VR7 VR7 ™ ® Block Diagram Single Slot Celeron /Pentium III PC 6U VMEbus Embedded Computer Features ™ • Celeron 300 to 566 MHz ® • Pentium III 500 to 850 MHz • Low power mobile CPUs • Ultra compact, 1 slot only ® • Embedded NT, Windows 98, ® Windows 2000, ® Windows NT , QNX, ® ® VxWorks , MS-DOS • Up to 512 MB SDRAM with ECC • 1.8“ FlashDrive up to 512 MB • VGA/LCD up to 1600x1200 4(2) MB high-speed SDRAM • Fast Ethernet 10/100 Mb • MIL-STD-1553 • SCSI up to 20 MB/s TM ® VR7 is a 6U VMEbus all-in-one Celeron /Pentium III single board computer designed • Ultra ATA/33 to meet the needs of embedded application developers addressing markets like industri- Ordering Information al automation, medical, scientific, imaging, telecommunication, military and aerospace. • PMC extension slot • Four serial I/O with FIFOs Hardware Accessories VMEbus Software The ultra compact single slot, all-in-one design with flexible processor and memory VTM1 I/O transition module for VME-64x backplanes DOS-VME VME driver for MS-DOS RS-232/422/485 interface configurations, and an impressive array of on-board peripherals includes video interface, YPF01VM0C Front-panel 3U/4TE, with reset, LED, VGA, key- W98-VME VME-DLL and I/O driver for Windows 98 Ethernet, SCSI, optional MIL-STD-1553, and PMC extension. This combined with a cus- • Two IEEE 1284 parallel ports board, mouse, speaker, two USB1, for VTM1 WNT-VME2 VME-DLL and I/O driver for Windows NT tom specific assembly service provides optimized price/performance for all kinds of OEM SC304F Floppy disk 3.5”,19” box: 3U/4TE cable QNX-VME VMEbus driver for QNX • Two USB connectors applications. SC306HI10G0 IDE hard disk 3.5”,10 GB,19” box: 3U/6TE cable VxWorks see Operating Systems YLBCOM304A Ribbon cable for 2x COM, 3U/4TE front-panel Operating Systems • Watchdog, NMI ticker, YLBVGA304B Flat cable for VGA & 2x COM,3U/4HP front-panel Rugged needs are addressed with optional conduction cooling and extended temperature DOS-MD600x MS-DOS operating system temperature sensor YLBLPT308A Flat cable for LPT, Ethernet (RJ45), keyboard & range of up to -40˚ to +85˚ C, increased shock and vibration immunity using stiffener bars WIN-98xC Windows 98 operating system mouse (2x miniDIN), 3U/8TE front-panel WIN-NT4xC Windows NT 4.x operating system • Single +5 volt supply only and wedge locks, and conformal coating. Chassis WIN-2000xC Windows 2000 operating system SCC784TM05VR7 QNX-11252 QNX4 operating system • Optional -40˚/+85˚ C Special features include four serial channels with flexible RS-232 or RS-422 interfacing, Starter cage: 19”, 7U, 84TE card cage, 5x 6U VME-64 slots; QNX-11294 QNX4, Photon microGUI ® LCD controller and single +5V supply. Supported operating systems are Windows 2000, • Conduction cooling 3x fan, 250W power supply +3.3V/12A, +5V/22A, +12V/7A, VXW-BVX7 VxWorks board support package, Tornado 1 ® ® ® ® ® ® Windows NT , Windows 98, QNX, VxWorks , LynxOS , Linux , MS-DOS and others. -5V/0.3A, -12V/0.8A, EMC, CD-ROM, 3.5” floppy drive, (without SCSI driver, with VMEbus driver) • High shock and vibration 10 GB hard disk, I/O transition module (VTM11) with front panels VXW2-BVX7 VxWorks board support package, Tornado 2 (YLBCOM304A, YLBVGA304A, YLBLPT308A), 0˚C/+50˚ C, (with VMEbus driver) immunity with stiffener bars use for VR76xxxx-xxxx and VR78xxxx-xxxx only WIN-ENT4xE Windows Embedded NT 4.x and wedge locks Special chassis, supplies, backplanes and drives upon request. • Conformal coating 6301 Chapel Hill Road, Raleigh, NC 27607-5115 • Custom specific, low cost Tel 919.851.1101 • Fax 919.851.2844 • info.government@sbs.com • www.sbs.com assembly versions Memminger Str. 14, D-86159 Augsburg Germany Tel +49 (821) 5034-0 • Fax +49 (821) 5034-119 • info.government@sbs.com • www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2002 SBS Technologies, Inc. 20020423 embedded computing preferred… SINGLE BOARD COMPUTERS AND CPUS Specifications SCSI - SYM 53C860 Power Allowances - PMC Slot Humidity • SCSI controller with PCI local bus DMA • +5V, +3.3V: total power max. 7.5W • Operating: 5% to 95% @ 40˚C, 15,000 ft (4.5 km) altitude • SCSI transfer speed up to 20 MB/s • ±12V: 50 mA each • Storage: 5% to 95% @ 40˚C, 40,000 ft (12 km) altitude VME64 - Tundra Universe IIB • Active low power termination on-board • Industry standard CA91C142B PCI to VMEbus controller Power Consumption Shock and Vibration (C-, I-, E-, R-style) • Up to 60-70 MB/s transfer rate (64-bit MBLT, coupled transfer, EIDE • Typical current +5 Volt, 128 MB RAM without keyboard, • C-, I-style: 12g / 6ms, 2g @ 5Hz to 100Hz rms transfer rate depends on slave access speed) • Ultra ATA/33 sync. hard disk, modules, etc. • E-, R-style: 20g / 6Ms, 2g @ 5Hz to 2000Hz rms • Full VMEbus controller FIFOs for write posting • DMA mode up to 33 MB/s • Idle values measured at DOS prompt, maximum power saving • DMA controller with linked list support Shock and Vibration (N-style) • PIO mode 4 and bus master IDE up to 16 MB/s • Operating values measured at DOS prompt, no power saving • Master/slave transfer modes: BLT, ADOH, RMW, LOCK, • 40g / 11ms, 5 shocks in each direction • Three devices supported via local EIDE connector and rear I/O CPU Frequency Idle Operating RETRY, A32/A24/A16 and D64(MBLT)/D32/D16/D8 • 100g / 6ms, 5 shocks in each direction Mobile Celeron 300 MHz 1.9 A 2.8 A MIL-STD-1553 - DDC BU-61688 • 14g , 5 Hz to 2000 Hz, 30 minutes/axis rms Processor - Socket 370 (FCPGA) or BGA2 Mobile PIII 500 MHz 1.9 A 3.1 A • Device supporting BC, RT and MT mode, 128 KB shared RAM • Scalable processing power with flexible processor design Mobile PIII 700 MHz 2.0 A 3.5 A Test Reports (limited access to max. 8 KB shared RAM BU-61588 compatible) • Celeron: 566 MHz & mobile Celeron: 300 MHz Pentium III 700 MHz 2.0 A 5.0 A • Thermal and Shock & Vibration Test Reports are available. • Transceiver with long and short stub interface • Pentium III: 700, 850 MHz & Mobile PIII: 500, 700 MHz Pentium III 850 MHz 2.1 A 5.8 A Please contact the factory for more information. (please see price list for latest CPU versions) Serial I/O - RS-232/422/485 Mechanical • High efficiency on-board switching regulator (DC/DC) • Four asynchronous 16550-compatible full-duplex serial channels • 6U, 1-slot wide • Fanless cooling with heatsink • High-speed transfer up to 115.2 kb with 16 byte FIFOs Styles • 233mm x 160mm x 20mm (includes FlashDrive) • COM1-4: User selectable RS-232, RS-422, or RS-485 interface Performance MTBF *1 • 128MB RAM, 1024 x 768 64K color, ST34502LW HD Parallel Port E R N Styles C I • Calculations are available in accordance with • Two bi-directional Winstone 99 Front-panel � � - � � MIL-HDBK-217. Please contact factory for details. • IEEE 1284-compatible enhanced parallel port CPU Frequency Business High End (including EPP and ECP) Front stiffener - - Celeron 566 MHz 21.1 31.8 - - � Safety Mobile Celeron 300 MHz 18.5 22.0 Middle stiffener - - � � � • All PWBs are manufactured with a flammability rating of Floppy Mobile PIII 500 MHz 22.9 34.4 94V-0 by a UL recognized manufacturer. • One channel 3.5” floppy drive controller Wedge locks - - - - � Mobile PIII 700 MHz 24.9 40.6 • 720 KB and 1.44 MB Pentium III 700 MHz 24.9 40.6 Parts soldered Temperature Ranges (except N-style) - - � � � Pentium III 850 MHz 25.8 44.3 • Highest reachable operating temperature depends on processor USB 1.0 Li-Battery � - - - � type, speed and ambient conditions (airflow) as shown below • Two 12 Mb/s universal serial bus channels Chipset Ext. temperature - � � - � • All values under typical conditions without PMC module • Intel 82443BX (Intel 82443GX with 512 MB), 82371EB Keyboard and Mouse • Complete board may be limited to a smaller temperature range Conformal coating - - - � � • 100 MHz system bus with Pentium III and Mobile Pentium III • PS/2 compatible by mounted PMC module • 66 MHz system bus with Celeron Conduction cooled - - - - � Operating Storage • PCI burst mode transfers faster than 110 MB/s, 32-bit Real-Time Clock *1 with Mobile Pentium III and Mobile Celeron only Standard 0˚ to 70˚ C -40˚ to +85˚ C wide PCIbus (33 MHz) • RTC 146818 compatible Extended -40˚ to +70˚ C -40˚ to +85˚ C Cache CMOS RAM Rear I/O with Transition • Celeron level 1: 32 KB 70.0 • 114 bytes non-volatile CMOS RAM • Celeron level 2: 128 KB, full speed Module VTM1 • Pentium III level 1: 32 KB Backup 60.0 • Pentium III level 2: 256 KB, full speed • On-board Li-battery (500 mAh) or +5V standby • Values valid for Mobile processors 50.0 Function P2 (a+c) P2 (d+z) P0 EEPROM Memory - PC66/100 • 4 kbit serial EEPROM for non-volatile user data VGA 10-pin - - 40.0 • High-speed SDRAM Watchdog • 64 to 512 MB, 72-bit wide with error correction (ECC) 10/100Base-TX 10-pin - - 30.0 • Activates reset under software control (550 ms) • Rugged design with soldered chips *1 0m/s 1.0m/s 2.0m/s 3.0m/s 4.0m/s Multi-I/O 26-pin - - Temperature Sensor FlashDrive Airspeed Mobile PIII 500 LED on-board - - • Local and remote temperature (CPU case) software • Internal 1.8” IDE FlashDrive (up to 512 MB) for extended Mobile PIII 700 readable from -65˚C to +127˚C, 1.0˚C increments temperature range and higher shock/vibration immunity 44-pin, *2 Celeron 566 EIDE - - 2.0 mm PIII 700 NMI-Ticker 68-pin, PMC Extension Slot - IEEE P1386/1386.1 PIII 850 PMC - - 0.63 mm • User programmable NMI timer 0.3 to 18 ms • 32-bit/33 MHz PCIbus interface with front and rear I/O • Supports ccPMC Draft standard Vita 20 - 199x with N-style COM 1+2 (2) 10-pin - - Extended Temperature Ranges (N-style) LED • Operating: -40˚ to +85˚ C • On-board LED (red) user programmable COM 3+4 - (2) 10-pin - VGA and LCD - CT 69030/6900 • Storage: -55˚ to +105˚ C • 64-bit Windows accelerator and LCD flat panel interface LPT 1 - 26-pin - BIOS Features • Highest reachable operating temperature depends on processor • On-chip high-speed 4/2 MB synchronous DRAM (83 MHz) • AMIBIOS, in-system programmable Flash ROM, CPU, memory type, speed and ambient conditions (card edge temp.) • Flexible 9-, 12-, 15-, 18- or 24-bit panel TFT interface LPT 2 - - 26-pin and IDE auto-detection/selection • All values under typical conditions without ccPMC module CRT Resolutions CT 69030 CT 69000 • Integrated VGA, Ethernet and SCSI BIOS ROM • Complete board may be limited to a smaller temperature range by LCD 40-pin - - 1024x768 16M @ 100 Hz 64K @ 100 Hz • Password protection, BIOS post, system and video BIOS shadowing mounted ccPMC module 1280x1024 16M @ 75 Hz 256 @ 75 Hz SCSI 50-pin - • Extensive setup with remappable serial/parallel ports - 1600x1200 64K @ 60 Hz - CPU Frequency Max. Card Edge Temp. • Diskless, keyboardless, and videoless operation MIL-STD-1553 - - yes Mobile Celeron 300 MHz 85˚ C Fast Ethernet - AMD 79C973A Mobile PIII 500 MHz 85˚ C Power Requirements 26-pin, - Floppy - • 10/100 Mb/s controller with PCI local bus DMA 1.25 mm Mobile PIII 700 MHz 79˚ C • +5V: Required • 12 Kb FIFO buffers for Receive and Transmit *1 Multi-I/O connector with keyboard, mouse, two USB, reset, Pentium III 700 MHz 59˚ C • +3.3V, ±12V: Only if required by mounted PMC module watchdog, and speaker • 10BaseT and 100BaseTX auto-negotiation interface Pentium III 850 MHz 53˚ C *2 Additional 44-pin on-board connector for FlashDrive Max Tambient Specifications SCSI - SYM 53C860 Power Allowances - PMC Slot Humidity • SCSI controller with PCI local bus DMA • +5V, +3.3V: total power max. 7.5W • Operating: 5% to 95% @ 40˚C, 15,000 ft (4.5 km) altitude • SCSI transfer speed up to 20 MB/s • ±12V: 50 mA each • Storage: 5% to 95% @ 40˚C, 40,000 ft (12 km) altitude VME64 - Tundra Universe IIB • Active low power termination on-board • Industry standard CA91C142B PCI to VMEbus controller Power Consumption Shock and Vibration (C-, I-, E-, R-style) • Up to 60-70 MB/s transfer rate (64-bit MBLT, coupled transfer, EIDE • Typical current +5 Volt, 128 MB RAM without keyboard, • C-, I-style: 12g / 6ms, 2g @ 5Hz to 100Hz rms transfer rate depends on slave access speed) • Ultra ATA/33 sync. hard disk, modules, etc. • E-, R-style: 20g / 6Ms, 2g @ 5Hz to 2000Hz rms • Full VMEbus controller FIFOs for write posting • DMA mode up to 33 MB/s • Idle values measured at DOS prompt, maximum power saving • DMA controller with linked list support Shock and Vibration (N-style) • PIO mode 4 and bus master IDE up to 16 MB/s • Operating values measured at DOS prompt, no power saving • Master/slave transfer modes: BLT, ADOH, RMW, LOCK, • 40g / 11ms, 5 shocks in each direction • Three devices supported via local EIDE connector and rear I/O CPU Frequency Idle Operating RETRY, A32/A24/A16 and D64(MBLT)/D32/D16/D8 • 100g / 6ms, 5 shocks in each direction Mobile Celeron 300 MHz 1.9 A 2.8 A MIL-STD-1553 - DDC BU-61688 • 14g , 5 Hz to 2000 Hz, 30 minutes/axis rms Processor - Socket 370 (FCPGA) or BGA2 Mobile PIII 500 MHz 1.9 A 3.1 A • Device supporting BC, RT and MT mode, 128 KB shared RAM • Scalable processing power with flexible processor design Mobile PIII 700 MHz 2.0 A 3.5 A Test Reports (limited access to max. 8 KB shared RAM BU-61588 compatible) • Celeron: 566 MHz & mobile Celeron: 300 MHz Pentium III 700 MHz 2.0 A 5.0 A • Thermal and Shock & Vibration Test Reports are available. • Transceiver with long and short stub interface • Pentium III: 700, 850 MHz & Mobile PIII: 500, 700 MHz Pentium III 850 MHz 2.1 A 5.8 A Please contact the factory for more information. (please see price list for latest CPU versions) Serial I/O - RS-232/422/485 Mechanical • High efficiency on-board switching regulator (DC/DC) • Four asynchronous 16550-compatible full-duplex serial channels • 6U, 1-slot wide • Fanless cooling with heatsink • High-speed transfer up to 115.2 kb with 16 byte FIFOs Styles • 233mm x 160mm x 20mm (includes FlashDrive) • COM1-4: User selectable RS-232, RS-422, or RS-485 interface Performance MTBF *1 • 128MB RAM, 1024 x 768 64K color, ST34502LW HD Parallel Port E R N Styles C I • Calculations are available in accordance with • Two bi-directional Winstone 99 Front-panel � � - � � MIL-HDBK-217. Please contact factory for details. • IEEE 1284-compatible enhanced parallel port CPU Frequency Business High End (including EPP and ECP) Front stiffener - - Celeron 566 MHz 21.1 31.8 - - � Safety Mobile Celeron 300 MHz 18.5 22.0 Middle stiffener - - � � � • All PWBs are manufactured with a flammability rating of Floppy Mobile PIII 500 MHz 22.9 34.4 94V-0 by a UL recognized manufacturer. • One channel 3.5” floppy drive controller Wedge locks - - - - � Mobile PIII 700 MHz 24.9 40.6 • 720 KB and 1.44 MB Pentium III 700 MHz 24.9 40.6 Parts soldered Temperature Ranges (except N-style) - - � � � Pentium III 850 MHz 25.8 44.3 • Highest reachable operating temperature depends on processor USB 1.0 Li-Battery � - - - � type, speed and ambient conditions (airflow) as shown below • Two 12 Mb/s universal serial bus channels Chipset Ext. temperature - � � - � • All values under typical conditions without PMC module • Intel 82443BX (Intel 82443GX with 512 MB), 82371EB Keyboard and Mouse • Complete board may be limited to a smaller temperature range Conformal coating - - - � � • 100 MHz system bus with Pentium III and Mobile Pentium III • PS/2 compatible by mounted PMC module • 66 MHz system bus with Celeron Conduction cooled - - - - � Operating Storage • PCI burst mode transfers faster than 110 MB/s, 32-bit Real-Time Clock *1 with Mobile Pentium III and Mobile Celeron only Standard 0˚ to 70˚ C -40˚ to +85˚ C wide PCIbus (33 MHz) • RTC 146818 compatible Extended -40˚ to +70˚ C -40˚ to +85˚ C Cache CMOS RAM Rear I/O with Transition • Celeron level 1: 32 KB 70.0 • 114 bytes non-volatile CMOS RAM • Celeron level 2: 128 KB, full speed Module VTM1 • Pentium III level 1: 32 KB Backup 60.0 • Pentium III level 2: 256 KB, full speed • On-board Li-battery (500 mAh) or +5V standby • Values valid for Mobile processors 50.0 Function P2 (a+c) P2 (d+z) P0 EEPROM Memory - PC66/100 • 4 kbit serial EEPROM for non-volatile user data VGA 10-pin - - 40.0 • High-speed SDRAM Watchdog • 64 to 512 MB, 72-bit wide with error correction (ECC) 10/100Base-TX 10-pin - - 30.0 • Activates reset under software control (550 ms) • Rugged design with soldered chips *1 0m/s 1.0m/s 2.0m/s 3.0m/s 4.0m/s Multi-I/O 26-pin - - Temperature Sensor FlashDrive Airspeed Mobile PIII 500 LED on-board - - • Local and remote temperature (CPU case) software • Internal 1.8” IDE FlashDrive (up to 512 MB) for extended Mobile PIII 700 readable from -65˚C to +127˚C, 1.0˚C increments temperature range and higher shock/vibration immunity 44-pin, *2 Celeron 566 EIDE - - 2.0 mm PIII 700 NMI-Ticker 68-pin, PMC Extension Slot - IEEE P1386/1386.1 PIII 850 PMC - - 0.63 mm • User programmable NMI timer 0.3 to 18 ms • 32-bit/33 MHz PCIbus interface with front and rear I/O • Supports ccPMC Draft standard Vita 20 - 199x with N-style COM 1+2 (2) 10-pin - - Extended Temperature Ranges (N-style) LED • Operating: -40˚ to +85˚ C • On-board LED (red) user programmable COM 3+4 - (2) 10-pin - VGA and LCD - CT 69030/6900 • Storage: -55˚ to +105˚ C • 64-bit Windows accelerator and LCD flat panel interface LPT 1 - 26-pin - BIOS Features • Highest reachable operating temperature depends on processor • On-chip high-speed 4/2 MB synchronous DRAM (83 MHz) • AMIBIOS, in-system programmable Flash ROM, CPU, memory type, speed and ambient conditions (card edge temp.) • Flexible 9-, 12-, 15-, 18- or 24-bit panel TFT interface LPT 2 - - 26-pin and IDE auto-detection/selection • All values under typical conditions without ccPMC module CRT Resolutions CT 69030 CT 69000 • Integrated VGA, Ethernet and SCSI BIOS ROM • Complete board may be limited to a smaller temperature range by LCD 40-pin - - 1024x768 16M @ 100 Hz 64K @ 100 Hz • Password protection, BIOS post, system and video BIOS shadowing mounted ccPMC module 1280x1024 16M @ 75 Hz 256 @ 75 Hz SCSI 50-pin - • Extensive setup with remappable serial/parallel ports - 1600x1200 64K @ 60 Hz - CPU Frequency Max. Card Edge Temp. • Diskless, keyboardless, and videoless operation MIL-STD-1553 - - yes Mobile Celeron 300 MHz 85˚ C Fast Ethernet - AMD 79C973A Mobile PIII 500 MHz 85˚ C Power Requirements 26-pin, - Floppy - • 10/100 Mb/s controller with PCI local bus DMA 1.25 mm Mobile PIII 700 MHz 79˚ C • +5V: Required • 12 Kb FIFO buffers for Receive and Transmit *1 Multi-I/O connector with keyboard, mouse, two USB, reset, Pentium III 700 MHz 59˚ C • +3.3V, ±12V: Only if required by mounted PMC module watchdog, and speaker • 10BaseT and 100BaseTX auto-negotiation interface Pentium III 850 MHz 53˚ C *2 Additional 44-pin on-board connector for FlashDrive Max Tambient VR7 VR7 ™ ® Block Diagram Single Slot Celeron /Pentium III PC 6U VMEbus Embedded Computer Features ™ • Celeron 300 to 566 MHz ® • Pentium III 500 to 850 MHz • Low power mobile CPUs • Ultra compact, 1 slot only ® • Embedded NT, Windows 98, ® Windows 2000, ® Windows NT , QNX, ® ® VxWorks , MS-DOS • Up to 512 MB SDRAM with ECC • 1.8“ FlashDrive up to 512 MB • VGA/LCD up to 1600x1200 4(2) MB high-speed SDRAM • Fast Ethernet 10/100 Mb • MIL-STD-1553 • SCSI up to 20 MB/s TM ® VR7 is a 6U VMEbus all-in-one Celeron /Pentium III single board computer designed • Ultra ATA/33 to meet the needs of embedded application developers addressing markets like industri- Ordering Information al automation, medical, scientific, imaging, telecommunication, military and aerospace. • PMC extension slot • Four serial I/O with FIFOs Hardware Accessories VMEbus Software The ultra compact single slot, all-in-one design with flexible processor and memory VTM1 I/O transition module for VME-64x backplanes DOS-VME VME driver for MS-DOS RS-232/422/485 interface configurations, and an impressive array of on-board peripherals includes video interface, YPF01VM0C Front-panel 3U/4TE, with reset, LED, VGA, key- W98-VME VME-DLL and I/O driver for Windows 98 Ethernet, SCSI, optional MIL-STD-1553, and PMC extension. This combined with a cus- • Two IEEE 1284 parallel ports board, mouse, speaker, two USB1, for VTM1 WNT-VME2 VME-DLL and I/O driver for Windows NT tom specific assembly service provides optimized price/performance for all kinds of OEM SC304F Floppy disk 3.5”,19” box: 3U/4TE cable QNX-VME VMEbus driver for QNX • Two USB connectors applications. SC306HI10G0 IDE hard disk 3.5”,10 GB,19” box: 3U/6TE cable VxWorks see Operating Systems YLBCOM304A Ribbon cable for 2x COM, 3U/4TE front-panel Operating Systems • Watchdog, NMI ticker, YLBVGA304B Flat cable for VGA & 2x COM,3U/4HP front-panel Rugged needs are addressed with optional conduction cooling and extended temperature DOS-MD600x MS-DOS operating system temperature sensor YLBLPT308A Flat cable for LPT, Ethernet (RJ45), keyboard & range of up to -40˚ to +85˚ C, increased shock and vibration immunity using stiffener bars WIN-98xC Windows 98 operating system mouse (2x miniDIN), 3U/8TE front-panel WIN-NT4xC Windows NT 4.x operating system • Single +5 volt supply only and wedge locks, and conformal coating. Chassis WIN-2000xC Windows 2000 operating system SCC784TM05VR7 QNX-11252 QNX4 operating system • Optional -40˚/+85˚ C Special features include four serial channels with flexible RS-232 or RS-422 interfacing, Starter cage: 19”, 7U, 84TE card cage, 5x 6U VME-64 slots; QNX-11294 QNX4, Photon microGUI ® LCD controller and single +5V supply. Supported operating systems are Windows 2000, • Conduction cooling 3x fan, 250W power supply +3.3V/12A, +5V/22A, +12V/7A, VXW-BVX7 VxWorks board support package, Tornado 1 ® ® ® ® ® ® Windows NT , Windows 98, QNX, VxWorks , LynxOS , Linux , MS-DOS and others. -5V/0.3A, -12V/0.8A, EMC, CD-ROM, 3.5” floppy drive, (without SCSI driver, with VMEbus driver) • High shock and vibration 10 GB hard disk, I/O transition module (VTM11) with front panels VXW2-BVX7 VxWorks board support package, Tornado 2 (YLBCOM304A, YLBVGA304A, YLBLPT308A), 0˚C/+50˚ C, (with VMEbus driver) immunity with stiffener bars use for VR76xxxx-xxxx and VR78xxxx-xxxx only WIN-ENT4xE Windows Embedded NT 4.x and wedge locks Special chassis, supplies, backplanes and drives upon request. • Conformal coating 6301 Chapel Hill Road, Raleigh, NC 27607-5115 • Custom specific, low cost Tel 919.851.1101 • Fax 919.851.2844 • info.government@sbs.com • www.sbs.com assembly versions Memminger Str. 14, D-86159 Augsburg Germany Tel +49 (821) 5034-0 • Fax +49 (821) 5034-119 • info.government@sbs.com • www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2002 SBS Technologies, Inc. 20020423 embedded computing preferred… SINGLE BOARD COMPUTERS AND CPUS