GE Intelligent Platforms CPCI-7808 ® ® ® ® Intel Pentium M/Celeron M Universal CompactPCI Single Board Computer Features The CPCI-7808 is GE Intelligent Platforms Specifications answer to the expanding array of embedded • Processor speeds up to 1.8 GHz Processor computing challenges facing many industries • Up to 2 GB DDR SDRAM • Intel Pentium M processor with either 1.4 GHz, today. This SBC is the market leader in perfor- 1.6 GHz, or 1.8 GHz or Intel Celeron M at 1.3 GHz • IDE interface for hard disk drive and mance, with benefits including: • Advanced L2 cache CompactFlash support • Guaranteed support for five years as part of – 2 MB (1.4 GHz and 1.8 GHz Pentium M) – 1 MB (1.6 GHz Pentium M) • Dual 10/100/1000BaseTX Ethernet the Embedded Roadmap supported by Intel – 512 K (1.3 GHz Celeron M) ® • User configurable PICMG 2.16, providing • 64-bit/66 MHz CompactPCI bus interface • 400 MHz system bus Ethernet across the backplane as well as • Utilizes the Intel 855GME chipset and Intel 6300ESB • Integrated video controller supporting IPMI PICMG 2.9 I/O controller hub • VGA and digital LVDS video available • Pentium M 1.4 GHz option for the most SDRAM via rear I/O power sensitive applications • Up to 2 GB DDR SDRAM via one SODIMM • User programmable watchdog timer • Extensive serial connections via optional rear CompactFlash ® transition board allows for utmost flexibility • Operating system support for Windows 2000, • Up to 1 GB of CompactFlash via the optional ACC-0591 ® ® ® Windows XP, QNX, Linux, and VxWorks GE Intelligent Platforms CPCI-7808 is a single Ethernet • Two 10/100/1000BaseT Ethernet ports slot CompactPCI single board computer (SBC) – Front panel Ethernet Interface is software select that offers low power consumption via Intel’s able front or rear (PICMG 2.16) Pentium M and Celeron M processors, but – Second interface is PICMG 2.16 compatible only still delivers a solution with the robustness, • Intel 82546EB Ethernet controller reliability and high performance required for Graphics your demanding embedded computing appli- • Intel 855GME graphics memory controller cations. The CPCI-7808 features a 400 MHz • Up to 1600 x 1200 resolution system bus and incorporates Intel’s 855GME • VGA and digital LVDS video available via rear I/O graphics memory controller with up to 2 GB PMC Expansion Dual Data Rate (DDR) SDRAM. • Two PMC expansion sites – No. 1 PMC site is 3.3 V 64-bit/66 MHz PCI The CPCI-7808 is ideal for I/O intensive appli- – No. 2 PMC site is 5.0 V 32-bit/33 MHz PCI cations, offering dual PMC sites (64-bit/66 • IEEE 1386.1 compliant MHz PCI and 32-bit/33 MHz PCI), parallel and Serial Interfaces serial ATA, CompactFlash option (available on • Two 16550-compatible serial ports rear transition utility board), dual integrated – One accessible via RJ45 connector on front panel – Second serial port available via rear I/O serial ports, and three USB ports. ® ® CPCI-7808 Intel Universal CompactPCI Single Board Computer Specifications (continued) Block Diagram Other Interfaces • One USB 2.0 port on front panel PMC I/O • Two USB 2.0 ports via rear panel USB x2 • Dual serial ATA via rear panel Intel Pentium M • One PS/2 port for keyboard and mouse J5 or Celeron M SATA x2 DDR SDRAM Processor • IDE and floppy disk support SODIMM Up to 1.8 GHz IDE 64/66 PMC • Hardware reset on front panel w/ECC Processor Site Up to 2.0 Gbyte • Status LEDs on front panel System Bus • User programmable watchdog timer Intel 855GME SVGA System Memory Bus PICMG Compliance Graphics and Digital LVDS Video Memory Controller • Supports Intelligent Platform Management Inter- Hub (GMCH) face (IPMI) architecture (PICMG 2.9 Rev. 1.5) • High availability hot swap (PICMG 2.1 Rev. 2.0) • Ethernet on the backplane (PICMG 2.16 Rev. 1.0) 32/33 PMC Site • Universal signaling support (PICMG 2.0 Rev. 3.0) Intel 6300ESB I/O Controller Front Panel Status LEDs Hub • Primary IDE interface activity J3 (ICH) • Board status IPMI • Power • Hot swap 64/66 MHz PCI Bus • LAN activity (located on each RJ45) LPC/FWH Operating System Support Bus BIOS • Windows 2000 J2 10/100/1000 • Windows XP Intel 82546GB or Ethernet • QNX Switch Intel 82546EB Dual Ethernet • Linux Controller Rear I/O • VxWorks Ethernet Indicators COM2 Power Requirements (Pentium M 1.4 GHz) USB 2.0 • +5 VDC (+5%, -3%), 3.2 A (typical), 6.4 A maximum Floppy Super I/O COM1 • +3.3 VDC, (+5%, -3%), 2.1 A (typical), 4.2 A maximum Keyboard/Mouse J1 • ±12 VDC (+5%, -3%), 50 mA maximum Universal Reset Switch Power Requirements (All Other Processors) and Status PCI-to-PCI Indicators Bridge • +5 VDC (+5%, -3%), 4A (typical), 8.8 A maximum • +3.3 VDC, (+5%, -3%), 2.1 A (typical), 5.2A maximum • ±12 VDC (+5%, -3%), 50 mA maximum Environmental Specifications Ordering Information • Operating: 0 to +65 °C VMICPIC-7808-410000 • Storage: -40 to +85 °C 6U CPCI PICMG 2.16 SBC with 1.6 GHz Pentium M processor, 512 MB DDR SODIMM, Ethernet, SATA, serial ports, PMC • Relative humidity: 5% to 95%, noncondensing sites, 64-bit/66 MHz bus Interface, IPMI, USB Shock VMICPIC-7808-510000 • 10 Gs, 16 ms half sine, 6 axis, 10 pulses each 6U CPCI PICMG 2.16 SBC with 1.8 GHz Pentium M, 1 GB DDR SDRAM, Ethernet, SATA, serial ports, PMC, 64-bit/66 MHz bus interface, IPMI, USB Vibration CompactPCI Rear Transition Utility Board • 6 Gs RMS (20 – 2000 Hz) random, 0.0185 G2 The ACC-0591 installs in the rear transition area of the CPCIbus backplane. The ACC-0591 is sold separately. per Hz spectrum Dimensions Note: All CPCI single board computer products come standard with a CPCI specification compliant front panel. • 6U single slot Eurocard form factor • Height: 9.2 in. (233.4 mm) • Depth: 6.3 in. (160 mm) • Thickness 0.8 in. (20.3mm) GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 01.10 GF GFA-670A A-670A