GE Intelligent Platforms VP11 6U VME64 SBC with Dual Core 32- or 64-bit Processor The VP11 is a 6U VME64 CPU board with inte- VME64/2eSST backplane, two PMC interfaces Features grated dual core Intel Core 2 Duo Processor (64-bit/133 MHz and 32-bit/33 MHz). Instead ® ™ • Intel Core 2 Duo processor LV, 1.5 GHz or Intel Core Duo Processor and dual Gigabit of the PMC1 a PCI Express based XMC inter- • Intel Core Duo processor 1.66 GHz and Ethernet channels. The Intel dual core proces- face is optionally available. A high level of 2.0 GHz sor includes two optimized execution cores in functional integration (two Gigabit Ethernet, • Ultra compact, two slots a single processor case. This enables execu- one Fast Ethernet, two serial interfaces (RS- • Extensive software support tion of parallel threads or applications on 232 or RS-422/485), USB 2.0, integrated HDD separate cores with dedicated CPU resources. or Flash drive) within a single slot gives users • Up to 4 Gbyte DDR2 SDRAM (200MHz) The VP11 supports a 32- and 64-bit proces- the freedom to use the PMC interfaces for with ECC sor architecture. The VP11 is designed to their application specific I/O. The VGA/DVI • Flash Drive or local UDMA2 (ATA33) meet the requirements of markets such as interface is supported through a high perfor- 2.5” hard disk ® automation, simulation/training, test and mance 2D/3D ATI video controller capable of • 2x SATA, RAID 0/1 capable measurement, and others. driving two displays in parallel. • Front/rear VGA up to 1280x1024, rear DVI-I Based on the Intel Core Duo Processor, the Versions with front panel I/O are available up to 1280 x 1024, 32 Mbyte RAM platform is designed to support processor in various configurations with one or two • Two Gigabit Ethernet ports 10/100/1000 speed from 1.66 GHz up to 2.0 GHz. The Intel PMC interfaces. The PMC1 interface can be BaseT front or rear optional Core 2 Duo runs at 1.5 GHz. VP11 is offered in ordered as a XMC interface instead. • Compliant to VITA31.1-2003 a dual slot wide front panel in order to maxi- ® • One front Fast Ethernet port Supported operating systems are Windows , mize front I/O functions. ® ® Linux, VxWorks and Solaris. Integrity is • Two PMC extension slots, one 64-bit/133 The VP11 provides a unique feature set, available on request. MHz and one 32-bit/33 MHz including up to 4 Gbyte of DDR2 SDRAM • One XMC interface on request (200 MHz) with enhanced ECC, four inde- • 2x serial I/O with FIFOs pendent on-board PCI buses, support for RS-232/422/485 interface • 4x USB 2.0 ports, two front and two on rear • Audio codec • Watchdog, temperature sensors • Optional –40 °C to +75 °C • Optional conformal coating • Customer specific, low cost assembly versions • RoHS compliant VP11 6U VME64 SBC with Dual Core 32- or 64-bit Processor Fast Ethernet – Intel 82551 USB 2.0 – 6300ESB Specifications • Single channel Ethernet Controller • Two USB 2.0 channels on rear I/O VME64, 2eSST - Tundra TSI148 • 10/100BaseT auto-negotiation • Two USB 2.0 channels on front • Industry standard PCI to VME bus controller • Front I/O Keyboard, Mouse • Full VME bus system controller Hard Disk or Flash Drive • Via USB • FIFOs for write posting, DMA controller with linked • Legacy PS/2 controller emulation list support • Internal 2.5” UDMA100 IDE hard disk or Flash Drive • Geographical addressing for extended temperature range and higher Real-time clock shock/vibration immunity) • RTC 146818 compatible Protocols supported: • Li-battery • A16, A24, A32, and A64 address modes Serial I/O - RS232/422/485 • D8, D16, D32 Single Cycle Transaction (SCT) • Two async. 16550 compatible full duplex serial CMOS RAM • D8, D16, D32 Block Transaction (BLT) channels at rear I/O • 242 bytes non-volatile CMOS RAM for BIOS use • D64 Multiple Block Transaction (MBLT) • High-speed transfer up to 115.2 Kbaud with EEPROM 16 byte FIFOs • D64 2eVME, D64 2eSST • 512 Kbit serial EEPROMs for non-volatile user data • User selectable RS232/422/485 interface • As VME Master Read-Modify-Write (RMW) generation, and RETRY* as a termination from the external • COM1 optionally available at front Floppy VMEbus slave. PMC Extension Slots - IEEE P1386/1386.1 • Via USB • PMC1 (64-bit/133 MHz) and PMC2 (32-bit/33 MHz), Protocols not supported: Watchdog XMC optional on PMC1 • A40, D32 MBLT, VMEbus lock commands • Intel TCO timer • Enhancement to processor PMC standard • As slave RMW cycles are not guaranteed indivisible • Intel 6300ESB watchdog VITA 32-2003 (non-monarch) on the PCI bus • PMC1 signaling is 3.3 V only, PMC2 signaling is Timer 5 V tolerant. Processor - µFCBGA, Low Power Design • Integrated in 6300ESB chipset • Scalable processing power with flexible ® ™ VGA and DVI – ATI X300 • Legacy PC-AT timer processor design • 256-bit 3D and 2D graphics accelerator • High Precision Event Timer (HPET) • Supports 32-bit and 64-bit processor architecture • On-chip up to 32 Mbyte frame buffer • 64-bit: Intel Core2 Duo processor: 1.5 GHz Temperature Sensors • PCI Express x4 interface • 32-bit: Intel Core Duo processor: 1.66 GHz and 2.0 GHz • CPU die, Intel E7520 and pcb temperature software • Dual CRT/Simultaneous Dual Display (same or readable in the range of –55 °C to +125 °C • High efficiency on-board switching regulator (DC/DC) different surfaces) • Fanless cooling with heat sink • Integrated 400 MHz Palette DAC for analog VGA LED (not in conduction-cooled style) * Contact factory for latest CPU versions monitors up to 1280 x 1024 • Front panel ACPI System Status Indicator LED ® • Single channel DVI-I interface PanelLink for TFT (red/amber/green) Processor Level 2 Cache displays up to 1280 x 1024 true color (EDID displays Core 2 Duo 4 MB Audio PnP supported) Core Duo 2 MB ® • Line In, CD In • Fully compliant support for OpenGL for all Windows ® • Headphone, SPDIF Out operating systems and Linux Chipset – Intel E7520/6300ESB • AC97 link with codec • Versions with front or rear I/O available • 667 MHz front side bus to processor • 0 °C to +70 °C only (tbd) • Four parallel PCI Express connections to major EIDE – 6300ESB components for maximum I/O throughput BIOS Features • Ultra ATA/100 sync. DMA mode up to 100 Mbyte/s • AMI BIOS Core 8, in-system programmable Flash ROM • PIO mode 4 and bus master IDE up to 16 Mbyte/s Memory – DDR2-400 • Automatic system configuration • One device via on board connector and • High-speed registered DDR2 SDRAM with 400 MHz • Integrated VGA, SATA RAID and Ethernet PXE ROM one via rear I/O • 144-bit wide with enhanced error correction (ECC) • USB Mass Storage support • 32-bit CPU: up to 2 GB soldered memory General Purpose I/O • Password protection • 64-bit CPU: up to 4 GB soldered memory • Eight GPIO (input or output) pins. Pins are shared • Headless support with DVI-I. • Remote console through serial port Dual Gigabit Ethernet – Intel 82571EB • Software configurable • Dual Channel Ethernet Controller with PCI Express x4 interface • 10/100/1000BaseT auto-negotiation • Front and rear I/O • Compliant to VITA31.1-2003 VP11 6U VME64 SBC with Dual Core 32- or 64-bit Processor Software Styles Mechanical – PICMG 2.0 • The following software is supported to the extent • 6U, 2 slots wide, (233 x 160 x 40) mm with Flash Drive Function Style 1 Style 3 Style 6 Style 8 listed below. or hard disk Front Panel yes yes yes no OS On Request Planned Temperature Parts Soldered yes yes yes yes ® Windows √ Li-Battery yes yes no no • Note: For detailed information about the operating ® Linux √ temperature behavior of the board of any style Ext. Temperature no yes yes yes ® VxWorks √ it is absolutely necessary to consult the manual. Power Requirements Integrity √ The processor type and speed, altitude, the use or • +5 V, +3.3 V, +12 V Required not use of Ethernet and video, ambient condi- Front and Rear I/O (with transition module VTM22) • -12 V If required by mounted PMC module tions and the type of cooling influences the board • The pin outs of the transition module connectors temperature range. Power Consumption - typical operating current (rear I/O) correspond to standard PC connectors • Without keyboard, hard disk, modules, Ethernet (no (press-fit cables). Temperature link), measured at DOS prompt, no power savings. Function Front Rear • All values under typical conditions without Processor 5 V 3.3 V Total Power PMC module Air Cooled P2/P0 Core 2 Duo, 1.5 GHz 1, 4, DVI-I - √ Range Operating Storage Core Duo, 1.66 GHz 1, VGA √ √ Standard 0 °C to +55 °C –40 °C to +85 °C Core Duo, 2 GHz 2 2 Gigabit Ethernet 1 √ √ Extended –40 °C to +75 °C –40 °C to +85 °C 2 2 Gigabit Ethernet 2 √ √ • Without keyboard, hard disk, modules, Windows XP, Fast Ethernet √ - 3D graphics active. Both Gigabit Ethernet channels Operating Storage linked, CPU running at instruction mix for maximum Reset √ √ Humidity 5 – 95 % @ 40 °C 5 – 95 % @ 40 °C power consumption. LEDs √ √ Altitude 15,000 ft. (4.5 km) 40,000 ft. (12 km) USB 2.0 1-4 1-2 3-4 Processor 5 V 3.3 V Total Power IDE (ATA100) √ Shock and Vibration Core 2 Duo, 1.5 GHz 3 IDE (ATA33) onboard • Designed to meet VITA47 class EAC1 and EAC3 Core Duo, 1.66 GHz SATA 1 √ Core Duo, 2 GHz VITA 47 SATA 2 √ • Designed to meet VITA47 class EAC1 and EAC3 Power Allowances – PMC slots COM 1-2 1 1, 2 • +5 V, +3.3 V: Total power max. 7.5 W MTBF Audio √ • ±12 V: 100 mA each • Calculations are available in accordance with 4 GPIO (8 pins) - √ MIL-HDBK-217. Please contact GE Intelligent Platforms. PMC 1 (XMC on req.) √ √ 3 Safety PMC 2 I/O √ √ 1 • Designed to meet standard UL1950, CE class A, FCC-A Rear DVI-I connector for DVI and VGA 2 Either front or rear as an order option 3 Full PMC 2 rear I/O without IDE primary used Partly PMC 2 rear I/O with IDE primary used 4 DVI-I (DVI-D pins) are shared with GPIO pins VP11 6U VME64 SBC with Dual Core 32- or 64-bit Processor Block Diagram Intel Core2 Duo Core Duo Processor PCI-E DDR2 SDRAM PMC1 with ECC (64-bit/133 MHz) PCI-X (4 GB) Intel Intel PCI-E E7520 PCI-E VGA/DVI 6700PXH PCI-E Dual Gigabit Ethernet VME PCI/VME Bridge PCI SATA PMC2 (32-bit/33 MHz) COM PCI Intel Fast Ethernet 6300ESB LPC GPIO USB AC97 EIDE Audio Ordering Information Hardware Accessories VTM22: I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) SCC784UM05VP11R: 7U, 19” starter cage with 5 VME64 slots, backplane, HDD, DVD, power supply Operating Systems Extensive operating systems support is available, (see page 2 of this document). Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Intelligent Platforms. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-853A VME Backplane