GE Intelligent Platforms VR11 Rugged 6U VME64 SBC with Dual Core 32- or 64-bit Processor Features The VR11 is a 6U VME64 CPU board featuring dual Versions with front panel I/O are available in core processing performance and dual Gigabit various configurations with one or two PMC • Intel® Core™2 Duo processor up to 2.16 GHz Ethernet channels. The Intel dual core processor interfaces. The PMC1 interface can be ordered as • Ultra compact, two slots includes two optimized execution cores in a single a XMC interface instead. • Extensive Software support processor case. This enables execution of parallel • Up to 4 GB DDR2 SDRAM (200 MHz) with ECC threads or applications on separate cores with Supported operating systems are Windows®, • Flash Drive or local UDMA2 (ATA33) 2.5” hard dedicated CPU resources. The VR11 supports 32- Linux®, VxWorks® and Solaris. Integrity is disk and 64-bit processor architecture. VR11 is available on request. designed to meet the requirements of markets • 2x SATA, RAID 0/1 capable like the automation, simulation/training, test and • Front/rear VGA up to 1280x1024, rear DVI-I up Specifications measurement, and others. to 1280x1024, 32 MB RAM Processor • Intel Core 2 Duo Processor at 2.16 GHz or LV @ 1.5 • Two Gigabit Ethernet ports 10/100/1000 BaseT Supporting both Intel Core 2 Duo and Intel Core GHz front or rear optional Duo processors, the platform offers up to 2.16 • Intel Core Duo @ 2 GHz or LV @ 1.66 GHz • Compliant to VITA31.1-2003 • Intel ULV Celeron M Processor @ 1.07 GHz GHz of processing speed with 4 MB L2 cache. 4 MB cache (Core 2 Duo options), 2 MB (Core Duo • • One front Fast Ethernet port options), and 1 MB (Celeron M option) Rugged needs are addressed with an extended • Two PMC extension slots, one 64-bit/133 MHz • 667 MHz system bus temperature range of -40 °C to +85 °C (depends and one 32-bit/33 MHz SDRAM on selected board option) and conformal coating • Maximum memory configuration of 4 GB DDR2 • One XMC interface on request SDRAM with ECC via a 400 MHz memory bus is available on request. • 2x serial I/O with FIFOs Compact Flash RS-232/422/485 interface • CompactFlash up to 4 GB accessible through The VR11 provides a unique feature set, including secondary IDE port • 4x USB 2.0 ports, two front and two on rear up to 4 GB of DDR2 SDRAM (200 MHz) with • CompactFlash may be configured as the boot device • Audio codec enhanced ECC, four independent on-board PCI through the BIOS boot device set-up • Watchdog, temperature sensors buses, support for VME64/2eSST backplane, two BIOS • The VR11 System BIOS and Video BIOS are provided in PMC interfaces (64-bit/133 MHz and 32-bit/33 • Optional –40 °C to +85 °C reprogrammable flash memory. MHz). Instead of the PMC1, a PCI Express based • Optional conformal coating Ethernet XMC interface is optionally available. A high level • Dual Gigabit Ethernet interface via the Intel 82571EB • Customer specific, low cost assembly versions of functional integration (two Gigabit Ethernet, via front panel (not conduction cooled style) • RoHS compliant • VITA 31.1-2003 compliant one Fast Ethernet, two serial interfaces (RS-232 or • One 10/100 Ethernet via front panel (not conduction RS-422/485), USB 2.0, integrated HDD or Flash cooled style) drive) within a single slot gives users the freedom USB Ports to use the PMC interfaces for their application Four USB 2.0 ports: two to rear I/O via P2, and two to • specific I/O. The VGA/DVI interface is supported front panel (not conduction cooled style) • Supported USB features include: isochronous data through a high performance 2D/3D ATI® video transfers, asynchronous messaging, self-identification controller capable of driving two displays in and configuration of peripherals, and dynamic (hot) parallel. attachment VR11 - Rugged 6U VME64 SBC with Dual Core 32- or 64-bit Processor Block Diagram Specifications VMEbus Backplane Interface The VR11 meets the VME320 protocol, based on the • Tundra Tsi148, the VMEbus can run at a bandwidth of up to 320 MB/s along the full length of a 21-slot backplane • Backward compatible to VME64 Serial Ports • Two 16550 compatible serial ports via DB-9 connectors: COM1 optionally routed to front panel, COM2 routed to P2 • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud PMC Extension Slot • PMC1 (64-bit/133 MHz) and PMC2 (32-bit/33 MHz), XMC optional on PMC1 • PMC2 not available with VGA/Gigabit Ethernet on the front or IDE installed PMC1 signaling is 3.3 V only, PMC2 signaling is 5 V • tolerant Audio Line In, CD In • • Headphone, SPDIF Out AC97 link with codec, 0 to 70 C only • Programmable Timers • Two 16-bit timers and two 32-bit timers Mapped in PCI memory space • • Completely software programmable and can generate PCI bus interrupts Watchdog Timer • Programmable Intervals Interrupt and board reset triggers • Nonvolatile SRAM • 32 KB of nonvolatile SRAM Dimensions Front and Rear I/O (with transition module VTM22) Power Requirements • 6U (4HP) single slot Eurocard form factor • +5 VDC (±5 percent), A (typical), A maximum Function Front Air Cooled Rear P2/P0 • Height 9.2 in. (233.4mm) • +3.3 VDC (±5 percent), A (typical), A maximum Depth 6.3 in. (160mm) DVI-I — 9¹ • • +12 VDC (±5 percent), 0 mA • Thickness 0.8 in. (20.3mm) VGA 9³ 9¹ • -12 VDC (±5 percent, 0 mA Gigabit Ethernet 1 9²,³ 9² Temperature Gigabit Ethernet 2 9²,³ 9² Styles Fast Ethernet 9 — Function Style 1 Style 3 Style 6 Style 8 Range Operating Storage Reset 9 9 Front Panel yes yes yes no Air Cooled LEDs 9 9 Front Stiffener no no no yes Style 1 0° to 55° C –40° to 85° C USB 2.0 1-4 1-2 3-4 Middle Stiffener no no yes yes IDE (ATA100) — 9 Style 3/6 –40° to 75° C –40° to 85° C Wedge Locks no no no yes Conduction Cooled Function Front Air Cooled Rear P2/P0 Parts Soldered yes yes yes yes Style 8 –40° to 80° C –55° to 105° C IDE (ATA33) onboard³ Li-Battery yes yes no no Style 9 –40° to 85° C –55° to 105° C SATA 1 9 Ext. Temperature no yes yes yes SATA 2 9 Humidity Conformal COM 1-2 1 1-2 no no yes yes • Operating and Storage: 5 – 95% @ 40 C, non- Coating Audio 9 condensing Conduction 5 GPIO (8-pins) — 9 no no no yes Cooled Altitude PMC 1 (XMC on req.) 9 9 • Operating: 15,000 ft. (4.5 km); Storage: 40,000 ft. (12 PMC 2 I/O 9³ 9³ km) Software 1 Rear DVI-I connector for DVI and VGA The following software is supported to the extent • Shock and Vibration 2 Either front or rear as an order option listed below. 3 The 32-bit/33 MHz PMC2 slot is not available with VGA or • Shock: 100g/6ms, and 40g/11ms, halfsine, 5 hits per Ethernet on the front or with IDE installed. direction, 3 axis OS On Request Planned 4 Full PMC 2 rear I/O without IDE primary used • Vibration: 14 grms from 5 hz to 2000 hz (flat) for 60 Windows 9 Partly PMC 2 rear I/O with IDE primary used mins each axis 5 DVI-I (DVI-D pins) are shared with GPIO pins Linux 9 VxWorks 9 Integrity 9 GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 09.10 GFA-854A