dual Gigabit Ethernet – Intel 82546EB Flash ROM • Highly integrated Dual Channel Ethernet Controller • 32-bit/66 MHz PCI interface with 64-bit/66 MHz PCI local bus DMA • CPU, memory and IDE auto-detection/selection • Dual independent CRT controllers to support two asynchronous simultaneous display paths • Integrated VGA, and Ethernet BIOS ROM • 64 KB Transmit and Receive FIFO • 10/100/1000BaseT auto-negotiation • RAMDOC (300 MHz to 400 MHz) for analog VGA • USB Mass Storage support and booting capability (1600 x 1200) (Floppy, HDD, CDROM) • Versions with front I/O available • TDMS transmitter up to 165 MHz • Password protection, BIOS post, system and video • Rear Ethernet: VITA 31.1-2003 compliant (1024 x 768 at 60 Hz); DVI BIOS shadowing Hard Disk or Flash Drive • Full support of OpenGL 1.3 (Windows) and • Extensive setup with remappable serial/parallel ports • Internal 2.5” IDE hard disk or 2.5” flash drive (for xFreeX86 (Linux) • Operation without disk, keyboard and video extended temperature range and higher shock/ • Support for DirectX 6.0 to DirectX 8.1 under Windows • Remote BIOS through serial port vibration immunity) VR9 High-performance, Rugged 6U VMEbus Embedded Computer Styles Temperature Software NOTE: For detailed information about the operating • The following software is supported to the extent Non-RoHS C I R N listed below. temperature behavior of any style board, it is RoHS 1 3 6 8 absolutely necessary to consult the manual. The OS On Request Planned processor type, speed, altitude the use or not of Front Panel yes yes yes no Ethernet and video, ambient conditions, and the type WIN XP - 3 Front Stiffener no no no yes of cooling influence the board temperature range. QNX 6 - 3 Middle Stiffener no no yes yes • Temperature - air cooled VxWorks - 3 All values under typical conditions w/o PMC module, Wedge Locks no no no yes Lynx OS 3 - HDD or flash drive Parts Soldered yes yes yes yes Linux - 3 Operating Storage Li-Battery yes yes no no Standard 0°C to +70°C –40°C to +85°C Extended Temp. no yes yes yes Front and Rear I/O (with transition module VTM21) Extended –40°C to +85°C –40°C to +85°C • The pinouts of the transition module connectors Conformal Coating no no yes yes (rear I/O) corresponds to standard PC connectors Conduction Cooled no no no yes • Temperature – conduction cooled (press-fit cables). • Values under typical conditions w/o ccPMC module, Power Requirements Function Front Rear HDD and flash drive • +5 V, +3.3 V – required Air Cooled P2/P0 Operating Storage • ±12 V – if required by mounted PMC module *5 DVI-I - 3 Extended –40°C to +85°C –40°C to +85°C Power Consumption - typical operating current *3 *1 VGA 3 3 • Without keyboard, hard disk, modules, Ethernet (no Humidity *2*3 *2 Eth 1 3 3 link), measured at DOS prompt, no power savings Operating Storage *2*3 *2 Eth 2 3 3 Processor, Memory 5V 3.3V Total Power 5 - 95% @ 40°C 5 - 95% @ 40°C Keyb+Mouse 3 3 1.0 GHz, 1 GB 1.8 A 5.9 A 28.5 W Reset 3 3 Altitude 1.3 GHz, 1 GB 2.2 A 5.9 A 30.5 W Operating Storage LEDs 3 3 1.4 GHz, 2 GB 2.0 A 5.9 A 29.5 W USB 2.0 1-3 3 1-2 15.000 ft. (4.5 km) 40.000 ft. (12 km) 1.6 GHz, 2 GB 2.7 A 5.9 A 33.0 W IDE primary - 3 1.8 GHz, 2 GB 2.5 A 5.9 A 32.0 W • Vacuum for conduction cooled board (style N or 8) *3 IDE secondary onboard - Shock (3 axis, up & down, 5 hits/direction) • Without keyboard, hard disk, modules, Windows XP, COM 1-2 1 1, 2 • Style (C, I, 1, 3) 12g / 6 ms 3D graphics active. Both Gigabit Ethernet channels *5 GPIO (8 pins) - 3 linked, CPU running at instruction mix for maximum • Style (R, 6) 20g / 6 ms, 3 axis PMC 64-bit/66 MHz 3 3 power consumption. • Style (R, 6) 100g / 6 ms, 40g / 11 ms *3 *3*4 PMC 32-bit/33 MHz 3 3 Processor, Memory 5V 3.3V Total Power Vibration (30 minutes each axis) *1 Rear DVI-I connector for DVI and VGA 1.0 GHz, 1 GB 2.4 A 7.5 A 36.8 W • Style (C, I, 1, 3) 2g rms @ 5 to 100 Hz *2 Either front or rear as an order option • Style (R, 6) 2g rms @ 5 to 2000 Hz *3 1.3 GHz, 1 GB 4.6 A 7.5 A 47.8 W The 32-bit/33 MHz PMC slot is not available with VGA or • Style (R, 6) 14g rms @ 5 to 2000 Hz Ethernet on the front, IDE secondary installed 1.4 GHz, 2 GB 2.7 A 7.5 A 38.3 W *4 Full PMC (32-bit/33 MHz) rear I/O without IDE primary Partly MTBF 1.6 GHz, 2 GB 5.4 A 7.5 A 51.8 W PMC (32-bit/33 MHz) rear I/O with IDE primary • Calculations are available in accordance with *5 1.8 GHz, 2 GB 4.8 A 7.5 A 48.8 W DVI-I (DVI-D pins) are shared with GPIO pins MIL-HDBK-217. Please contact GE Intelligent Platforms. Power Allowances - PMC slot Safety • +5 V, +3.3 V Total power max. 7.5 W • Designed to meet standard UL1950, CE class A, FCC-A • ±12 V 100 mA each Mechanical • 6U, 1 slot wide, (233 x 160 x 20 mm) including flash drive • Compliant to IEEE Std. 1101.2-1992 for conduction cooled board VR9 High-performance, Rugged 6U VMEbus Embedded Computer Block Diagram DDR SDRAM with ECC 2 GB PMC2 ICH4 PCI / VME Pentium M E7501 Processor PMC1 PCI 64-bit 133 P64H2 MHz VGA / DVI Gigabit Gigabit Ethernet 2 Ethernet 1 Ordering Information Hardware Accessories VTM21 I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) SCC78UM05VR9 VR9 starter cage, 19”, 7U, 84HP, VME64 slots, fans, HDD and DVD ZKADVI2VGA DVI-I to VGA DSUB HD15 adapter ZKAAPS2SPLIT Cable for keyboard and mouse on front panel Operating Systems Extensive operating systems support is available (see page 2). Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Intelligent Platforms. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-772A SMBus EIDE PCI 64-bit 66 MHz USB Super I/O PCI 32-bit 33 MHz VMEbus